Hello,
I use OpenBSD 4.2-stable with a core2duo laptop. When I use GENERIC
kernel, 'halt -p' works perfectly. However, when I use GENERIC.MP,
'halt -p' does not work and says :
apm0: APM set power state: interface not connected (3)
the operating system has halted
Please
On Jan 25, 2008 9:13 AM, Nicolas Letellier [EMAIL PROTECTED] wrote:
I use OpenBSD 4.2-stable with a core2duo laptop. When I use GENERIC
kernel, 'halt -p' works perfectly. However, when I use GENERIC.MP,
'halt -p' does not work and says :
apm0: APM set power state: interface not
On Wed, 2008-01-23 at 15:53 -0800, David Newman wrote:
How you detect a VoIP flow may also be an issue. If your VoIP traffic
uses SIP, you can classify the signaling traffic on 5060/udp -- but then
the voice or video traffic will use RTP/RTCP and some ephemeral port
chosen during call
* Insan Praja SW [EMAIL PROTECTED] [2008-01-24 18:43]:
Hi Misc@,
I'm currently setup bgp router using openbgp. Routes learned from openbgpd
are stored in routing table 1. So, I got this client from NET2, coming from
the same interface that my ibgp peer coming from, and I want to pass client
If using sftp with WinSCP is still an option, but you do not want users to
have SSH access, this can be achieved easily with sshd_config-settings
like:
# override default of no subsystems
Subsystem sftp/usr/libexec/sftp-server
Match Group sftp
X11Forwarding no
On 2008/01/25 10:20, Edd Barrett wrote:
I was wondering if there is a way that pkg_add -u can save packages
that it installs into a specified directory.
See ENVIRONMENT in pkg_add(1).
Hi there,
I was wondering if there is a way that pkg_add -u can save packages
that it installs into a specified directory.
I think I could save a lot of bandwidth if this were possible, as I
have several machines to update with snapshots every 2 weeks or so.
Just an idea.
--
Best Regards
tess
Edd Barrett [Fri, Jan 25, 2008 at 10:20:50AM +] wrote:
I was wondering if there is a way that pkg_add -u can save packages
that it installs into a specified directory.
I think I could save a lot of bandwidth if this were possible, as I
have several machines to update with snapshots every 2
Here's a patch for the mkhybrid man page:
http://dickman.org/openbsd/mkhybrid_man_update.patch
Changes are as follows:
- remove references to outdated cd burning packages and non-working urls
- update the url for the creator/type database to a working link
- spelling fixes
Quoting L. V. Lammert [EMAIL PROTECTED]:
On Fri, 25 Jan 2008, Frank Bax wrote:
Boris Goldberg wrote:
Hello Daniel,
I believe it should be possible to set up samba-over-ssh. I
mean samba
listening localhost only on the server
andputty
Hi,
thanks to all for the answers. I am learning a lot... but the lacuna
was much bigger than I thought.
I have found this
http://www.wiretex.de/shop/product_info.php/info/p632_UBIQUITI-SRC-2-4GHz---5GHz-300mW-Sendeleistung.html
in ebay there's right now a good offer... The description of the
Just passing through while looking for something else, but can help:
Aaron ml at proficuous.com writes:
my pf.conf:
...
pass in on fxp3 inet proto tcp from $lan_net port { ssh www ntp https smtp
imap imaps domain } to any
...
pass in on fxp3 inet proto udp from $lan_net port { domain ntp }
Hi David,
On Fri, 25 Jan 2008 13:24:25 -0500
David Goldsmith [EMAIL PROTECTED] wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
We have two firewalls running OpenBSD 4.2 with PF and CARP. We have
two web servers that we want to load balance traffic between and have
clients stay
On Fri, 25 Jan 2008 09:43:36 +0100, Pierre Riteau wrote:
On Jan 25, 2008 9:13 AM, Nicolas Letellier [EMAIL PROTECTED] wrote:
I use OpenBSD 4.2-stable with a core2duo laptop. When I use GENERIC
kernel, 'halt -p' works perfectly. However, when I use GENERIC.MP,
'halt -p' does not work and says
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Joerg Zinke wrote:
| Hi David,
|
| rdr on $int_if proto tcp from any to $webserver port $webports - \
| ~webpool round-robin sticky-address
|
| ^^^ I think the second rule is not needed if hoststated is running.
| AFAIK this second rule will
the man pages of opencvs are cvs.1, cvs.5 ans cvsintro.7 (know I remember) in
the source directory of opencvs, that is : /usr/src/usr.bin/cvs/
a little mdoc -mandoc cvs.1 and there you go !
