I'm attempting to install openbsd 7.4 on the above-mentioned board. I've
tried both the miniroot and install images with the same process and the
same outcome. Here is how I prepared the install sd card:
doas dd if=miniroot74.img of=/dev/mmcblk0 bs=1M
doas mount /dev/mmcblk0p1 /mnt
doas mkdir
On Mon, 25 Mar 2024 23:40:52 +0100, Karel Lucas wrote:
> After installing colorls and making some adjustments to the system, I
> still have no colored output from colorls. Below I have indicated the
> settings that have been made or are present by default. I would like
> to know what is wrong
Dear Benjamin,
In which configuration file can I change TERM?
Op 25-03-2024 om 23:46 schreef Benjamin Stürz:
On 25.03.24 23:40, Karel Lucas wrote:
Hi all,
After installing colorls and making some adjustments to the system, I
still have no colored output from colorls. Below I have indicated
Dear Amelia,
In which configuration file can I change this? Is 'wsvt25' universally
suitable for use?
Op 26-03-2024 om 00:03 schreef Amelia A Lewis:
On Mon, 25 Mar 2024 23:40:52 +0100, Karel Lucas wrote:
After installing colorls and making some adjustments to the system, I
still have no
On 25.03.24 23:40, Karel Lucas wrote:
Hi all,
After installing colorls and making some adjustments to the system, I
still have no colored output from colorls. Below I have indicated the
settings that have been made or are present by default. I would like to
know what is wrong and what needs
Hi all,
After installing colorls and making some adjustments to the system, I
still have no colored output from colorls. Below I have indicated the
settings that have been made or are present by default. I would like to
know what is wrong and what needs to be improved.
Default environment:
On Tue, 26 Mar 2024, at 04:30, Dan wrote:
> Eventually, having the kernel possibility to customize the config path
> from /etc in eg /heroxyz
> could be helpful for a firewall, what do you think?
Everything you to complicate ongoing admin will hinder your maintenance and IMO
this will make your
> I can ping6 back to my router using the IPv6 address in the prefix
> delegation from my ISP, but I cannot seem to do the same for the
> addresses in my ULA prefix.
I can see neighbor solicitation requests from my clients for the ULA
gateway address, but I see no neighbor advertisements sent in
On Mar 25 15:52:38, zeni...@proton.me wrote:
> Thanks for the quick response. It looks like hotplugd was what I was precisely
> looking for. As usual, my usecase was inside the manpage :).
> As a final note, I tried to do it with the resume script but it did not seem
> to
> work. I guess it was
El Mon, 25 Mar 2024 04:39:15 -0400
Steve Litt escribió:
> Does anyone know whether this hardware runs OpenBSD?
>
> https://www.walmart.com/ip/MeLE-Quieter3Q-Fanless-Mini-PC-N5105-Windows-11-8GB-256GB-4K-UHD-Wifi-6-Mini-Desktop-Computer-New/2177929669
>
> Thanks,
>
> SteveT
>
> Steve Litt
>
>> interface igc1 {
>> prefix fdbf:e79a:8e3e::/48
>
> lesser operating systems will refuse to form autoconf addresses if the
> prefix length is not 64.
Thanks, this was helpful. I got addresses allocated on client machines,
but they don't seem routable.
I can
Eventually, having the kernel possibility to customize the config path from
/etc in eg /heroxyz
could be helpful for a firewall, what do you think? :-)
-Dan
Mar 25, 2024 18:06:10 Dan :
>> /etc is always going to be problematic. I've been experimenting
>> to see if I can create a viable
Lyndon Nerenberg (VE7TFX/VE6BBM) :
> /etc is always going to be problematic. I've been experimenting
> to see if I can create a viable firewall config with a read-only
> root filesystem.
I do not know what do you mean by "experimenting if", and if you finally
realized your purpose.. but
[CC'ed to Kettenis in case he doesn't read misc@]
On 3/24/24 20:43, Peter J. Philipp wrote:
On 3/24/24 14:09, Slava Voronzoff wrote:
On Fri, 22 Mar 2024 04:28:15 +0100
"Peter J. Philipp" wrote:
No I didn't try a newer OBSD, I will soon though. :-) And no I didn't
change anything in
On Mon, Mar 25, 2024 at 04:39:15AM -0400, Steve Litt wrote:
> Does anyone know whether this hardware runs OpenBSD?
