Re: "athn0: could not load firmware" for AR9271

2017-10-15 Thread Mihai Popescu
> There's a problem where this chip does not get enough juice from the USB host > >controller in some cases. I have tested it, feeding +5Vcc from the computer power supply, it is not about "juice". I had the same problem on the SB700. I bet it is another hw bug masked of by software.

Re: "athn0: could not load firmware" for AR9271

2017-10-15 Thread Steve Williams
Hi, Another data point..(sorry to top post... but felt it's appropriate) I've got APU as well.  Running OpenBSD 6.1: OpenBSD 6.1 (GENERIC.MP) #24: Wed Oct  4 18:47:09 CEST 2017 rob...@syspatch-61-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP # dmesg | grep athn athn0 at pci4 dev

Re: "athn0: could not load firmware" for AR9271

2017-10-15 Thread Stefan Sperling
On Sat, Oct 14, 2017 at 11:59:11AM -0400, Tim Stewart wrote: > Maximilian Pichler writes: > > > The dmesg is the same as previously (this is on the APU), except for: > > athn0 at pci5 dev 0 function 0 "Atheros AR9281" rev 0x01: apic 2 int 16 > > athn0: AR9280 rev 2

Re: "athn0: could not load firmware" for AR9271

2017-10-14 Thread Tim Stewart
Maximilian Pichler writes: > The dmesg is the same as previously (this is on the APU), except for: > athn0 at pci5 dev 0 function 0 "Atheros AR9281" rev 0x01: apic 2 int 16 > athn0: AR9280 rev 2 (2T2R), ROM rev 22, address xx:xx:xx:xx:xx:e2 I'm debugging some issues

Re: "athn0: could not load firmware" for AR9271

2017-05-28 Thread Maximilian Pichler
Thanks a lot for sharing the details! By the way, there seems to be an issue with the test results I sent because dd sometimes copied fewer bytes than intended. I'll try to pin it down and either update this thread or open a new one.

Re: "athn0: could not load firmware" for AR9271

2017-05-28 Thread Stefan Sperling
On Sat, May 27, 2017 at 08:31:23PM -0400, Maximilian Pichler wrote: > I've tried a PPD-AR5BHB92-H (AR9280 miniPCIe) in AP mode and connected > clients get ~12 Mbit/s downstream and ~35 Mbit/s upstream (i.e. the > card appears to receive data much faster than it sends). Selecting a > less crowded

Re: "athn0: could not load firmware" for AR9271

2017-05-27 Thread Maximilian Pichler
On Sat, May 27, 2017 at 11:03 AM, Stefan Sperling wrote: > The ATI SB700 is known to suffer from this issue. Good to know, thanks. > Get a 9280 miniPCIe. Pcengines sells them as "wle200nx". > A list of similar products can be found on wikidevi: >

Re: "athn0: could not load firmware" for AR9271

2017-05-27 Thread Stefan Sperling
On Sat, May 27, 2017 at 10:51:08AM -0400, Maximilian Pichler wrote: > On Sat, May 27, 2017 at 4:05 AM, Stefan Sperling wrote: > > What is the model of your USB host controller? (please always send a > > complete dmesg in problem reports -- you cannot guess exactly what people > >

Re: "athn0: could not load firmware" for AR9271

2017-05-27 Thread Maximilian Pichler
On Sat, May 27, 2017 at 4:05 AM, Stefan Sperling wrote: > What is the model of your USB host controller? (please always send a > complete dmesg in problem reports -- you cannot guess exactly what people > will want to know about your machine, so by sending a complete dmesg >

Re: "athn0: could not load firmware" for AR9271

2017-05-27 Thread Stefan Sperling
On Fri, May 26, 2017 at 08:39:14PM -0400, Maximilian Pichler wrote: > I'm trying to use an Olimex MOD-WIFI-AR9271-ANT USB wireless adapter, but: > # dmesg > OpenBSD 6.1 (GENERIC.MP) #20: Sat Apr 1 13:45:56 MDT 2017 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > [...]

"athn0: could not load firmware" for AR9271

2017-05-26 Thread Maximilian Pichler
Hi, I'm trying to use an Olimex MOD-WIFI-AR9271-ANT USB wireless adapter, but: # dmesg OpenBSD 6.1 (GENERIC.MP) #20: Sat Apr 1 13:45:56 MDT 2017 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP [...] athn0 at uhub0 port 5 configuration 1 interface 0 "ATHEROS UB93" rev