Meade Dillon via Mercedes wrote:
I've seen members on Peach Parts advertise them. I made my own from a
piece of steel, you only need two holes for the studs. Don't use aluminum
can material, too weak and may break up and get sucked into the engine.
Everybody should have some 1/8 thick galvanized steel strap in 1 and 1-1/4
widths in their shop. You can cut it quickly with bolt cutters and it has 1000
uses. In this case, you select the width, drill the mounting holes, cut it to
length (it's a lot easier to drill a 3' piece of steel than a 2 piece, so I
always drill first and cut last), and make a gasket for it.
Mitch.
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
All posts are the result of individual contributors and as such, those
individuals are responsible for the content of the post. The list owner has no
control over the content of the messages of each contributor.