>
> https://www.walmart.com/ip/MeLE-Quieter3Q-Fanless-Mini-PC-N5105-Windows-11-8GB-256GB-4K-UHD-Wifi-6-Mini-Desktop-Computer-New/2177929669
>
> Thanks,
>
> SteveT
>
> Steve Litt
>
>
Omar Polo writes:
> or they can just upload to /usr/local or /home, or mess with /etc, or...
> I don't see how this would help.
It's another layer to make things more difficult.
If the writable filesystems are noexec and they can't take that
away, uploads become less valuable.
/etc is always
Thanks for the quick response. It looks like hotplugd was what I was precisely
looking for. As usual, my usecase was inside the manpage :).
As a final note, I tried to do it with the resume script but it did not seem to
work. I guess it was because the attachment takes a delay from the execution
Folks,
I have encountered a wired issue with touchpad: it stay in status similar to
pushed left button. I can move it, but I can't select anything.
If I make rigth click, it may clicks, or may ignore it.
I have no idea how to dig it, but it appears after move from 7.4 to
snapshot, and it's here
On 2024-03-24 13:20:13, Stuart Henderson wrote:
> But you already have the build toolchain running in the VM, right?
> IIUC the part you are having trouble with running in the VM is
> esptool, not the build toolchain.
>
> So, build in the VM, flash from esptool in the host OS.
>
> With a bit of
On Mon, Mar 25, 2024 at 12:13:06PM +, ZenitDS wrote:
> Hello,
> On boot the urtwn0 interface is configured as expected, but after
> I sleep using 'zzz', it gets resetted and I have to manually run
> 'sh /etc/netstart' with root priviliges to reconfigure the interface.
> I tried using
Hello,
On boot the urtwn0 interface is configured as expected, but after
I sleep using 'zzz', it gets resetted and I have to manually run
'sh /etc/netstart' with root priviliges to reconfigure the interface.
I tried using /etc/apm/resume, but running it there made no difference.
I have seen that
On Mon, Mar 25, 2024 at 11:41 AM Steve Litt
wrote:
> Does anyone know whether this hardware runs OpenBSD?
>
>
> https://www.walmart.com/ip/MeLE-Quieter3Q-Fanless-Mini-PC-N5105-Windows-11-8GB-256GB-4K-UHD-Wifi-6-Mini-Desktop-Computer-New/2177929669
>
> Thanks,
>
> SteveT
>
> Steve Litt
I guess
Steve Litt writes:
> Does anyone know whether this hardware runs OpenBSD?
>
> https://www.walmart.com/ip/MeLE-Quieter3Q-Fanless-Mini-PC-N5105-Windows-11-8GB-256GB-4K-UHD-Wifi-6-Mini-Desktop-Computer-New/2177929669
Maybe... Looking at:
Does anyone know whether this hardware runs OpenBSD?
https://www.walmart.com/ip/MeLE-Quieter3Q-Fanless-Mini-PC-N5105-Windows-11-8GB-256GB-4K-UHD-Wifi-6-Mini-Desktop-Computer-New/2177929669
Thanks,
SteveT
Steve Litt
Autumn 2023 featured book: Rapid Learning for the 21st Century
On 2024/03/24 19:01:00 -0700, "Lyndon Nerenberg (VE7TFX/VE6BBM)"
wrote:
> I am curious to hear peoples thoughts on adding some mount(2)
> hardening when the system is running at securelevel 2. Specifically:
>
> * do not allow removing MT_NODEV, MT_NOEXEC, MT_NOSUID,
> or
On 2024-03-24 23:33 +01, Evan Sherwood wrote:
> I'm not sure how to configure rad (or if rad is the right program) to
> help have my devices autoconfigured ULA addresses in a given prefix
> (generated from https://www.unique-local-ipv6.com).
>
> I am debugging a new ISP and need to switch between
26 matches
Mail list logo
