Hi misc
I want to implement simple MPLS network according to this page
http://lteo.net/blog/2013/09/03/a-small-mpls-test-network-built-with-openbsd/
but when configuring PE1 , after run this command ifconfig mpe0 mplslabel
666 i got this log
ifconfig: SIOCSETLABEL: Network is unreachable , why
-rw-r--r-- 1 root wheel
On Fri, Jul 10, 2015 at 4:00 PM, Jan Vlach ja...@volny.cz wrote:
Hi,
what's the output of
ls -l /etc/ospfd.conf
Jan
On Fri, Jul 10, 2015 at 03:54:50PM +0430, Reza Kakhki wrote:
Yesterday i tried to enable OSPF routing on OpenBSD 5.7 . so i created
/etc
Yesterday i tried to enable OSPF routing on OpenBSD 5.7 . so i created
/etc/ospfd.conf and added this codes to it ( just for test )
routet-id 127.0.0.1
area 0.0.0.0 {
interface em0
}
but after type /etc/rc.d/ospfd -fd start i got this logs in terminal
doing _rc_parse_conf
doing _rc_quirks
Gene,
I've used the PcEngines Alix2d3 board with Freebsd for a similiarly sized
office and had good success with it. We had a 30mbit pipe, 30 users, VoIP/QoS
and IPSec to our 3 data centers. Doing IPSec around 15mbit will put some load
on the CPU but it was able to handle it pretty well. I
Great, thanks for the info. This is my first time to get a rackmount server,
and I just wanna make sure
it is supported by OpenBSD ;)
As Juan Miscaro described on Wed, Jan 30, 2008 at 02:48:19PM -0500:
--- Reza Muhammad [EMAIL PROTECTED] wrote:
Hi all,
I'm looking to buy a server
that's sold
on Dell is using PCIe. Does OpenBSD support this?
Or should I buy from another brand, that fully supports OpenBSD? Is there any
recommendations?
I'm planning to buy a few servers for Gateway, Web, Mail, and LDAP
authentication.
Thanks in advance ;)
-Reza
anyone knows about IBM xSeries 3550? I checked on
http://www.openbsd.org/i386.html and I saw that IBM xSeries 3550 were listed a
few times.
I am also looking to buy a U1 server, and I'm looking at either IBM xSeries
3550 or a Dell PowerEdge 1950. Anyone has any experience with these
Intel 82801GB USB
rev 0x01: irq 11
ehci0: timed out waiting for BIOS
usb0 at ehci0: USB revision 2.0
Does anyone know what the problem is? Are some of the
hardware aren't supported by OpenBSD? What should I do
so this machine can run OpenBSD?
Thanks for the help. I appreciate it.
-Reza
Tired
thanks alot. I've created a new rulesets for my pf.conf, and it improves so
much. :)
On Thu, 27 Sep 2007 06:04:49 +0100, Stuart Henderson [EMAIL PROTECTED] wrote:
On 2007/09/27 11:51, Reza Muhammad wrote:
On Wed, 26 Sep 2007 11:37:28 -0700, Can E. Acar
[EMAIL PROTECTED]
wrote:
Reza
to the Internet directly from my laptop, the connection
is fine. Would a tcpdump log be
any helpful at this point?
Thanks for replying though.
On Wed, 26 Sep 2007 15:55:21 +0200, knitti [EMAIL PROTECTED] wrote:
On 9/22/07, Reza Muhammad [EMAIL PROTECTED] wrote:
I'm having a problem with my Internet
coming in from 192.168.*.*
aren't from my local network.
On Wed, 26 Sep 2007 17:19:05 +0100, Stuart Henderson [EMAIL PROTECTED] wrote:
On 2007/09/26 22:32, Reza Muhammad wrote:
Would a tcpdump log be any helpful at this point?
maybe; try ifconfig pfsync0 create and tcpdump -nipfsync0 -vvs1000
On Wed, 26 Sep 2007 11:37:28 -0700, Can E. Acar [EMAIL PROTECTED]
wrote:
Reza Muhammad wrote:
...
