Re: [MBZ] Anyone Ever Heard of This?

There is a slight downslope toward the pump so the ball should be safe. At least it wasn't any problem for me. Curley McLain via Mercedes wrote: MG via Mercedes March 20, 2017 at 5:36 PM If you can I would go ahead and stretch the spring first just to see if

Re: [MBZ] Anyone Ever Heard of This?

I’ll give it a shot this weekend when I have a few minutes. Thanks! -D > On Mar 20, 2017, at 6:36 PM, MG via Mercedes wrote: > > If you can I would go ahead and stretch the spring first just to see if it > helps. It takes 10 min. to take the spring cover bolt loose

Re: [MBZ] Anyone Ever Heard of This?

MG via Mercedes March 20, 2017 at 5:36 PM If you can I would go ahead and stretch the spring first just to see if it helps. It takes 10 min. to take the spring cover bolt loose from the top of the banjo bolt on the engine side of the pump. Hold the banjo bolt

Re: [MBZ] Anyone Ever Heard of This?

If you can I would go ahead and stretch the spring first just to see if it helps. It takes 10 min. to take the spring cover bolt loose from the top of the banjo bolt on the engine side of the pump. Hold the banjo bolt with a 17mm wrench and use a 14mm to loosen the plug, you don't have to take

Re: [MBZ] Anyone Ever Heard of This?

I did. -D > On Mar 20, 2017, at 5:06 PM, Kaleb C. Striplin via Mercedes > wrote: > > Did you adjust the new rack bolt per the procedure? If you did and it still > rocks you have other problems. > > Sent from my iPhone > ___

Re: [MBZ] Anyone Ever Heard of This?

Did you adjust the new rack bolt per the procedure? If you did and it still rocks you have other problems. Sent from my iPhone > On Mar 20, 2017, at 2:49 PM, Dan Penoff via Mercedes > wrote: > > Yes. It idles and runs great, but the engine sways or shakes at idle. New

Re: [MBZ] Anyone Ever Heard of This?

Yes. It idles and runs great, but the engine sways or shakes at idle. New motor mounts, too. I don't drive it enough to tell for sure, but it may be temperature dependent. -D > On Mar 20, 2017, at 3:44 PM, Kaleb C. Striplin via Mercedes > wrote: > > Idle speed

Re: [MBZ] Anyone Ever Heard of This?

Idle speed adjusted correctly? Sent from my iPhone > On Mar 20, 2017, at 2:38 PM, Dan Penoff via Mercedes > wrote: > > Yes. Had it since I first got it. > > -D > >> On Mar 20, 2017, at 3:36 PM, Kaleb C. Striplin via Mercedes >> wrote: >> >>

Re: [MBZ] Anyone Ever Heard of This?

Yes. Had it since I first got it. -D > On Mar 20, 2017, at 3:36 PM, Kaleb C. Striplin via Mercedes > wrote: > > Does it have the updated rack damper bolt? > > Sent from my iPhone > >> On Mar 20, 2017, at 2:32 PM, Dan Penoff via Mercedes >>

Re: [MBZ] Anyone Ever Heard of This?

Yes, I might try that first to see if there's any effect. -D > On Mar 20, 2017, at 3:35 PM, Craig via Mercedes wrote: > > On Mon, 20 Mar 2017 15:32:03 -0400 Dan Penoff via Mercedes > wrote: > >> Thanks for researching this, Manfred! >> >> The

Re: [MBZ] Anyone Ever Heard of This?

Does it have the updated rack damper bolt? Sent from my iPhone > On Mar 20, 2017, at 2:32 PM, Dan Penoff via Mercedes > wrote: > Thanks for researching this, Manfred! > > The bolt with spring is a whopping $27 list from Mercedes, so I may order one > for my 300D, which

Re: [MBZ] Anyone Ever Heard of This?

On Mon, 20 Mar 2017 15:32:03 -0400 Dan Penoff via Mercedes wrote: > Thanks for researching this, Manfred! > > The bolt with spring is a whopping $27 list from Mercedes, so I may > order one for my 300D, which has a really rough idle. That is, it > shakes at idle big time,

Re: [MBZ] Anyone Ever Heard of This?

Thanks for researching this, Manfred! The bolt with spring is a whopping $27 list from Mercedes, so I may order one for my 300D, which has a really rough idle. That is, it shakes at idle big time, but everything is in order from what I can tell. Dan > On Mar 20, 2017, at 3:58 PM, MG via

Re: [MBZ] Anyone Ever Heard of This?

I read the whole list of messages on this and came to the conclusion that the guy is just trying to make some money. If you read the manual it says that if the spring in there is too weak to keep the pressure above .8 bar then adjust it to 27mm. In other words stretch the spring and put it

Re: [MBZ] Anyone Ever Heard of This?

Which hollow bolt is it? I was looking at the EPC for my 350SDL and didn’t see anything like it, just a bunch of hollow bolts. Maybe the OM603 doesn’t use one? On my 300D I found a hollow bolt that it on the end of the return line where it enters the IP - that’s referred to in the EPC as a

Re: [MBZ] Anyone Ever Heard of This?

I had one go bad on a OM621. I have known about them for forty-some years. clay via Mercedes March 19, 2017 at 9:32 PM I just did yesterday. Club event at local shop, we got to put cars in the air. Fellow who has a red 220D that he keeps immaculate, showed up

Re: [MBZ] Anyone Ever Heard of This?

I just did yesterday. Club event at local shop, we got to put cars in the air. Fellow who has a red 220D that he keeps immaculate, showed up late. We have been pals since I got Gump. He has all manner of manuals and deep research. ANYWAY, he learned of this item and was thinking he needed

Re: [MBZ] Anyone Ever Heard of This?

An old tired spring may allow a lower pressure on the feed passages, so this may be a necessary repair. If your 0 to 60 time is within factory spec, you don't need this. -- Max Dillon Charleston SC '87 300TD '95 E300 On March 18, 2017 1:41:44 PM EDT, Dan Penoff via Mercedes

Re: [MBZ] Anyone Ever Heard of This?

On Sat, 18 Mar 2017 13:41:44 -0400 Dan Penoff via Mercedes wrote: > http://www.peachparts.com/shopforum/diesel-performance-tuning/361825-performance-overflow-valve.html > > Anyone Ever Heard of This? No. But it makes sense that increasing the pressure inside the

Re: [MBZ] Anyone Ever Heard of This?

Yes I bought one of those springs from him when he rebuilt injectors. I think it just keeps the supply pressure to the delivery valves higher, or something like that. I never put it in. Pretty much voodoo, but cheap voodoo. On Mar 18, 2017 10:42 AM, "Dan Penoff via Mercedes"