On Jan 26, 2008 8:43 AM, xavier brinon [EMAIL PROTECTED] wrote:
the man pages of opencvs are cvs.1, cvs.5
the man pages of opencvs are cvs.1, cvs.5 (as far as I remember) in
the source directory of opencvs
On Jan 25, 2008 4:38 PM, Julian Leyh [EMAIL PROTECTED] wrote:
On 11:57 Sun 20 Jan , Darrin Chandler wrote:
On Sun, Jan 20, 2008 at 06:31:48PM +, Stuart Henderson wrote:
On 2008/01/20
Urban Hillebrand wrote:
If using sftp with WinSCP is still an option, but you do not want users to
have SSH access, this can be achieved easily with sshd_config-settings
like:
# override default of no subsystems
Subsystem sftp/usr/libexec/sftp-server
Match Group sftp
On Fri, Jan 25, 2008 at 03:00:34PM -0500, Daniel Dickman wrote:
Here's a patch for the mkhybrid man page:
http://dickman.org/openbsd/mkhybrid_man_update.patch
Changes are as follows:
- remove references to outdated cd burning packages and non-working urls
- update the url for the
Boris Goldberg wrote:
Hello Daniel,
I believe it should be possible to set up samba-over-ssh. I mean samba
listening localhost only on the server andputty
(www.chiark.greenend.org.uk/~sgtatham/putty/) with port forwarding on
clients.
Thanks,
I don't
Here's a patch for the mkhybrid man page:
http://dickman.org/openbsd/mkhybrid_man_update.patch
Changes are as follows:
- remove references to outdated cd burning packages and non-working urls
- update the url for the creator/type database to a working link
- spelling fixes
general
I cannot answer your question. However, some suggestions:
1) Once you enable hoststated, you do not need the following line in pf:
rdr on $int_if proto tcp from any to $webserver port $webports - \
~webpool round-robin sticky-address
2) And in hoststated you can use backup table for
Boris Goldberg wrote:
Hello Daniel,
I believe it should be possible to set up samba-over-ssh. I mean samba
listening localhost only on the server andputty
(www.chiark.greenend.org.uk/~sgtatham/putty/) with port forwarding on
clients.
You can also use
If your interest is seeing the code, not being able to get it for
free, then talk to the SftpDrive people; they're a down to earth group
of guys, and are really great to work with, and for all I know, they
might be perfectly open to letting you see the code.
On Jan 24, 2008 7:41 PM, Daniel
Mitja Muenih wrote:
Wrong procedure - you never need a -I or -i again, once you have created the
set initially. At this point you can try to salvage your setup by adding
wd0d as spare, then simply fail component0 (raidctl -vF component0 raid0).
Don't do any reinitialization as you did.
Mitja
* Insan Praja SW [EMAIL PROTECTED] [2008-01-25 16:46]:
On Fri, 25 Jan 2008 16:28:42 +0700, Henning Brauer [EMAIL PROTECTED]
wrote:
* Insan Praja SW [EMAIL PROTECTED] [2008-01-24 18:43]:
Hi Misc@,
I'm currently setup bgp router using openbgp. Routes learned from
openbgpd
are stored in
On Fri, 25 Jan 2008 16:28:42 +0700, Henning Brauer [EMAIL PROTECTED]
wrote:
* Insan Praja SW [EMAIL PROTECTED] [2008-01-24 18:43]:
Hi Misc@,
I'm currently setup bgp router using openbgp. Routes learned from
openbgpd
are stored in routing table 1. So, I got this client from NET2, coming
from
On Fri, Jan 25, 2008 at 03:17:55PM +0200, Lars Noodin wrote:
How should I go about recording the process id for the OpenNTP daemon?
