Hi,
I've installed OpenBSD 3.7 on iBook 300 from official CD.
But in booting and Xorg, I get below messages.
method <backlight-off> not found; ihandle=ffbc9600 phandle=ff93b470
method <backlight-on> not found; ihandle=ffbc9600 phandle=ff93b470
method <set-contrast> not found; ihandle=ffbc9600 phandle=ff93b470
I want to control backlight and contrast.
Has anyone got any advice?
I use GENERIC kernel. Dmesg output is below.
[ using 308668 bytes of bsd ELF symbol table ]
console out [ATY,RageM_Lp]console in [keyboard] ADB found
: memaddr 91000000 size 1000000, : consaddr 91000000, : ioaddr 90020000, size
20000: memtag 8000, iotag 8000: width 800 linebytes 800 height 600 depth 8
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2005 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 3.7 (GENERIC) #225: Sun Mar 20 00:55:39 MST 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/macppc/compile/GENERIC
real mem = 100663296 (98304K)
avail mem = 81424384 (79516K)
using 1228 buffers containing 5029888 bytes of memory
mainbus0 (root)
cpu0 at mainbus0: 750 (Revision 0x8300): 299 MHz: 512KB backside cache
memc0 at mainbus0: uni-n
mpcpcibr0 at mainbus0: uni-north, Revision 0xff
pci0 at mpcpcibr0 bus 0
pchb0 at pci0 dev 11 function 0 "Apple Uni-N AGP" rev 0x00
vgafb0 at pci0 dev 16 function 0 "ATI Mach64 LN" rev 0x64, mmio
wsdisplay0 at vgafb0: console (std, vt100 emulation)
mpcpcibr1 at mainbus0: uni-north, Revision 0x0
pci1 at mpcpcibr1 bus 0
pchb1 at pci1 dev 11 function 0 "Apple Uni-N" rev 0x00
macobio0 at pci1 dev 23 function 0 "Apple Keylargo" rev 0x02
openpic0 at macobio0: version 0x4614
gpio_obio0 at macobio0
gpio_obio1 at gpio_obio0 irq 47
programmer-switch at gpio_obio0 not configured
extint-gpio12 at gpio_obio0 not configured
zsc0 at macobio0: irq 22,50
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
adb0 at macobio0 irq 25: via-pmu 3 targets
aed0 at adb0 addr 0: ADB Event device
akbd0 at adb0 addr 2: PowerBook G3 keyboard (Japanese layout)
wskbd0 at akbd0 (mux 1 ignored for console): console keyboard, using wsdisplay0
ams0 at adb0 addr 3: EMP trackpad <tpad> 2-button, 400 dpi
wsmouse0 at ams0 mux 0
abtn0 at adb0 addr 7: brightness/volume/eject buttons
apm0 at adb0: battery flags 0x7, 100% charged
ki2c0 at macobio0
wdc0 at macobio0 irq 19: DMA
wd0 at wdc0 channel 0 drive 0: <IBM-DBCA-203240>
wd0: 16-sector PIO, LBA, 3102MB, 6354432 sectors
wd0(wdc0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
wdc1 at macobio0 irq 20: DMA
atapiscsi0 at wdc1 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, CD-ROM CR-175, 5AAE> SCSI0 5/cdrom
removable
cd0(wdc1:0:0): using BIOS timings, DMA mode 2
wdc2 at macobio0 irq 21: DMA
ohci0 at pci1 dev 24 function 0 "Apple USB" rev 0x00: irq 27, version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Apple OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1 at pci1 dev 25 function 0 "Apple USB" rev 0x00: irq 0, version 1.0
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Apple OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
mpcpcibr2 at mainbus0: uni-north, Revision 0x16
pci2 at mpcpcibr2 bus 0
pchb2 at pci2 dev 11 function 0 "Apple Uni-N Eth" rev 0x00
gem0 at pci2 dev 15 function 0 "Apple GMAC" rev 0x00: irq 41, address
00:0a:27:97:43:72
bmtphy0 at gem0 phy 0: BCM5201 10/100 PHY, rev. 2
bootpath: '/[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL
PROTECTED]/bsd'
boot device: wd0.
root on wd0a
rootdev=0x0 rrootdev=0xb00 rawdev=0xb02
Best Regards.
--
Tochy
