On Wed, May 22, 2013 at 3:30 AM, Bogdan Andu bo...@yahoo.com wrote:
I compile from source Erlang R14B04 on a freshly installed OpenBSD 5.3 amd64
machine, configured with preinstalled opensssl library
/usr/lib/libssl.so.19.0 .
This was fixed upstream in R15B03:
On 26/12/12(Wed) 20:54, Miod Vallat wrote:
Just upgraded to a current again, with the same problem,
and the same solution:
[...]
wdc1 at kauaiata0 irq 39: DMA
atapiscsi0 at wdc1 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: MATSHITA, DVD-R UJ-825,
On May 23 08:41:50, mpieuc...@nolizard.org wrote:
On 26/12/12(Wed) 20:54, Miod Vallat wrote:
Just upgraded to a current again, with the same problem,
and the same solution:
[...]
wdc1 at kauaiata0 irq 39: DMA
atapiscsi0 at wdc1 channel 0 drive 0
scsibus0 at atapiscsi0: 2
On Wed, 22 May 2013, Lars Nooden wrote:
[snip]
However, the remote machine is still able to use the forwarded port until
the connection is finally closed. The same syntax seems to shutdown
regular (-L) forwarded ports, just not for reverse (-R) forwarding. What
am I missing?
What I was
Hi,
Having finally found the BCM5718 Programmers guide from
http://www.broadcom.com/support/ethernet_nic/open_source.php I managed
to get a bit further with this problem.
The problem seems to be in the Auto polling of the mac link state.
ifconfig shows the correct link state, but the
On Thu, May 23, 2013 at 10:58:32AM +0300, Lars Nooden wrote:
On Wed, 22 May 2013, Lars Nooden wrote:
[snip]
However, the remote machine is still able to use the forwarded port until
the connection is finally closed. The same syntax seems to shutdown
regular (-L) forwarded ports, just
Thank you all for your answers.
The migration to R15 or even R16 is
complicated, as a lot of code must be modified and a lot of teste must be
conducted
in order to make things correctly.
The fact is newer does not make
it better. There are so many applications that run a lot better in R14 than
I want to auto clean old distfiles no longer associated with new ports source.
first
# /usr/ports/infrastructure/bin/dpb -D HISTORY-ONLY
dpb begin fetch all distfiles and build packages!
I realize mistype PARAM HISTORY-ONLY instead of HISTORY_ONLY
then I press ctrl+c to break it.
and then
#
Hello,
I was reading about ssh certificates and was curious how to
inform logging user about this certificate expiration.
IIRC it is not possible by default now, so an option would be to
have a repository with all signed certificates and check the certs
for expiration. Then next idea was how to
On Tue, May 21, 2013 at 07:52:01PM +0200, mxb wrote:
Try openbsdeurope.com next time. I already got mine. Last week.
//mxb
On 21 maj 2013, at 19:26, Peter J. Philipp p...@centroid.eu wrote:
I ordered my CD through a german bookstore that is listed at
www.openbsd.org/orders.html.
Christian Weisgerber wrote:
FWIW, the Intel Centrino Ultimate-N 6300 iwn(4) in my non-t X230
works just fine. That's the 3x3 card on their order site.
Could you please check the exact model and FCC ID of that card?
The (non-t) X230 that I bought came with the
Intel Centrino Wireless-N 2200
Sorry for the quick re-post, apparently the whitelist checks
the FRU P/N, and this seems to be the full list:
http://download.lenovo.com/parts/ThinkPad/x230_x230i_fru_bom_20130410.pdf
So, when buying one for a thinkpad make sure its FRU is in that list.
I got a generic one and it is not working..
On Thu, May 23, 2013 at 07:43:56AM +1000, John Tate wrote:
When I go to update ports by anoncvs it just hangs, it's been like this for
hours. Something doesn't seem right.
elijah:usr # cvs -qd anon...@anoncvs.ca.openbsd.org:/cvs get -rOPENBSD_5_3
-P ports
Did you check what ^T tells?
--
On 19/04/13 15:53, Kapetanakis Giannis wrote:
ps. msg thread in http://marc.info/?t=13626767111r=1w=2
On 23/05/13 17:49, Stuart Henderson wrote:
On 2013/05/17 15:33, Kapetanakis Giannis wrote:
Thanks for replying.
When I have remote OSPF routers on those areas then everything works
On Thu, May 23, 2013 at 14:26, Thanos Tsouanas wrote:
Christian Weisgerber wrote:
FWIW, the Intel Centrino Ultimate-N 6300 iwn(4) in my non-t X230
works just fine. That's the 3x3 card on their order site.
