The guy at the parts counter is probably looking up the VMI on his computer by
searching the radio serial number field, I presume. Never asked if it’s
searchable by the different fields in the document - I’ll ask next time I’m
over there. It may also be searchable by the build sheet in the EPC,
I must have a good dealer then. I copy the serial number for the radio (or
maybe show the radio) and the guy at the parts counter gives me the code. I
must look honest.
On Thu, Jun 17, 2021, 3:53 PM Dan Penoff via Mercedes
wrote:
> Uh, yes it does. The code is in the VMI which is referenced by
Uh, yes it does. The code is in the VMI which is referenced by the VIN. You
give the dealer the VIN, they look up the VMI, which has the factory supplied
radio code in it.
That goes back well into the 1980s.
I’ve pasted a screen shot below of the VMI for my former 1990 350SDL’s VMI with
the
The radio code up to 199x has nothing to do with the VIN.
On Thu, Jun 17, 2021 at 9:38 AM Mitch Haley via Mercedes <
mercedes@okiebenz.com> wrote:
> On 2021-06-16 19:18, Dan Penoff via Mercedes wrote:
> > They need the VIN of the vehicle it was shipped in.
>
> These days, just about everything
On 2021-06-16 19:18, Dan Penoff via Mercedes wrote:
They need the VIN of the vehicle it was shipped in.
These days, just about everything you buy from a knackers (not a u-pull)
has the VIN on the invoice. (and if you 'rebuild' a salvage car, you
better have invoices for every part you used,
Drive to any dealer and they will help.
On Wed, Jun 16, 2021 at 7:48 PM Buggered Benzmail via Mercedes <
mercedes@okiebenz.com> wrote:
> Ah. Didn’t think of that
>
> --FT
> Sent from iPhone
>
> > On Jun 16, 2021, at 7:19 PM, Dan Penoff via Mercedes <
> mercedes@okiebenz.com> wrote:
> >
>
>
Ah. Didn’t think of that
--FT
Sent from iPhone
> On Jun 16, 2021, at 7:19 PM, Dan Penoff via Mercedes
> wrote:
>
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
They need the VIN of the vehicle it was shipped in.
-D
> On Jun 16, 2021, at 7:17 PM, Floyd Thursby via Mercedes
> wrote:
>
> Or you can call MBUSA and they will give it to you
>
> --FT
>
> On 6/16/21 6:57 PM, Dan Penoff via Mercedes wrote:
>> Rick,
>>
>> Email me the serial number and
Or you can call MBUSA and they will give it to you
--FT
On 6/16/21 6:57 PM, Dan Penoff via Mercedes wrote:
Rick,
Email me the serial number and I’ll get you the code.
-D
On Jun 16, 2021, at 6:55 PM, Rick Hawkins Java Letterpress Cycles Photon via Mercedes
wrote:
Folks
I am still alive
Rick,
Email me the serial number and I’ll get you the code.
-D
> On Jun 16, 2021, at 6:55 PM, Rick Hawkins Java Letterpress Cycles Photon via
> Mercedes wrote:
>
> Folks
>
> I am still alive on Tybee Island
>
> I bought a $25 sprinter radio ... Becker with of course no code
>
> I am
OK thanks Andrew. My nephew is only 19 he might not know what a cassette
is. Yes the cassette in my 82 300CD doesn't work either.
Dwight E. Giles Jr.
7 Johnson Ave
North Kingstown RI 02852
On Sun, May 31, 2020 at 3:10 PM Andrew Strasfogel
wrote:
> Dwight, I have one of these that works but for
Dwight, I have one of these that works but for the cassette deck. Yours
for the cost of mailing.
On Sun, May 31, 2020 at 8:57 AM Dwight Giles via Mercedes <
mercedes@okiebenz.com> wrote:
> I can take it, I lived in the City. We had a poster that said, "Keep New
> York clean. Dump your trash in
I can take it, I lived in the City. We had a poster that said, "Keep New
York clean. Dump your trash in New Jersey." Sorry Jaime
Dwight Giles Jr.
Wickford RI
On Sun, May 31, 2020, 6:48 AM Dan Penoff via Mercedes
wrote:
> Yeah, if you mention Jaime you get additional verbal abuse.
>
> (These
Geat thanks,. I will ask for the friends of Jaime discount. My nephew just
got an 89 560SL so it needs a Becker to repmace the Pioneer in it now.
Dwight Giles Jr.
Wickford RI
On Sun, May 31, 2020, 6:24 AM Jaime Kopchinski via Mercedes <
mercedes@okiebenz.com> wrote:
> Mention you’re a friend of
Thanks Rick. Will contact them tomorrow.
Dwight Giles Jr.
Wickford RI
On Sun, May 31, 2020, 12:48 AM Rick Knoble via Mercedes <
mercedes@okiebenz.com> wrote:
> https://www.beckerautosound.com/
>
> Rick
>
>
> ___
> http://www.okiebenz.com
>
> To search list
Exactly :)
On Sun, May 31, 2020 at 6:48 AM Dan Penoff via Mercedes <
mercedes@okiebenz.com> wrote:
> Yeah, if you mention Jaime you get additional verbal abuse.
