Thanks, Mitch. Still thinking about SLKs but something came up that's
taking my time.
That does look like it might be a good buy. If I were closer I'd sure check
it out.
Gerry
-
From: Mitch Haley m...@voyager.net
FWIW: The following was posted on another list by a British member.
Gerry
---
A disturbing Ministry of Trade report circulating in the Kremlin today is
raising serious concerns over the United States plan to shut down
significant parts of the Internet on 8 March in a
All this aeronautical stuff and nobody can spell chord. Makes one
wonder.
And just recently on a music-oriented list somebody was going
on and on about microphone chords...
-- Jim
___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
He's In Search of the Lost Chord...
http://www.youtube.com/watch?v=ytfX4al_1qE
Ohhh snap.. I've been wogered. ;)
Grant...
On Thu, Feb 16, 2012 at 9:30 PM, relng...@aol.com wrote:
All this aeronautical stuff and nobody can spell chord. Makes one wonder.
RLE, acid trippin again
I am attempting to make a dvd. I have a Powerbook g4 and an LG ge24
external drive as the internal is shot in the mac. I am using Magic iDVD
and it is taking forever. I set it all up and pressed the burn button 10
1/2 hours ago and it says it still has over 8 hours to go. It is probably
That Goodman furnace Mitch linked a week or two ago was not much more
than what the repair cost on this Bryant. Next time I'm going to have
to think about just replacing. It's sad in a way when a major appliance
like a furnace is almost a disposable item.
On Fri, Feb 17, 2012, at 01:09 AM,
I would bet money on a bad head gasket between 4 and 5. Repeat your test a
few times, cold and hot just for comparison. If the numbers continue to
match between the two the gasket is likely at fault.
Mike
On Feb 16, 2012 6:28 PM, glenn brown g_010...@hotmail.com wrote:
I've posted a query
You might want to call around to some other repair people, they often
have boards they have pulled from old units that are still functional,
as when someone upgrades or whatever. Any foreclosure houses in your
neighborhood?
--R
On 2/17/12 10:27 AM, Allan Streib wrote:
That Goodman furnace
There are some other DVD burner programs that might work better, lots of
free ones you could download and try. google mac dvd burn program
--R
On 2/17/12 10:24 AM, Michael Canfield wrote:
I am attempting to make a dvd. I have a Powerbook g4 and an LG ge24
external drive as the internal
I did do some googling and from what I read iDVD is supposed to work as
well or better than what I can find for free. Not saying I know this for
fact. Just what I gathered so far. I think I am just asking a lot out of
an old, small computer and it is just going to be slow but I would like to
http://charleston.craigslist.org/ctd/2841809820.html
No pics
--R
___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
I am attempting to make a dvd. I have a Powerbook g4 and an LG ge24
external drive as the internal is shot in the mac.
How is the drive connected? That may be a significant bottleneck.
Our G4 will make a DVD in about an hour IIRC, I think its (internal)
drive can only burn at 1x. This is
Our G4 will make a DVD in about an hour IIRC, I think its (internal)
drive can only burn at 1x. This is just a ripped copy of a commercial
DVD, for example, not authoring anything.
It's the authoring with attendant compression that makes it slow. Think
ripping MP3s from CDs, only much worse.
Snagged a 6th Gen 80gb video iPod for $35 (shipping incl) earlier this
week. It was listed as for parts only since it showed the red sad
face and wouldn't boot. Before buying, I've been researching repairing
iPod classics and found
http://www.ifixit.com/Wiki/iPod_Classic_Troubleshooting and
Sadly this was a rather specialty board, a dual speed, dual output board
for the high-end furnace that my parents were talked into buying when
they replaced their original, but still working 30 year old furnace back
in 2006 or so.
My HVAC guy said there are some aftermarket generic controllers
An HTML attachment was scrubbed...
URL:
http://mail.okiebenz.com/pipermail/mercedes_okiebenz.com/attachments/20120217/a92f7edb/attachment.html
___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http
Jim,
The drive is connected via usb. It has not even started writing to the
disc yet so I don't know if that will limit the speed or not yet.
Mike
On Feb 17, 2012 10:58 AM, Jim Cathey j...@windwireless.net wrote:
I am attempting to make a dvd. I have a Powerbook g4 and an LG ge24
external
Alex,
I think you are right on with what is slowing me down. Not even writing
to the disc yet.
