From: Jaewon Lee <jaewon....@xilinx.com> Add initial support for the zc1254 evaluation board which has the following main features:
* RFSoC XCZU28DR-FFVE1156 * Samtec BullsEye cable access to: * 8 high speed analog-to-digital converters (HSADC) * 8 high speed digital-to-analog converters (HSDAC) * 8 GTY transceivers * 4 GTR transceivers This patch adds machine configuration file for ZC1254 Evaluation Kit with required setting of board specific yocto variables needed for compilation of bootloader, kernel and device-tree. - linux-xlnx is the kernel provider - u-boot-xlnx is the u-boot provider which will also generate SPL boot.bin While using SPL flow, you may need to provide additional hack to pass the PMU config object. This is similar to all ZU+ boards, due to gap in SPL flow unable to load PMU config object. Signed-off-by: Jaewon Lee <jaewon....@xilinx.com> Signed-off-by: Manjukumar Matha <manjukumar.harthikote-ma...@xilinx.com> --- meta-xilinx-bsp/conf/machine/zc1254-zynqmp.conf | 38 +++++++++++++++++++++++++ 1 file changed, 38 insertions(+) create mode 100644 meta-xilinx-bsp/conf/machine/zc1254-zynqmp.conf diff --git a/meta-xilinx-bsp/conf/machine/zc1254-zynqmp.conf b/meta-xilinx-bsp/conf/machine/zc1254-zynqmp.conf new file mode 100644 index 0000000..51dd2a9 --- /dev/null +++ b/meta-xilinx-bsp/conf/machine/zc1254-zynqmp.conf @@ -0,0 +1,38 @@ +#@TYPE: Machine +#@NAME: zc1254-zynqmp +#@DESCRIPTION: Machine support for ZC1254 Evaluation Board. +# + +SOC_VARIANT ?= "dr" + +require conf/machine/include/tune-zynqmp.inc +require conf/machine/include/machine-xilinx-overrides.inc +require conf/machine/include/machine-xilinx-default.inc + +MACHINE_FEATURES = "rtc ext2 ext3 vfat usbhost" + +UBOOT_MACHINE = "xilinx_zynqmp_zc1254_revA_defconfig" +SPL_BINARY ?= "spl/boot.bin" + +SERIAL_CONSOLE ?= "115200 ttyPS0" + +SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" + +KERNEL_DEVICETREE = "xilinx/zynqmp-zc1254-revA.dtb" + +PREFERRED_PROVIDER_virtual/kernel ?= "linux-xlnx" +PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot-xlnx" + +PMU_FIRMWARE_IMAGE_NAME ?= "pmu-firmware-zynqmp-pmu" +PMU_FIRMWARE_DEPLOY_DIR ?= "${TOPDIR}/pmutmp/deploy/images/zynqmp-pmu" + +EXTRA_IMAGEDEPENDS += " \ + u-boot-zynq-uenv \ + arm-trusted-firmware \ + virtual/boot-bin \ + virtual/bootloader \ + " +IMAGE_BOOT_FILES += " \ + uEnv.txt \ + atf-uboot.ub \ + " -- 2.7.4 -- _______________________________________________ meta-xilinx mailing list meta-xilinx@yoctoproject.org https://lists.yoctoproject.org/listinfo/meta-xilinx