>
> (These guys are from northern NJ, so they’re pretty gruff to everyone.
> Don’t take it personally, it’s not meant to be.)
>
> -D
>
Yeah, if you mention Jaime you get additional verbal abuse.
(These guys are from northern NJ, so they’re pretty gruff to everyone. Don’t
take it personally, it’s not meant to be.)
-D
> On May 31, 2020, at 6:23 AM, Jaime Kopchinski via Mercedes
> wrote:
>
> Mention you’re a friend of mine!
Mention you’re a friend of mine! I worked with those guys for years.
On Sat, May 30, 2020 at 11:21 PM Dwight Giles via Mercedes <
mercedes@okiebenz.com> wrote:
> I want to get a Becker GP radio for my nephew's,89 560SL as,a,graduation
> present. Is,that Becker place in NJ best source or ???
>
https://www.beckerautosound.com/
Rick
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Thanks Clay. I will pursue.
Dwight Giles Jr.
Wickford RI
On Sat, May 30, 2020, 11:25 PM Clay via Mercedes
wrote:
> Yes, Becker Audio is a great supplier. They have a presence in the Bay
> of Fleas. Retail pricing, but it will be as new and could even be enhanced
> with USB/Bluetooth. I had
Yes, Becker Audio is a great supplier. They have a presence in the Bay of
Fleas. Retail pricing, but it will be as new and could even be enhanced with
USB/Bluetooth. I had a pair of radios they did rebuilds on. Look and work as
new. One is living in the 450SL.
clay
I have no pronouns
Is there anyone on the list who has experienced the problem I'm having
with the Becker Grand Prix radio and Hirschmann antenna in my '84 300D
. . .
This has the circuit board and the belt? Or just the cam
and switches? The belt-driven one has electronics, and if
they go south it could cause
Andrew,
Send them to Ed Ebel at Becker North America for an overhaul. This is
from the MBCA forum:
---
Welcome to the All About Radios forum. This forum was created to allow
the experts from Becker AutoSound to help you solve any radio-related
?? I am looking for a 10 cent repair, not one that costs $295.
On Mon, Nov 16, 2009 at 8:36 AM, Dillon, Meade M CIV SPAWARSYSCEN-ATLANTIC,
53310 meade.m.dil...@navy.mil wrote:
Andrew,
Send them to Ed Ebel at Becker North America for an overhaul. This is
from the MBCA forum:
How do I pop off the face plate?
On Mon, Nov 16, 2009 at 2:02 AM, Jim Cathey j...@windwireless.net wrote:
I have a Becker AM-FM cassette like the one below. Two (?) bulbs are out
so
the middle presets and cassette door are in the dark. Not sure how to pop
off the face plate, or if i did,
I am looking for a 10 cent repair, not one that costs $295.
Isn't one, quite, unless you've got a better source for
little light bulbs than I've ever seen!
How do I pop off the face plate?
I don't know, I've never done it on that vintage. Grab screwdriver,
cojones, and go at it! It might
I have a Becker AM-FM cassette like the one below. Two (?) bulbs are
out so
the middle presets and cassette door are in the dark. Not sure how to
pop
off the face plate, or if i did, what i would find. Ideas on how to
fix?
Disassemble sufficiently to gain access to the 12V grain-of-wheat
Update on the SONY CD player and the IPOD
My wife took me to the mall last night and purchased a 30GB IPOD for me for
my birthday. Downloaded a cd and a bunch of Audible.com audiobooks to it
this afternoon, cobbled together a double male cable to plug into the aux
input on the cd player and
You can get a little FM transmitter too for the pod that will work sorta
OK on any radio that doesn't have an input. $30 at El Mercado de Wal.
You can buy the male-male cable too for a dollar or two.
I bought a 16MB player yesterday for $6 at the surplus electronics shop,
I am going to hack
On 9/19/06, redghost [EMAIL PROTECTED] wrote:
Two ways to skin that cat Angelo. First would be to invest in an FM
adapter so the iPod sends its music out through the radio. Might not
work well in overly populated areas with excess radio stations. There
are six or so slots that it transmits,
Rich said
Sony has one of those jukebox things, holds a couple hundred discs I
think, but you really ought to just burn them to a hard drive or iPod or
something, and use that with those new streaming transmitter/receiver
things that can send/recieve it here and there over a wired or wireless
In that case buy a cheap 5 tray CD changer and plug it in. I doubt if
she could really tell the difference among various-priced options,
unless you have some awesome speakers and amps. The Sony thing that
holds a couple hundred I think is like $300, not a bad price if you want
all of them
which folks did you talk to at Becker? and what kind of adapter did you
use? I'm wanting to do a similar thing with my 92 300D.
