Re: [MBZ] Viton tubing for injector return lines?

2015-08-30 Thread Curt Raymond via Mercedes
Glad you found it, its hard to search from the tablet. That stuff is great... Curt Sent from Yahoo Mail on Android From:fmiser via Mercedes mercedes@okiebenz.com Date:Sat, Aug 29, 2015 at 9:55 PM Subject:Re: [MBZ] Viton tubing for injector return lines? Craig wrote: In March, I

Re: [MBZ] Viton tubing for injector return lines?

2015-08-30 Thread Dan Penoff via Mercedes
$18 on Amazon. Nice cast and machined one, not the low end stamped steel version. Never seen them at FLAPS, dealer sells them, though. Never had to buy one. Dan On Aug 29, 2015, at 10:25 PM, Curly McLain via Mercedes mercedes@okiebenz.com wrote: POS! I'll take it off your hands if ya

Re: [MBZ] Viton tubing for injector return lines?

2015-08-29 Thread Kaleb C. Striplin via Mercedes
Just get the right stuff from autohaus az or any of the other online places. Sent from my iPhone On Aug 29, 2015, at 4:45 PM, Craig via Mercedes mercedes@okiebenz.com wrote: In March, I replaced the leaking injector return lines on our '82 240D/3.0 with some tubing from our local hardware

Re: [MBZ] Viton tubing for injector return lines?

2015-08-29 Thread fmiser via Mercedes
Craig wrote: In March, I replaced the leaking injector return lines on our '82 240D/3.0 with some tubing from our local hardware store. Since that wasn't viton and should be replaced before it fails, I'm wondering where others have gotten the viton tubing. If you have bought some,

Re: [MBZ] Viton tubing for injector return lines?

2015-08-29 Thread Curly McLain via Mercedes
Speaking of fuel lines, I changed the fuel filter on my W220 today. That in and of itself wasn't a big deal, but it was the first time I had worked with the Clik-r style hose clamps. http://kgs-ind.com/products/other/clic-r/ They're all over the car, and in anticipation of working with them,

Re: [MBZ] Viton tubing for injector return lines?

2015-08-29 Thread Dan Penoff via Mercedes
Speaking of fuel lines, I changed the fuel filter on my W220 today. That in and of itself wasn’t a big deal, but it was the first time I had worked with the “Clik-r” style hose clamps. http://kgs-ind.com/products/other/clic-r/ They’re all over the car, and in anticipation of working with them,

Re: [MBZ] Viton tubing for injector return lines?

2015-08-29 Thread Curly McLain via Mercedes
Craig wrote: In March, I replaced the leaking injector return lines on our '82 240D/3.0 with some tubing from our local hardware store. Since that wasn't viton and should be replaced before it fails, I'm wondering where others have gotten the viton tubing. If you have bought some,

Re: [MBZ] Viton tubing for injector return lines?

2015-08-29 Thread Rick Knoble via Mercedes
‎Here's ten feet for fifty bucks.  Black Viton Soft Tubing, 1/8 ID, 1/4 OD, 1/16 Wall, 10' Length https://www.amazon.com/dp/B000FN1H7M/ref=cm_sw_r_awd_D-O4vb2MVTB8B Here's a foot for five bucks.  http://www.ebay.com/itm/281070780224?redirect=mobile ‎ Here's a meter for eleven bucks. 

Re: [MBZ] Viton tubing for injector return lines?

2015-08-29 Thread Craig via Mercedes
On Sat, 29 Aug 2015 16:48:52 -0500 Kaleb C. Striplin via Mercedes mercedes@okiebenz.com wrote: Just get the right stuff from autohaus az or any of the other online places. I could, but then I would have to do it all over again in a few years. Craig ___

Re: [MBZ] Viton tubing for injector return lines

2009-02-21 Thread dave walton
The cloth type self-destruct on removal. According to Mercedes, you should NEVER reuse them. -Dave Walton On Fri, Feb 20, 2009 at 6:42 PM, harry watkins harry...@bellsouth.net wrote: I must have routed that line to the outside of the throttle without leaving enough room. I actually gave the

Re: [MBZ] Viton tubing for injector return lines

2009-02-20 Thread Mitch Haley
harry watkins wrote: HIGH-TEMPERATURE VITON RUBBER TUBING, FIRM, 1/8 ID, 1/4 OD, 1/16 WALL, BLACK The stuff that Rusty sells is listed as 3.2x1.9mm, or 1/8 ID x a bit more than 1/16 wall. You got the right size, but it's possible the barbs cut up the inside of the hose when you pulled it

Re: [MBZ] Viton tubing for injector return lines

2009-02-20 Thread harry watkins
I must have routed that line to the outside of the throttle without leaving enough room. I actually gave the car away after I got new fluids, battery, wipers and filters installed, so I can't go look. Again, this was only one time event, but I don't recall that occurring with the cloth type