On 10/18/2017 09:02 PM, trondd wrote:
On Wed, October 18, 2017 6:15 pm, Limaunion wrote:
On 10/17/2017 05:44 PM, Stuart Henderson wrote:
On 2017-10-16, Limaunion <limaun...@fibertel.com.ar> wrote:
Hi! Last friday I upgraded my ALIX system from 6.0 to 6.2 using the PXE
boot method. In pr
On 10/17/2017 05:44 PM, Stuart Henderson wrote:
On 2017-10-16, Limaunion <limaun...@fibertel.com.ar> wrote:
Hi! Last friday I upgraded my ALIX system from 6.0 to 6.2 using the PXE
boot method. In previous years I used an internal FTP server to perform
the upgrade, but for some
On 10/16/2017 06:55 PM, Limaunion wrote:
Hi! Last friday I upgraded my ALIX system from 6.0 to 6.2 using the PXE
boot method. In previous years I used an internal FTP server to perform
the upgrade, but for some reason this is not supported any more since a
couple of releases. I mounted
Hi! Last friday I upgraded my ALIX system from 6.0 to 6.2 using the PXE
boot method. In previous years I used an internal FTP server to perform
the upgrade, but for some reason this is not supported any more since a
couple of releases. I mounted and published the ISO image using a
raspberrypi
On 05/29/2014 07:10 AM, Paco Esteban wrote:
On Thu, 29 May 2014, Marko Cupać wrote:
On Wed, 28 May 2014 21:40:58 +0200
Henning Brauer lists-open...@bsws.de wrote:
I'm pretty damn sure I added reset prio if queueing is on thing.
yes, in IF_ENQUEUE - hfsc_enqueue
m-m_pkthdr.pf.prio =
hi all! I'm running unbound as a caching resolver in an ALIX box running
OpenBSD 5.1.
For some reason I'm getting many of these kind of errors:
Jul 13 10:56:29 pfire unbound: [11449:0] notice: sendto failed: No
buffer space available
Jul 13 10:56:29 pfire unbound: [11449:0] notice: remote
On 07/13/2012 02:05 PM, Gonzalo L. R. wrote:
Conf file?
El 07/13/12 11:38, Limaunion escribió:
hi all! I'm running unbound as a caching resolver in an ALIX box running
OpenBSD 5.1.
For some reason I'm getting many of these kind of errors:
Jul 13 10:56:29 pfire unbound: [11449:0] notice
Hi all! very simple PF question, is it possible to limit the number of
ICMP echo replies, like 5/min from any source address ?
TIA!
hi misc! last week I tried to install 'unbound' and got these messages,
any ideas? (running 4.9)
TIA!
$ sudo pkg_add -rv unbound-1.4.7.tgz
Update candidates: quirks-1.32 - quirks-1.32 (ok)
unbound-1.4.7:libldns-1.6.7: ok
useradd: Warning: home directory `/var/unbound' doesn't exist, and -m
On 07/31/2011 07:13 AM, Henning Brauer wrote:
* Limaunionlimaun...@fibertel.com.ar [2011-07-17 02:26]:
hi all: I'm getting tons of messages like this one:
pf: state key linking mismatch! dir=OUT, if=vr1, stored af=2, a0:
83.237.186.131:51413, a1: 192.168.1.2:64768, proto=17, found af=2,
a0:
hi all: I'm getting tons of messages like this one:
pf: state key linking mismatch! dir=OUT, if=vr1, stored af=2, a0:
83.237.186.131:51413, a1: 192.168.1.2:64768, proto=17, found af=2, a0:
192.168.1.2:64768, a1: 181.110.135.229:51413, proto=17
The public 'a1' address (181.110.135.229) is
hi misc! I've recently switched my alix box from 4.7 to 4.9. This box is
mainly used as a home firewall with PF superpower :) What I'm finding is
that the State Table has _all_the_time a constant rate of ~ 120-150/s
searches and I'm pretty sure this is something new (since the upgrade?).
On 12/27/2010 12:43 PM, Orestes Leal R. wrote:
postsuper: fatal: scan_dir_push: open directory active: Permission denied
just googling found this:
http://www.irbs.net/internet/postfix/0505/1336.html
HTH.
On 07/17/2010 08:07 PM, Mateusz Gierblinski wrote:
Hi misc@
I'm just wondering. Where are you OpenBSD users from?
I'm from Belgium, anyone else?
Take care
Buenos Aires, Argentina, South America.
Limaunion wrote:
Hi, for some reason my OpenBSD 4.4 firewall is been able to negotiate
dhcp request although there are no rules that allow this operation.
Thanks everyone for the explanation, I wasn't sure what was wrong with
my configuration. Now it's clear.
Best regards.
JC
Hi, for some reason my OpenBSD 4.4 firewall is been able to negotiate
dhcp request although there are no rules that allow this operation.