On 9/19/06, redghost [EMAIL PROTECTED] wrote:
Two ways to skin that cat Angelo. First would be to invest in an FM
adapter so the iPod sends its music out through
What they do is provide an aux jack on the back that is wired into
the input from the cassette player.
As mentioned you could get a fm adaptor, but I'll point out some
other choices
a) Some xm radio receivers have transmitters and provide aux-in so
you can get xm radio and ipod input then
On 9/19/06, ANGELO GIAIMO [EMAIL PROTECTED] wrote:
Talked to the folks at Becker.they say that radio was not designed to
be used with cassette adapters. I should send them the radio (with $100, I
think) and they would install a separate interface so I could plug the IPOD
in directly.
ooh ooh ooh - where can i find instructions or who can i call to set my
radio to US tuning?
On 9/19/06, John M McIntosh [EMAIL PROTECTED] wrote:
You can check I've seen instructions for some becker radios to switch
them from europe frequency scanning to North America scanning.
Having a Euro
http://pages.prodigy.net/jforgione/MB_Bekr.html
If you are lucky...
On 19-Sep-06, at 6:08 PM, Sunil Hari wrote:
ooh ooh ooh - where can i find instructions or who can i call to
set my radio to US tuning?
On 9/19/06, John M McIntosh [EMAIL PROTECTED]
wrote:You can check I've seen
Speaking of audio, does anyone know a really good brand of CD changer for
in-home use? Is Nakamichi the ultimate brand? Sony?
On 9/19/06, John M McIntosh [EMAIL PROTECTED] wrote:
http://pages.prodigy.net/jforgione/MB_Bekr.html
If you are lucky...
On 19-Sep-06, at 6:08 PM, Sunil Hari
But what a chore to copy (burn?) all those CDs into the jukebox... I think
she would prefer a CD changer that can load 5-7 CDs. (this is a birthday
present)
On 9/20/06, Rich Thomas [EMAIL PROTECTED] wrote:
Sony has one of those jukebox things, holds a couple hundred discs I
think, but you
Well I've a Denon DVD 1920, but it won't work with some mp3s, and
some DVDs. however the cheap sony DVD/CD/VCR player reads anything
the Denon
won't. Denon does give a better image on the lcd tv tho.
On 20-Sep-06, at 12:36 PM, andrew strasfogel wrote:
Speaking of audio, does anyone know a
Ahmen well like the teenagers around here, buy an ipod and pass it
around and you get back oh 5000 hours of music or something, as
players gain
more storage space and migrate to movies via internet I'm sure the
*sharing* model used by the teenager will encompass video too.
On 20-Sep-06, at
Two ways to skin that cat Angelo. First would be to invest in an FM
adapter so the iPod sends its music out through the radio. Might not
work well in overly populated areas with excess radio stations. There
are six or so slots that it transmits, but could all be used in NY
area.
Other way
Hi Tom,
Maybe these will help --
http://www.beckerelectronics.com/beckermanual.html - has manual downloads
for $15. (!!)Seems high.
http://members4.boardhost.com/beckerboard/ - Forum for Becker Electronics -
someone may have a OM.
http://www.mercedesradiorepair.com/ - repairs MB radios - may
Any one have paperwork and schematic for a Becker 560 (I believe) model
radio, AM/FM cassette they can part with or sell. The black looking unit.
Regards Tom Scordato
Bellefonte PA
- Original Message -
From: Mitch Haley [EMAIL PROTECTED]
To: Mercedes mailing list [EMAIL PROTECTED]
: [EMAIL PROTECTED]
Subject: Re: [MBZ] Becker Radio
Date: Fri, 17 Jun 2005 16:45:27 -0500
MIME-Version: 1.0
Content-Type: text/plain; format=flowed; charset=iso-8859-1;
reply-type=original
Content-Transfer-Encoding: 7bit
X-Priority: 3
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook Express
Dont have any beckers laying around. Well I do but no good ones.
frederick w moir wrote:
Hi, Kaleb. As per you ad-line about the best used MB parts anywhere, I
need a Becker radio suitable for an 85 300TD. The one that I have
flattens the battery, and only plays a subdued crackle and hiss.
Mea culpa, I already apologized to Kaleb, if you want an apology, ask
nicely and I'll have one engraved and hand delivered to you.
NOT!
Fred Moir
Lynn MA
If it were not for the mistakes that I make, I'd have nothing to think about.
At 08:25 PM 6/13/2005, you wrote:
Is this going to be a
Can you do engraving on a climate control servo? That would be good.
The comment was directed to King Okie Parts, dude, not you. Kleb and me go
way back. I knew him when he was only the Prince of Okie Parts.
Anyway, the suggestion that Mercedes should cover failures on 13-yr-old
radiators was
Hell, you knew me way back when i was just a dumb okie.
Steve MacSween wrote:
Can you do engraving on a climate control servo? That would be good.
The comment was directed to King Okie Parts, dude, not you. Kleb and me go
way back. I knew him when he was only the Prince of Okie Parts.
49 matches
Mail list logo