On Sun, 14 Apr 2019, Manjukumar Harthikote Matha wrote:
> Hi Rob,
>
> Try from pre-built images from here:
> https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/57639129/Zynq+2018.3+Release
still nothing ... i've formatted a 16G SD card with one large FAT32
partition, made it bootable,
On Sun, 14 Apr 2019, Manjukumar Harthikote Matha wrote:
> Hi Rob,
>
> Try from pre-built images from here:
> https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/57639129/Zynq+2018.3+Release
ok, i'll give that a shot. it appears that all the necessary
instructions are there for how to format
i was just gifted with an avnet zedboard with no SD card and, before
i launch into trying to build my own boot images with YP, i'd like to
copy some minimal pre-built files to an SD card and just make sure the
board works. i've been trying that for the last couple hours and have
had absolutely
Sorry, attached file didn't work, I'll try this:
/dts-v1/;
/ {
#address-cells = <0x1>;
#size-cells = <0x1>;
compatible = "avnet,microzed", "xlnx,zynq-7000";
model = "Test Device";
chosen {
bootargs = "earlyprintk";