Re: wle200nx WiFi card on apu2b4 - no link

> -> athn0 at pci4 dev 0 function 0 "Atheros AR9281" rev 0x01: apic 4 int 16 > -> athn0: AR9280 rev 2 (2T2R), ROM rev 22, address AR9281 and AR9280 are two different chips as they are listed in the man page. Why does your dmesg report 2 chips?

Re: High interrupt load using 5.8 Release GENERIC i386 on Acer Aspire 3630 laptop

peter.foster.li...@gmail.com wrote: > On Sun, Dec 27, 2015 at 2:25 PM, Tati Chevron wrote: > > > > I have an Acer Aspire 3610, which has run every -release since at least > > 5.0 without problems. Certainly, I've not seen this high interrupt load. > > > > On the other hand,

Re: wle200nx WiFi card on apu2b4 - no link

Mihai Popescu [mih...@gmail.com] wrote: > > -> athn0 at pci4 dev 0 function 0 "Atheros AR9281" rev 0x01: apic 4 int > > 16 > > -> athn0: AR9280 rev 2 (2T2R), ROM rev 22, address > > AR9281 and AR9280 are two different chips as they are listed in the man page. > Why does your dmesg

owncloud and php5-libsmbclient / occ

Hi, the upgrade from 5.7 to 5.8 implies owncloud upgrade from 8.0.2 to 8.1. With this upgrade, the php library php5-libsmbclient is needed: https://doc.owncloud.org/server/8.1/admin_manual/release_notes.html Unfortunately a similar library is not present either in 5.8 packages or in -current

Re: wle200nx WiFi card on apu2b4 - no link

> seems that I am not alone. This can be changed. But you and other users need to provide some information. Try a snapshot install and simple commands like: $ ifconfig athn0 scan (this scans for available WiFi networks) $ ifconfig athn0 debug (enable debug mode) Be sure your AP is accesible

Re: wle200nx WiFi card on apu2b4 - no link

Hello Mihai, seems that I am not alone: http://permalink.gmane.org/gmane.os.openbsd.misc/227232 Regards, Stefan -Ursprüngliche Nachricht- Von: owner-m...@openbsd.org [mailto:owner-m...@openbsd.org] Im Auftrag von Mihai Popescu Gesendet: Dienstag, 29. Dezember 2015 19:27 An:

Re: owncloud and php5-libsmbclient / occ

Also, if one would like to use occ utility from CLI, considering that the whole owncloud runs chrooted under /var/www/ and that occ therefore looks for /owncloud/apps folder (which is obviously /var/www/owncloud/apps) and that www user is a nologin one, trying to run the following command: #

adventures in wifi roaming

I am working on a script that keeps me connected to wifi all the time and I thought it might be neat to have it notice when the signal is weak and look for another station with a different BSSID but the same SSID to connect to and connect to it with minimal interruption. ifconfig let's me notice

Re: owncloud and php5-libsmbclient / occ

On Wed, Dec 30, 2015 at 01:29:15AM +0100, Paolo Aglialoro wrote: > Hi, > > the upgrade from 5.7 to 5.8 implies owncloud upgrade from 8.0.2 to 8.1. > With this upgrade, the php library php5-libsmbclient is needed: > https://doc.owncloud.org/server/8.1/admin_manual/release_notes.html >

Re: owncloud and php5-libsmbclient / occ

On Tue, 29 Dec 2015 20:43:49 -0500 Johan Huldtgren wrote: > > Also, if one would like to use occ utility from CLI, considering that the > > whole owncloud runs chrooted under /var/www/ and that occ therefore looks > > for /owncloud/apps folder (which is

5.8: Cannot communicate with iDrac6 once OpenBSD boots (Broadcom BCM5709 via bnx)

Hello, I have a Dell T710 server with a 4-port Broadcom BCM5709 NIC that hosts iDrac6 via port 1. The iDrac configuration has this port set up with a unique MAC and static IP. This port is supposed to be shared with the operating system and under Linux I have no problems continuing to access

Re: audio capturing

Alexandre Ratchov caoua.org> writes: > > i want to capture with ffmpeg from dosbox (no, internal dosbox capture > > don't need) > > you could expose a device that monitors what programs play: > > sndiod_flags="-s default -m play,mon -s mon" doesn't dosbox port only support midi via sndio?

Re: audio capturing

On 12/29/15 14:21, Alexandre Ratchov wrote: > On Mon, Dec 28, 2015 at 05:45:40PM +0300, Kirill wrote: >> On 12/28/15 17:21, Jan Stary wrote: >>> On Dec 28 16:46:24, nightl...@nightbbs.ru wrote: I want to capture audio from another app to file or simply stdout. How can I do this? >>> It

Re: audio capturing

On Mon, Dec 28, 2015 at 05:45:40PM +0300, Kirill wrote: > On 12/28/15 17:21, Jan Stary wrote: > > On Dec 28 16:46:24, nightl...@nightbbs.ru wrote: > >> I want to capture audio from another app to file or simply stdout. How > >> can I do this? > > It woould be easier to help you you just said what