Re: Intel 6300ESB SATA

2005-10-24 Thread Alexander Yurchenko
On Sun, Oct 23, 2005 at 05:15:29PM -0600, S?bastien Taylor wrote: I am having problems having two SATA disks recognized by OpenBSD, the 6300ESB controller is found and seems to be configured properly but I get the error: pciide2: couldn't map channel 0 cmd regs pciide2: couldn't map

Re: Intel 6300ESB SATA

2005-10-24 Thread Sébastien Taylor
That did the trick, thank you. The BIOS has three modes for the SATA, I picked the SATA Legacy mode which claims to only support two SATA drives from the original SATA Enhanced mode which claims to support two SATA drives plus another four PATA drives. I forget what the third mode was and

Re: Intel 6300ESB SATA

2005-10-24 Thread Sébastien Taylor
With this patch applied (and the pci interrupt router patch from Brad) The system locks up after finding wd1 which is the first sata drive on the 6300ESB. I don't have a dmesg handy right now, but if you'd like it I can get it for you, but like you mentioned in another email, Alexander's

Re: Intel 6300ESB SATA

2005-10-24 Thread Nick Nauwelaerts
On Mon, 24 Oct 2005 10:25:07 -0600 Sibastien Taylor [EMAIL PROTECTED] wrote: I do have one question about the following lines though: dkcsum: wd0 matches BIOS drive 0x80 wd1: no disk label dkcsum: wd1 matches BIOS drive 0x81 dkcsum: wd1 matches BIOS drive 0x82 IGNORED wd2: no disk label

Re: Intel 6300ESB SATA

2005-10-23 Thread Jonathan Gray
On Sun, Oct 23, 2005 at 05:15:29PM -0600, Sibastien Taylor wrote: I am having problems having two SATA disks recognized by OpenBSD, the 6300ESB controller is found and seems to be configured properly but I get the error: pciide2: couldn't map channel 0 cmd regs pciide2: couldn't map