If I issue a 'dhclient vr0' I get the following:
$sudo dhclient vr0
DHCPREQUEST on vr0 to 255.255.255.255 port 67
DHCPACK from 190.18.xx.yy
bound to
Paul M wrote:
Hi all
I'm attempting to install 4.3-release on an old compac but I'm getting
random freezes shortly after boot. The most it has stayed up is about
1/2 hour, usually it'll die within a few minutes, sometimes it'll die
during boot - once it even failed during the install process.
Hi there, I just got an ALIX2C2 and installed a 1GB CF with an already
working OpenBSD 4.2 system. For some reason I get this after powering up
the unit:
PC Engines ALIX.2 v0.98
640 KB Base Memory
261120 KB Extended Memory
01F0 Master 044A CF CARD 1GB
Phys C/H/S 1966/16/63 Log C/H/S
Markus Hennecke wrote:
On Sat, 12 Jan 2008, Limaunion wrote:
Hi there, I just got an ALIX2C2 and installed a 1GB CF with an already
working OpenBSD 4.2 system. For some reason I get this after powering up
the unit:
PC Engines ALIX.2 v0.98
640 KB Base Memory
261120 KB Extended Memory
01F0
Rolf Sommerhalder wrote:
Any other suggestion ?
It looks as if your ALIX booted through all stages and successfully
loaded the kernel /bsd, but fails to start this kernel. Maybe check
out http://www.openbsd.org/faq/faq14.html#Boot386 , notably item 4.,
to help with diagnosis and repair.
Are
Limaunion wrote:
Rolf Sommerhalder wrote:
Any other suggestion ?
It looks as if your ALIX booted through all stages and successfully
loaded the kernel /bsd, but fails to start this kernel. Maybe check
out http://www.openbsd.org/faq/faq14.html#Boot386 , notably item 4.,
to help with diagnosis
mickey wrote:
On Sat, Nov 24, 2007 at 12:13:41PM -0300, Limaunion wrote:
Hi misc! I upgraded my old i486 box to a _new_ pentium 166, but after
less than 24 hours running it I got a kernel crash. I'm sending dmesg
plus some screenshots from ps + trace + show registers.
this looks like a signal
mickey wrote:
On Sat, Nov 24, 2007 at 12:13:41PM -0300, Limaunion wrote:
Hi misc! I upgraded my old i486 box to a _new_ pentium 166, but after
less than 24 hours running it I got a kernel crash. I'm sending dmesg
plus some screenshots from ps + trace + show registers.
this looks like a signal
IC1igo Tejedor Arrondo wrote:
El sC!b, 10-11-2007 a las 01:18 +0100, IC1igo Tejedor Arrondo escribiC3:
oops
The sources (5.3Mm at 33k of upload):
http://inigo.homeunix.net/art.tgz
It is:
http://inigo.homeunix.net/art/art.tgz
No luck here:
Not Found
The requested URL
Nick Holland wrote:
Limaunion wrote:
hi all! I've been using OpenBSD during the last 2-3 years mainly running
it as a firewall.
I've an old machine (486 + 48MB RAM) and yesterday decided to make
some improvements: upgrade it from 4.0 to 4.2 (new installation) and
replace the two NICs
hi all! I've been using OpenBSD during the last 2-3 years mainly running
it as a firewall.
I've an old machine (486 + 48MB RAM) and yesterday decided to make
some improvements: upgrade it from 4.0 to 4.2 (new installation) and
replace the two NICs, switching from NE2000 clones (RTL8029) to
hi all! I've been using OpenBSD since a long time running it as a firewall.
This in an old machine (486 + 48MB RAM) and yesterday I decided to make
some improvements: upgrade it from 4.0 to 4.2 (new installation) and
replace the two NICs, switching from NE2000 clones (RTL8029) to 3C905B.
The
hi all! I've been using OpenBSD during the last 2-3 years mainly running
it as a firewall.
I've an old machine (486 + 48MB RAM) and yesterday decided to make
some improvements: upgrade it from 4.0 to 4.2 (new installation) and
replace the two NICs, switching from NE2000 clones (RTL8029) to
hi all! I've been using OpenBSD during the last 2-3 years mainly running
it as a firewall.
I've an old machine (486 + 48MB RAM) and yesterday decided to make
some improvements: upgrade it from 4.0 to 4.2 (new installation) and
replace the two NICs, switching from NE2000 clones (RTL8029) to
David Given wrote:
I have a machine with 48MB of RAM that I want to use as a server.
The OpenBSD kernel is a bit over 5MB. I assume that gets loaded into memory
and is not swappable, giving me 43MB left, which isn't a lot.
Is it worth recompiling the kernel to remove support for features I'm
Hi there,
I'm having a strange problem, my keyboard isn't working under OBSD 3.8.
This keyboard works flawlesly in my other machines or in this machine
while navigating the PC BIOS or while typing some commands at the OBSD
boot prompt, but when I get the first vtty I can't do anything apart
Hi! I'm currently running Ubuntu/Linux in my notebook but would like
switching to OpenBSD. As far I know my wireless card isn't supported in
OpenBSD, which is a: Netgear WG511 ( Intersil Corporation Intersil
ISL3890 [Prism GT/Prism Duette] (rev 01) ). In Linux the driver is
available from the
32 matches
Mail list logo
