Troubleshooting FDE with SD Card Reader

I cannot use my SD Reader for keydisk purposes. It does show up in dmesg and should be there on boot. Since my SD reader is bundled with a Sony MemoryStick reader I see them both coming up when I plug in the SD Card. The MS umass shows first on sd0 even if empty so the SD gets pushed to sd1.

Re: problem with iscsid and other Target

I have mistake ... > #sources #FreeBSD Target 192.168.0.2 > #FreeBSD Target 192.168.0.3 > ## then service ctld start > > #OpenBSD Initiator 192.168.0.3 > #OpenBSD Initiator 192.168.0.2 > # cat <<_EOF_> /etc/iscsi.conf > target "array" { > targetaddr 192.168.0.2 > targetname

Re: bgpd between two 6.4 boxes. IPv6 flapping, IPv4 rock solid

29 Mar 2019, 18:57 by rr...@tutanota.de: > Hi, > > Has anyone encountered this before ? > > Neighbor    AS    MsgRcvd    MsgSent  OutQ Up/Down  State/PrfRcvd > EXT-V6-R2   65515 50 40 0 00:02:55 Active > EXT-V4-R2   65515 38 37 0

bgpd between two 6.4 boxes. IPv6 flapping, IPv4 rock solid

Hi, Has anyone encountered this before ? Neighbor    AS    MsgRcvd    MsgSent  OutQ Up/Down  State/PrfRcvd EXT-V6-R2   65515 50 40 0 00:02:55 Active EXT-V4-R2   65515 38 37 0 00:27:42  1 After approx just over 2 minutes, the V6

problem with iscsid and other Target

hi! I use the OpennBSD 6.4 and FreeBSD 12. recently, I tried OpenBSD iscsid with FreeBSD ctld. These are gave me a good perfomance for HDD with ffs & ntfs directry in use! But, I get the ANY Problem with iscsid and ctld. #problem 1. iscsid didn't have "chap auth" connection. 2. iscsid lost the

problem with iscsid and other Target

hi! I use the OpennBSD 6.4 and FreeBSD 12. recently, I tried OpenBSD iscsid with FreeBSD ctld. These are gave me a good perfomance for HDD with ffs & ntfs directry in use! But, I get the ANY Problem with iscsid and ctld. #problem 1. iscsid didn't have "chap auth" connection. 2. iscsid lost the

Re: How to overrule bioctl "chunk already in use"

29 Mar 2019, 02:42 by n...@holland-consulting.net: > On 3/28/19 10:29 AM, Rachel Roch wrote: > >> Hi, >> >> I've been following the instructions here >> https://www.openbsd.org/faq/faq14.html >> >> <>> https://www.openbsd.org/faq/faq14.html >>

Re: openbgpd; strip private ASNs from bgp updates

open...@kene.nu(open...@kene.nu) on 2019.03.29 08:36:26 +0100: > I forgot to add to my previous email. One thing that could be useful > in this case is to mimic the Cisco option "neighbor x.x.x.x > remove-private-as" which removes any private ASes from the path on any > updates to a peer. Just

Re: IBM x3650 M3 fatal page fault in supervisor mode

Today I successfully reproduced the installation process. OpenBSD 6.4 Machine type/ model: 7945B2G Host firmware (UEFI) 1.22, build date 2018-06-04 System settings - Processors Power C-States Report C2 to OS Virtualization VT-d Cache Data Prefetch Data Reuse Execute Disable

Re: athn0: bad ROM checksum 0x2c64

On Sun, Feb 10, 2019 at 07:12:38PM +0100, Sebastian Reitenbach wrote: > I get the same bad ROM checksum message with the broken device, > and indeed, the device that worked before, now gives the same bad ROM checksum > message when I insert it. It only give a different checksum: > previously

Re: openbgpd; strip private ASNs from bgp updates

I forgot to add to my previous email. One thing that could be useful in this case is to mimic the Cisco option "neighbor x.x.x.x remove-private-as" which removes any private ASes from the path on any updates to a peer. Just throwing it out there, cant be a very difficult option to implement I