also
There is a lot of external broadcast traffic they are probably the cause
of
the large number of state insertions/deletions. They are either a badly
designed
p2p/broadcast/whatever
Hi all,
I was just trying to setup an ntpd server for my home network so it could sync
with each other. So here's what I have in my /etc/ntpd.conf:
# $OpenBSD: ntpd.conf,v 1.7 2004/07/20 17:38:35 henning Exp $
# sample ntpd configuration file, see ntpd.conf(5)
# Addresses to listen on (ntpd
--- Stuart Henderson [EMAIL PROTECTED] wrote:
On 2007/01/28 19:56, Reza Muhammad wrote:
and few new install Mandriva2007 (linux kernel)
that
couldn not browse the web (the other protocol work
OK)
if the rules keep state in PF machine is
activated.
use 'flags S/SA keep state
PF (OpenBSD-3.9) doesnt like Mandriva2007
Plese help
regards
Reza
Never Miss an Email
Stay connected with Yahoo! Mail on your mobile. Get started!
http://mobile.yahoo.com/services?promote=mail
surprised no one has asked this question before.
Oh, wait, me
checks the archives, oh, yeah, someone just
discussed that scenario
this week.
http://www.openbsd.org/faq/pf/pools.html#outgoing
Greg
What about -mpath in route(8) ??
is it doing ok now in 4.0 ?
regards
Reza
:11:2f:39:51:ae fxp0 1 flags=0
Can someone point me out where my problem is?
Thanks alot.
-Reza
Any questions? Get answers on any topic at www.Answers.yahoo.com. Try it now.
Hi guys,
I have an OpenBSD router at home and the clients are connected
through a wired interface (fxp0) as well as wireless interface (ral0
running in HostAP mode). Previously, wired network has a different
network then the wireless network, wired network has the address of
.
--- 192.168.1.3 ping statistics ---
5 packets transmitted, 0 received, 100% packet loss, time 4009ms
Hope this gives more idea on the problem
Thanks,
Reza
On Nov 22, 2006, at 9:47 PM, Michael wrote:
You probably don't have IP forwarding activated.
sysctl -w
)
if i only enabled altq on in one interface only (xl1
or xl2) , traffic limitation that i want is can be
done.
Is there something that can be done with ALTQ and PF
or my rule is bad ???
please.
Reza
.
Is there something wrong with this rule set to
acompilished my need ?
Please help..
regards
Reza
Access over 1 million songs - Yahoo! Music Unlimited
(http://music.yahoo.com/unlimited)
172.16.0.228 port 44408 connected with
128.6.231.102 port
5001
[ 3] 0.0-16.1 sec 48.0 KBytes 24.4 Kbits/sec
I'm expecting that iperf report it equal with the
bandwidth that i assign to (me) queue pipe.
Is there any thing wrong or i missed something here
???
Please help me
regards
Reza
Tired
in /usr/src/usr.sbin.
*** Error code 1
Stop in /usr/src (line 73 of Makefile).
Can anyone help me with it?
Thanks for the help.
-Reza
?
If there's anymore info needed, please let me know.
Thanks in advance,
Reza
ral0: device timeout
kernel: integer divide fault trap, code=0
Stopped at ral_setup_tx_desc+0xae: idivl %ebx,%eax
ddb trace
ral_setup_tx_desc(d0c89000, e6c38000,200,5fc,0) at ral_setup_tx_desc
+0xae
ral_tx_data
package repository and link
to /usr/bin/gcc.. is that correct move ?
One more.. how should i do to change to securelevel=0
? i change it via rc.securelevel but have no luck..
I need securelevel=0 so my sea.c can work..
any help apprc.
regards
reza
Tired of spam? Yahoo! Mail has the best spam
--- Jens Teglhus Mxller [EMAIL PROTECTED] wrote:
On Wed, December 21, 2005 12:06, Reza Muhammad said:
Dear All
C Compiler cannot create executable ?
what does it mean ?
My system is OpenBSD-3.8 Generic Kernel at Intel
Pentium M Proc 1600 Mhz (IBM Think Pad T41)
Please help
Thanks for the help. I guess I'll have to check the store myself.
It'll be too risky buying online. If I still can't get it right, I
might as well order from kd85.
Thanks again :)
When I bought mine the version was on the box. It's not obvious, but
it's located on a small sticker along with
.
Please be advice.
regards
reza
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
dear All,
In which file should i put my static route entry ?
regards
reza
Start your day with Yahoo! - make it your home page
http://www.yahoo.com/r/hs
Dear All,
Is there any trick to optimize squid in OpenBSD ?
please give me hint.
regards
reza
Sell on Yahoo! Auctions no fees. Bid on great items.
http://auctions.yahoo.com/
30 matches
Mail list logo