Bravo! -- Max Dillon Charleston SC '87 300TD '95 E300 On August 6, 2017 6:52:21 PM EDT, "Kaleb C. Striplin via Mercedes" <mercedes@okiebenz.com> wrote: >So the axle I had on hand was too short so it did not come out of a >124, I think it was a 126 axle. So after remembering the tricks to the >job I was able to pull an axle out of the rusty e300 in about 10 >minutes. Got it installed in the car. Next up was installing the rear >exhaust I pulled out of the other car. For some reason it is hanging >slightly too high. Just enough to cause annoying rattles and it is >contacting the diff end of the axle and the bolt heads are hitting it >causing a hell of a noise. I jacked around with it prying it around to >no avail. I had enough and gave up for the day. Tomorrow I will >probably drop the exhaust down again and see if bending the rear and >middle mounting hooks up slightly will drop the exhaust down. It only >needs to be down probably a quarter of an inch. > >Sent from my iPhone > >_______________________________________ >http://www.okiebenz.com > >To search list archives http://www.okiebenz.com/archive/ > >To Unsubscribe or change delivery options go to: >http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com _______________________________________ http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com