Undo the screw at the bottom center. It will pull apart.
On 1/16/06, Kaleb C. Striplin <[EMAIL PROTECTED]> wrote:
>
> I just bought one at autozone, 1 7/8 I think was the size, it worked
> well but was 10 bucks for 1 socket. Next question, how do you remove the
> outer tube part to clean up the in
If it is the same as 123 unit a pair of channel lock pliers works fine. Did
several that way with them with no problems.
Bruce
"Kaleb C. Striplin" <[EMAIL PROTECTED]> wrote: What size socket is needed to
remove the fuel tank sending unit? (126).
Before I have taken a chisel and was able
January 16, 2006 7:06:25 PM
Subject: Re: [MBZ] size of fuel sending unit
thanks dude.
Marshall Booth wrote:
Kaleb C. Striplin wrote:
I just bought one at autozone, 1 7/8 I think was the size, it worked
well but was 10 bucks for 1 socket. Next question, how do you remove the
outer tube par
that's a good one for the files section of your website Kaleb
- Original Message
From: Kaleb C. Striplin <[EMAIL PROTECTED]>
To: Mercedes Discussion List <[EMAIL PROTECTED]>
Sent: Monday, January 16, 2006 7:06:25 PM
Subject: Re: [MBZ] size of fuel sending u
thanks dude.
Marshall Booth wrote:
Kaleb C. Striplin wrote:
I just bought one at autozone, 1 7/8 I think was the size, it worked
well but was 10 bucks for 1 socket. Next question, how do you remove the
outer tube part to clean up the inside?
Here's EVERYTHING I know about it:
Tools Nee
Kaleb C. Striplin wrote:
I just bought one at autozone, 1 7/8 I think was the size, it worked
well but was 10 bucks for 1 socket. Next question, how do you remove the
outer tube part to clean up the inside?
Here's EVERYTHING I know about it:
Tools Needed:
1-13/16" socket
8mm socket or wren
On Mon, 16 Jan 2006 18:03:40 -0600 "Kaleb C. Striplin"
<[EMAIL PROTECTED]> wrote:
> > There is a little nub of a screw on the bottom. Pliers used on
> > it gently ought to unscrew the bottom.
>
> I saw something on the bottom but was not sure what it was, will check
> it out.
Hey, Kaleb! Look a
I saw something on the bottom but was not sure what it was, will check
it out.
Jim Cathey wrote:
I just bought one at autozone, 1 7/8 I think was the size, it worked
well but was 10 bucks for 1 socket. Next question, how do you remove
the
IIRC, the entire 3/4" set, 20 (?) sockets plus ratc
I just bought one at autozone, 1 7/8 I think was the size, it worked
well but was 10 bucks for 1 socket. Next question, how do you remove
the
IIRC, the entire 3/4" set, 20 (?) sockets plus ratchet, T bar,
and extension is about $30 on sale. Or maybe $40. Either way,
worth having.
outer tube
I cant get any in there on the 126, not enough room.
LT Don wrote:
I have always been able to remove mine (W123, of course) with a pair of
Channel Locks.
On 1/16/06, Kaleb C. Striplin <[EMAIL PROTECTED]> wrote:
What size socket is needed to remove the fuel tank sending unit? (126).
Before I
PM
To: Mercedes Discussion List
Subject: Re: [MBZ] size of fuel sending unit
Was there not a thread on here a while back that suggested a spark plug
socket was the right size? You use it sort of backwards. The extension needs
to go in through the end where the plug normally would and the hex end o
On Monday, Jan 16, 2006, at 15:38 US/Eastern, Kaleb C. Striplin wrote:
What size socket is needed to remove the fuel tank sending unit? (126).
Before I have taken a chisel and was able to turn it by beating it with
a hammer and chisel in the proper direction but no luck so far. Dont
have a soc
I have always been able to remove mine (W123, of course) with a pair of
Channel Locks.
On 1/16/06, Kaleb C. Striplin <[EMAIL PROTECTED]> wrote:
>
> What size socket is needed to remove the fuel tank sending unit? (126).
> Before I have taken a chisel and was able to turn it by beating it with
> a
-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Kaleb C. Striplin
Sent: Monday, January 16, 2006 12:39 PM
To: Mercedes mailing list
Subject: [MBZ] size of fuel sending unit
What size socket is needed to remove the fuel tank sending unit? (126).
Before I have taken a chisel and was
What size socket is needed to remove the fuel tank sending unit? (126).
46mm, IIRC. I have a cheap on-sale Harbor Freight 3/4" metric socket
set I use for this, and other big duties.
-- Jim
What size socket is needed to remove the fuel tank sending unit? (126).
Before I have taken a chisel and was able to turn it by beating it with
a hammer and chisel in the proper direction but no luck so far. Dont
have a socket big enough and would buy one but not sure what size.
--
Kaleb C. St
16 matches
Mail list logo