On Tue, Aug 8, 2017 at 5:48 PM, Dieter Nützel <die...@nuetzel-hh.de> wrote: > Hello Alex, > > which is the 'right' way to switch to (from amd-staging-4.11)? > 4.13-rx UP (like Phoronix 'found';-)) show nice improvements.
amd-staging-4.12 is our current internal development branch. amd-staging-drm-next, is just the amd-staging-4.12 branch rebased on drm-next. We are in the process of moving our internal development to track drm-next. Both branches should work equally well for the most part. Alex > > Sadly I'm hit by the BAD 'e1000e' nic regression. > NetworkManager switch it on and off over and over again, since 4.11 UP. --- > Daniel/Intel??? > > > 06:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network > Connection > Subsystem: Fujitsu Technology Solutions Device 1192 > Flags: bus master, fast devsel, latency 0, IRQ 18 > Memory at b0320000 (32-bit, non-prefetchable) [size=128K] > I/O ports at 4000 [size=32] > Memory at b0300000 (32-bit, non-prefetchable) [size=16K] > Capabilities: [c8] Power Management version 2 > Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+ > Capabilities: [e0] Express Endpoint, MSI 00 > Capabilities: [a0] MSI-X: Enable+ Count=5 Masked- > Capabilities: [100] Advanced Error Reporting > Capabilities: [140] Device Serial Number 00-19-99-ff-ff-77-b8-0c > Kernel driver in use: e1000e > Kernel modules: e1000e > > > [ 5.230215] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k > [ 5.230216] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. > [ 5.230474] e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set > to dynamic conservative mode > [ 5.290455] e1000e 0000:06:00.0 0000:06:00.0 (uninitialized): registered > PHC clock > [ 5.346925] e1000e 0000:06:00.0 eth0: (PCI Express:2.5GT/s:Width x1) > 00:19:99:77:b8:0c > [ 5.346927] e1000e 0000:06:00.0 eth0: Intel(R) PRO/1000 Network > Connection > [ 5.347384] e1000e 0000:06:00.0 eth0: MAC: 3, PHY: 8, PBA No: 313132-030 > [ 10.820260] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow > Control: None > [ 10.829857] e1000e 0000:06:00.0 eth0: changing MTU from 1500 to 7152 > [ 15.006499] e1000e 0000:06:00.0 eth0: changing MTU from 7152 to 1500 > [ 19.812377] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow > Control: None > [ 19.820006] e1000e 0000:06:00.0 eth0: changing MTU from 1500 to 7152 > [ 24.007317] e1000e 0000:06:00.0 eth0: changing MTU from 7152 to 1500 > > [to be continued] > > Thanks, > Dieter _______________________________________________ mesa-dev mailing list mesa-dev@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/mesa-dev