Hello,
I am having an issue that I'm not sure which device is causing.
I have a Trango Apex Lynx that plugs in to a Mikrotik CRS. I setup a
ingress vlan rule that translates this port in to an untagged svlan port,
but when I do this I lose connectivity.
The egress, vlan, and trunks
I didn’t see anywhere you could actually modify the html for the skins but I
pretty much just went through the web interface and eliminated everything
except basic ip/ipv6/ppp/bridge/routes configuration and a couple of things in
the system menu and the whole tools menu. Left quickset
I know this will be full of opinion but what is everyone considering the
best performing and stable release for RouterOS currently?
We are pretty much running all 1036's and a 1072 right now.
Thanks,
Christian Palecek
Chief Operations Officer
Cybernet1 Inc.
Hamilton, MT
Vlans?
Sent from my Verizon, Samsung Galaxy smartphone
Original message From: Blair Davis via Mikrotik-users
Date: 5/2/17 7:06 PM (GMT-07:00) To: Mikrotik
Users Subject: [Mikrotik Users] Small setup...
I have a small
It just opens up to the last panel you had open under the username. If its
opening to a submap there is probably another client that is connected with the
submap open.
Sent from my Verizon, Samsung Galaxy smartphone
Original message From: Steve Barnes via Mikrotik-users
There is a lot of different flow analyzer's, i haven't found any free, but the
ones i have tried have all been rather similar.
Its not too heavy on resources but less is more when it comes to flows.
Probablyshould only need to watch your primary edge interfaces.
Sincerely,
Christian
I think there is better ways to accomplish what you want to do. Tend to bring
in the bad with the good when bonding and wireless has plenty bad to bring in.
Sincerely,
Christian Palecek, COO
Grizzly Broadband, LLC
Cybernet1 | 406.363.2183 (office)
christ...@cybernet1.com
Original