Could you please check the exact model and FCC ID of that card?
The (non-t) X230
On Thu, May 23, 2013 at 02:26:39PM +0200, Thanos Tsouanas wrote:
Christian Weisgerber wrote:
FWIW, the Intel Centrino Ultimate-N 6300 iwn(4) in my non-t X230
works just fine. That's the 3x3 card on their order site.
Could you please check the exact model and FCC ID of that card?
The
Were you thinking of something like that? It works for me (c) tm, with
my PowerBooks (disk@0/wd0), I haven't tried NFS boot yet.
Not exactly, but your version is probably better than what I was
thinking of. However, it will not allow for root on the second wd disk
of a controller, or on any
We had a short outage today and I think it might have been due to our
firewall. I can see that we hit the limit for this variable but I'm not
really sure what it does or if it is safe to set it higher. I found the
following at the time of the outage in the log:
May 23 09:57:27 shiva2 /bsd:
On Thu, May 23, 2013 at 12:03:48PM +0100, Michael Stevens wrote:
On Tue, May 21, 2013 at 07:52:01PM +0200, mxb wrote:
Try openbsdeurope.com next time. I already got mine. Last week.
//mxb
On 21 maj 2013, at 19:26, Peter J. Philipp p...@centroid.eu wrote:
I ordered my CD through
Hi
I'm brand new to OpenBSD and live in Swansea UK. I received my installation cds
from Manchester over a weekend and Matt Lucas's book within about 10 days from
the USA.
Thanks for all the great documentation to get me started.
Moss
On Thu, May 23, 2013 at 01:53:59PM -0400 or thereabouts,
On 2013-05-23, james ja...@wintercastle.net wrote:
We had a short outage today and I think it might have been due to our
firewall. I can see that we hit the limit for this variable but I'm not
really sure what it does or if it is safe to set it higher. I found the
following at the time of
On Thu, May 23, 2013 at 11:04 +0200, David Imhoff wrote:
Hi,
Having finally found the BCM5718 Programmers guide from
http://www.broadcom.com/support/ethernet_nic/open_source.php I
managed to get a bit further with this problem.
The problem seems to be in the Auto polling of the mac link
Hi List !
I'm trying to implement a firewall with squid TPROXY in an environment with
bridge.
vio0 = external if
vio1 = internal if
bridge0 = (vio0 + vio1)
I have these rules, the connections pass through it, but nothing comes on the
side of the divert-to (did tests with nc -l 3128)
I created a new filesystem on a 232.9 GB partition on a 500 GB external
USB drive that will be used as backup storage for dump files. Out of
curiosity, I recreated the filesystem using FFS2 (I never created an
FFS2 before). I noticed it was much faster, so I clocked it for comparison:
# ###
On Thu, May 23, 2013 at 14:01, Clint Pachl wrote:
I created a new filesystem on a 232.9 GB partition on a 500 GB external
USB drive that will be used as backup storage for dump files. Out of
curiosity, I recreated the filesystem using FFS2 (I never created an
FFS2 before). I noticed it was
On Thu, May 23, 2013 at 2:38 AM, Bogdan Andu bo...@yahoo.com wrote:
./configure
sudo gmake install
the same error
You need to run autoreconf, to regenerate configure from configure.in.
On Thu, May 23, 2013 at 01:21:55PM -0400, james wrote:
We had a short outage today and I think it might have been due to our
firewall. I can see that we hit the limit for this variable but I'm not
really sure what it does or if it is safe to set it higher. I found the
following at the time
On 21.5.2013. 23:23, Claudio Jeker wrote:
Hi,
sorry for delay, we are in the middle of the network migration from
cisco to extreme and i thought when everything calms down to test it
with cisco and extreme equipment. I'm planning to test it next week.
I found some issues with the diff
Hi all,
I did some tests with OpenBSD 5.3 running as a Hyper-V 2012 virtual machine and
the performance is disappointing (see
http://guillaume.filion.org/blog/archives/2013/05/openbsd_networking_performance_hyperv_2012.php
for data).
Is there anyone working on porting the FreeBSD Hyper-V
With Ouya consoles starting to make it to market, I'm wondering if
there's a chance that OpenBSD could be ported to it. This is something
I would love to help with but have no idea where to begin. The
documentation for the Tegra3 is available from nvidia's website, though
you have to register
30 matches
Mail list logo