Usually processes get written in /var/run/
Many daemons allow relocation via options or the config file e.g.
/usr/sbin/apt-cacher -d -p
On Fri, Jan 25, 2008 at 06:41:53AM -0500, Daniel Dickman wrote:
Here's a patch for the mkhybrid man page:
http://dickman.org/openbsd/mkhybrid_man_update.patch
Changes are as follows:
- remove references to outdated cd burning packages and non-working urls
- update the url for the
On Fri, Jan 25, 2008 at 09:32:31PM +, Jacob Meuser wrote:
What would be considered upstream for mkhybrid? mkisofs (which
mkhybrid seems to be based on) is now part of the cdrtools package
(http://cdrecord.berlios.de/private/cdrecord.html). And as
announced[1] while mkisofs is still
How should I go about recording the process id for the OpenNTP daemon?
Usually processes get written in /var/run/
Many daemons allow relocation via options or the config file e.g.
/usr/sbin/apt-cacher -d -p /var/run/apt-cacher.pid;
/usr/local/sbin/dnsmasq
* Lars Noodin [EMAIL PROTECTED] [2008-01-25 14:20]:
How should I go about recording the process id for the OpenNTP daemon?
Usually processes get written in /var/run/
Many daemons allow relocation via options or the config file e.g.
/usr/sbin/apt-cacher -d -p /var/run/apt-cacher.pid;
Claudio Jeker wrote:
We don't believe in pid files. Use pgrep(1) and pkill(1) instead, you will
never have stale info that way.
Sweet! Use of pid files seemed like an anachronism anyway. pkill does
what I wanted. Now I don't have to write an extra shell script.
-Lars
Hello Daniel,
I believe it should be possible to set up samba-over-ssh. I mean samba
listening localhost only on the server andputty
(www.chiark.greenend.org.uk/~sgtatham/putty/) with port forwarding on
clients.
You can also use samba-over-ipsec. IPSec is
On 11:57 Sun 20 Jan , Darrin Chandler wrote:
On Sun, Jan 20, 2008 at 06:31:48PM +, Stuart Henderson wrote:
On 2008/01/20 10:15, Unix Fan wrote:
Stuart Henderson wrote:
See for yourself: http://www.openbsd.org/cgi-bin/cvsweb/src/usr.bin/cvs/
I'm slighly confused by
On Jan 25, 2008 10:46 AM, Bernd Ahlers [EMAIL PROTECTED] wrote:
Read the pkg_add(1) manpage again and look for PKG_CACHE.
Great! Many thanks!
--
Best Regards
Edd
http://students.dec.bournemouth.ac.uk/ebarrett
Hi [EMAIL PROTECTED]
After careful thinking, I started reading the manpages again, more
exactly raidctl(8) and raid(4). Of course, I was not paying attention
the first 5 times i've read them ( stupid me ).
In raidctl (8) it states clearly the special circumstances for setting
up a raid
On Fri, 25 Jan 2008, Frank Bax wrote:
Boris Goldberg wrote:
Hello Daniel,
I believe it should be possible to set up samba-over-ssh. I mean samba
listening localhost only on the server andputty
(www.chiark.greenend.org.uk/~sgtatham/putty/) with port
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
We have two firewalls running OpenBSD 4.2 with PF and CARP. We have two
web servers that we want to load balance traffic between and have
clients stay connected to one server as long as that server is up.
Our /etc/pf.conf and /etc/hoststated.conf
On January 24, 2008 04:58:57 pm Daniel Ouellet wrote:
Hi,
I need some possible suggestions if I may asked to not setup, or have to
setup WebDav on OpenBSD to allow users to do their web folder stuff. It
can be setup with ftp for example to allow them to map a folder in their
network place on
41 matches
Mail list logo