Mike
On Feb 17, 2012 11:27 AM, Alex Chamberlain apchamberl...@gmail.com
wrote:
Our G4 will make a DVD in about an hour IIRC, I think its (internal)
drive can only burn at 1x. This is just a
Gee! In the old 80% efficiency days you had one overtemp sensor (that
turned off the flame) and one hot sensor (that turned on the fan) and a
thermostat (that turned on the solenoid for the flame), plus a couple relays
and a transformer. My, how far we've come. Kinda déjà vu for a new MBZ vs
my
Not familiar with MagicDVD or whatever it is, but it sounds like there is some
compression or transcoding going on that is probably slowing things down. Add
to that an external USB drive and you have a formula for some sluggish
performance.
Dan
On Feb 17, 2012, at 10:24 AM, Michael Canfield
On 17/02/2012 11:18 AM, Allan Streib wrote:
Sadly this was a rather specialty board, a dual speed, dual output board
for the high-end furnace that my parents were talked into buying when
they replaced their original, but still working 30 year old furnace back
in 2006 or so.
My HVAC guy said
On 17/02/2012 12:43 PM, Scott Ritchey wrote:
Gee! In the old 80% efficiency days you had one overtemp sensor (that
turned off the flame) and one hot sensor (that turned on the fan) and a
thermostat (that turned on the solenoid for the flame), plus a couple relays
and a transformer. My, how far
A G4 CPU is really quite capable, but not if the software
was written, sloppily one might say, for a _much_ faster
CPU. See it all the time. Done it myself.
You optimize your SW until it runs 'fast enough' on your
test system. Then ship it. Nothing to do with how fast
it is potentially
Alex Chamberlain wrote:
It's the authoring with attendant compression that makes it slow. Think
ripping MP3s from CDs, only much worse. Michael's observations are about
in line with what I've seen on my G4, unfortunately.
And I thought my old slow PC was bad for taking about 1.2 minutes for
Allan Streib wrote:
That Goodman furnace Mitch linked a week or two ago was not much more
than what the repair cost on this Bryant. Next time I'm going to have
to think about just replacing. It's sad in a way when a major appliance
like a furnace is almost a disposable item.
Speaking of
Last night I retired my 15yo Sony receiver (at least for a little while)
as it does not decode DTS sound, which Blu-ray discs all seem to
contain. Found a newer similar Sony rcvr from a local guy for $75,
seems to work OK except it won't see my AppleTV optical sound output,
which the other
Pilot lights can use a lot of gas but if the furnace is inside heated space
and you shut the pilot off in the summer it's not that big a deal: it's
heat and it's going where you need it.
-Original Message-
From: mercedes-boun...@okiebenz.com [mailto:mercedes-boun...@okiebenz.com]
On
On Feb 16, 2012 9:26 PM, Mitch Haley m...@voyager.net wrote:
http://nwct.craigslist.org/cto/2806261245.html
Aargh, wrong coast!
Not my favorite color, but I do love 124 coupes and the Sportline goodies
would make up for it.
Alex
___
http://www.okiebenz.com
Alex Chamberlain wrote:
On Feb 16, 2012 9:26 PM, Mitch Haley m...@voyager.net wrote:
http://nwct.craigslist.org/cto/2806261245.html
Aargh, wrong coast!
Expedia.com?
That's what I'll do if I decide I want a 4matic out of Rhode Island.
___
So what makes it sport?
BTW, ads are much easier and quicker to understand and less annoying if they
include a bit of appropriate punctuation. :)
Wilton
- Original Message -
From: Alex Chamberlain apchamberl...@gmail.com
To: Mercedes Discussion List mercedes@okiebenz.com
Sent:
But . one of the reasons that our furnace has lasted as long as it
has without rusting is that the pilot light keeps the heat exchanger
warm and dry througout the summer. We also run a dehumidifier in the
basement most of the time in the summer to keep things down there dry. I
don't like
410 pass is closed, you will have to do 12 or 90.
It is a just drive it. Bushings and fluid would be simple. I have three
clusters on the shelf, some other parts I pulled at PnP years ago. Not going
to six million $$$ man the car, but can do some fix.
Chrome is old, the whole car is old,
Don't quote me on this Wilton, but a guy had a new one years ago when I was
in the local Benz club. As I remember, it had different shocks and
springs, rode a bit lower, more aggressive bolstering on the seats, and I
think a different head (24 valve ?). Rims were different too. I didn't
look
wilt...@nc.rr.com wrote:
So what makes it sport?
Sportline was a factory option on 124s and 201s ( at least). Stiffer
suspension, quicker steering ratio, different interior with rear bucket
seats and (I think) bigger bolsters on the front seats.
