;Robert Massmann" <rmassm...@embarqmail.com>
Sent: Monday, October 17, 2016 10:53:51 AM
Subject: Re: [MBZ] Fw: New Ignition Switch Issue 95 E300D
Max,
I got hung up trying to remove the steering column and had to grind
the steering lock retaining pin. Normally this pin can be pushed in if
17, 2016 11:14 AM
Subject: Re: [MBZ] Fw: New Ignition Switch Issue 95 E300D
Below is what I got back from the online order department. I can get key and
tumbler, but it will not match :(.
The tumbler that would fit your car is a TRP item which can only be purchased
and installed through your loc
> On October 17, 2016 at 11:14 AM Meade Dillon via Mercedes
> wrote:
>
>
> Bob,
>
> If you ordered from the MB dealer and provided the VIN and proof of
> ownership, the new tumbler should have the same pattern as the original
> tumbler, so if your original (now dead)
--
> From: "Robert Massmann via Mercedes" <mercedes@okiebenz.com>
> To: "Mercedes Discussion List" <mercedes@okiebenz.com>
> Cc: "Robert Massmann" <rmassm...@embarqmail.com>
> Sent: Monday, October 17, 2016 10:53:51 AM
> Subject: Re: [MBZ]
Monday, October 17, 2016 11:10:09 AM
Subject: Re: [MBZ] Fw: New Ignition Switch Issue 95 E300D
I have a new tumbler and key on order, but I am not sure it will match my
current car. May have to have it re-keyed to get things to match doors and
trunk?
Bob Massmann
1995 E300D 448,000 miles
- O
@okiebenz.com>
To: "Mercedes Discussion List" <mercedes@okiebenz.com>
Cc: "Robert Massmann" <rmassm...@embarqmail.com>
Sent: Monday, October 17, 2016 10:53:51 AM
Subject: Re: [MBZ] Fw: New Ignition Switch Issue 95 E300D
Max,
I got hung up trying to remove the steering colu
ent: Monday, October 17, 2016 9:36:14 AM
Subject: Re: [MBZ] Fw: New Ignition Switch Issue 95 E300D
Bob, explain this again? How did you get up to the point that you could
use the abrasive cut-off wheel? I think you said that you removed the
entire steering column?
I'm going to have a similar fi
key.
Regards,
Bob Massmann
1995 E300D 448,000 miles
-Original Message- From: Curley McLain via Mercedes
Sent: Saturday, October 15, 2016 9:51 PM
To: Mercedes Discussion List
Cc: Curley McLain
Subject: Re: [MBZ] Fw: New Ignition Switch Issue 95 E300D
Waytago! Too bad you didn't get it out be
e new ones come in, but after install,
>> it would not turn to the off position to release the key.
>>
>> Regards,
>>
>> Bob Massmann
>> 1995 E300D 448,000 miles
>>
>> -Original Message- From: Curley McLain via Mercedes
>> Sent: Sat
Bob, explain this again? How did you get up to the point that you could
use the abrasive cut-off wheel? I think you said that you removed the
entire steering column?
I'm going to have a similar fight with the "95 124 Cabriolet, keys are
missing and the ignition tumbler / lock assembly looks
McLain via Mercedes
Sent: Saturday, October 15, 2016 9:51 PM
To: Mercedes Discussion List
Cc: Curley McLain
Subject: Re: [MBZ] Fw: New Ignition Switch Issue 95 E300D
Waytago! Too bad you didn't get it out before you had to hose the ign
lockset.
I found out you can't drill out the lock
Waytago! Too bad you didn't get it out before you had to hose the ign
lockset.
I found out you can't drill out the lock or the protective sleeve. I
took the front plate from a 123 to th a guy who was selling carbide
drill bits that were 'indestructible" and would "drill through
anything."
From: rmassm...@embarqmail.com
Sent: Saturday, October 15, 2016 3:18 PM
To: curtlud...@yahoo.com
Subject: Re: [MBZ] New Ignition Switch Issue 95 E300D
Just to let you know I finally got the tumbler out, but accomplished it by
cutting the protective sleeve. I have gotten the tumbler to rotate
13 matches
Mail list logo