On Tue, Nov 13, 2012 at 12:01:31AM +0200, Ville Valkonen wrote:
Hello all,
I was surfing on a Web when suddenly all traffic stopped. Closer examination
revealed Too many open files failure with the dhclient. Since there have
been
You are not sufficiently current. That should have been
After the Noppoo keyboard plugged in, usbdevs -dv shows:
Controller /dev/usb0:
addr 1: high speed, self powered, config 1, EHCI root hub(0x), NEC(0x1033),
rev 1.00
uhub0
port 1 powered
port 2 powered
port 3 powered
Controller /dev/usb1:
addr 1: high speed, self powered, config 1, EHCI
On an IBM THinkpad T40, dmesg reports address conflicts
and I am not sure what exactly that means and whether to worry.
The full dmesg and the full output of pcidump -v are below.
Here are the snipets that seem relevant.
0:31:1: Intel 82801DBM IDE
0x: Vendor ID: 8086 Product ID:
On other Thinkpads, this seems to be the case too:
http://article.gmane.org/gmane.os.openbsd.newbies/2234
On Wed, Nov 14, 2012 at 3:24 PM, yunplusplus yunplusp...@163.com wrote:
After the Noppoo keyboard plugged in, usbdevs -dv shows:
Controller /dev/usb0:
addr 1: high speed, self powered, config 1, EHCI root hub(0x),
NEC(0x1033), rev 1.00
uhub0
port 1 powered
port 2 powered
port 3
On 2012-11-14, Sebastian Reitenbach sebas...@l00-bugdead-prods.de wrote:
Hi,
we have a HP Proliant Server Gen8, where we want to run OpenBSD on it.
The card mentioned has to go into the FlexibleLOM port on the server,
therefore
there is not that much choice of a card.
As far as I have
On Saturday, November 10, 2012 04:35:33 PM Philip Guenther wrote:
Hmm, it works for me, using an exports of
/usr/src -mapall=guenther 127.0.0.1
/usr/obj -mapall=guenther 127.0.0.1
and switching the -mapall on /usr/src from guenther to otheruser,
pkill -HUP mountd, then testing by creating
On 2012-11-14, Tomas Bodzar tomas.bod...@gmail.com wrote:
However I think you need to do this (you need to do that and test on
current anyway)
http://undeadly.org/cgi?action=articlesid=20080315134047 or
http://undeadly.org/cgi?action=articlesid=20070207152423 because I
can't see your device
I pre-ordered the 5.2 disksets and four t-shirts on September 8th. I'm
located just outside of Toronto, so there shouldn't be a problem with
international shipping.
November 1st came and went, with no disksets or t-shirts in sight. Since
the days of 2.8, I've always received the disksets
Hello, i'd like to inform a problem when dettaching an external 1TB USB
disk drive , the system just freezes, i can't type anything. Also It
stops responding to ping.
If i don't unplug it then i can use the disk normally, i can copy and
delete files with no problem. But as soon as i unplug the
Hi,
I am hoping that I may be able to somehow reach the consultant that
support the router server at Equinix in Ashburn VA here, or may be
someone else can provide me a bit more details as to how I could
possibly find more details or history on this problem.
There is a dual setup at Equinix
You *do* know about mount(8)/umount(8), right?
On Wed, Nov 14, 2012 at 04:22:20PM -0300, Marcos Laufer wrote:
Hello, i'd like to inform a problem when dettaching an external 1TB
USB disk drive , the system just freezes, i can't type anything.
Also It stops responding to ping.
If i don't
On Wed, Nov 14, 2012 at 04:57:17PM -0500, Daniel Ouellet wrote:
Hi,
I am hoping that I may be able to somehow reach the consultant that
support the router server at Equinix in Ashburn VA here, or may be
someone else can provide me a bit more details as to how I could
possibly find more
On Wed, Nov 14, 2012 at 9:37 PM, Stuart Henderson s...@spacehopper.org wrote:
On 2012-11-14, Tomas Bodzar tomas.bod...@gmail.com wrote:
However I think you need to do this (you need to do that and test on
current anyway)
http://undeadly.org/cgi?action=articlesid=20080315134047 or
Hello,
In the meanwhile I have discovered the following issues:
[WITH SSL]:
1) No headers directives are allowed - the session is reported as invalid
2)
If the POST arguments are sent as usual, like this:
$ curl -XPOST -k -v
https://server/cgi-bin/query -d'param1=val1param2=val2'
relayd
On Wednesday, November 14, 2012 21:27 CET, Stuart Henderson
s...@spacehopper.org wrote:
On 2012-11-14, Sebastian Reitenbach sebas...@l00-bugdead-prods.de wrote:
Hi,
we have a HP Proliant Server Gen8, where we want to run OpenBSD on it.
The card mentioned has to go into the
Hi,
I'm also looking to make this car working. I found some patches against 4.9 but
it crashes when you trying to assign IP to the interface. I found that the
supporting code is in stable freebsd so maybe it could be imported from there ?
Does anywane have working patch for openbsd ?
Regards,
17 matches
Mail list logo