Alex
___
I would challenge this statement.
My natural gas consumption cost-wise was under $25/month in summer with an 80
gallon (yes, that's 80) water heater that had a pilot.
So that's both the gas for the pilot as well as what it took to heat the water.
Dan
On Feb 17, 2012, at 3:42 PM, Scott Ritchey
Probably normal, thats a REALLY old computer. The big question is what the
input format to iDVD is, if its not already mpeg2 at the same datarate as you
are wanting on DVD its compressing the video and that is whats slowing your
computer.
The G5 was a big deal when it came out because it was
Burn it to the HD as an ISO and then burn to DVD?
On Feb 17, 2012, at 7:24 AM, Michael Canfield wrote:
I am attempting to make a dvd. I have a Powerbook g4 and an LG ge24
external drive as the internal is shot in the mac. I am using Magic iDVD
and it is taking forever. I set it all up
...The drive is connected via usb. It has not even started writing to
the
disc yet so I don't know if that will limit the speed or not yet...
USB or USB2? Makes a huge difference. No Firewire?
RLE
___
http://www.okiebenz.com
For new and used parts go
Get DragonBurn.
Also verfiy that the drive is working correctly, I've had any number
of LG drives spit the bits on me without notice, leading to exactly
your problem.
You should also do a permissions repair -- if file pernissions are
goofed up, all sorts of weird things happen.
Peter
$73k?!! Cough, cough, gag, pant, cough, cough!! 'Think I'd want something
a little sporty for $73k worth of sport. 'Course, I guess I've never been
much of a sport, anyway, but that's OK. I'll just keep driving my plain old
126 and 124 with closed sunroofs - sunroofs that I was forced to
A little MORE sporty, that is.
Wilton
- Original Message -
From: WILTON wilt...@nc.rr.com
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Friday, February 17, 2012 6:34 PM
Subject: Re: [MBZ] who wants a W124 Sportline?
$73k?!! Cough, cough, gag, pant, cough, cough!!
Last I looked, they all should be close to 1 Amp each.
I may be wrong, but a cracked head gasket or other sources of compression
loss dont clear up when engine temp is up.
Glow P's carbon up like anything else in that motor.
Carbon is a conductor.
But as always, I was wrong before.
(I read the
Nice thing about the sportline cars back then, they still followed in that
same spirit of the earlier 6.3, in that they were very subtle, and you kind
of had to know what you were looking for to pick one out. Unlike a lot of
the current AMG models, that go like stick, but have a good amount of
Sad in ways, but tacky and vulgar are now
fashionable.
Ed
300E
you mean vulgar like this? http://www.mbusa.com/amg/build/
or tacky like this?
http://www.benzworld.org/forums/w126-s-se-sec-sel-sd/1504914-w126-donk-3.html
Or vulgar and tacky like these?
Something in this is alleged to be a
Not mine, etc.
Fred Moir
Lynn MA
Diesel preferred
Original Message
Subject:1981 mercedes 300td - $1000 (cape)
Date: Fri, 17 Feb 2012 19:05:16 -0800 (PST)
From: fred.s...@yahoo.com
To: fred.s...@verizon.net
fred.s...@yahoo.com has forwarded you this
I want any of the vulgar ones, particularly those ending in 65
--R
On 2/17/12 9:35 PM, Dieselhead wrote:
Sad in ways, but tacky and vulgar are now
fashionable.
Ed
300E
you mean vulgar like this? http://www.mbusa.com/amg/build/
or tacky like this?
Yeah, both.
Ed
300E
On 17 February 2012 21:35, Dieselhead 126die...@gmail.com wrote:
Sad in ways, but tacky and vulgar are now
fashionable.
Ed
300E
you mean vulgar like this?
http://www.mbusa.com/amg/**build/http://www.mbusa.com/amg/build/
or tacky like this?
Me too, just delete the badges, and that silly carbon fibre that is all the
rage for interior trim. What is it with people thinking clear coated carbon
mate is a cool option for interior trim. If it's such a good look, maybe
they should just stop painting Corvettes and start selling them in plain
If GM did it right, a carbon fibre Vette with a proper polish and uv
protectant clearcoat would likely sell quite well. Witness the naked
stainless steel on the DMC-12.
Walt
On Feb 17, 2012 11:39 PM, E M pokieba...@gmail.com wrote:
Me too, just delete the badges, and that silly carbon fibre
49 matches
Mail list logo