Re: OpenBSD 6.5 dumps to debugger when using ifconfig bridge command

2019-06-05 Thread Russell Sutherland
From: owner-m...@openbsd.org on behalf of Hrvoje Popovski Sent: Wednesday, June 5, 2019 05:59 To: misc@openbsd.org Subject: Re: OpenBSD 6.5 dumps to debugger when using ifconfig bridge command On 4.6.2019. 21:22, Russell Sutherland wrote: > I tried loading current on the device and the s

Re: OpenBSD 6.5 dumps to debugger when using ifconfig bridge command

2019-06-05 Thread Hrvoje Popovski
On 4.6.2019. 21:22, Russell Sutherland wrote: > I tried loading current on the device and the same result: > > OpenBSD 6.5-current (GENERIC.MP) #5: Mon Jun 3 07:46:49 MDT 2019 > > # netstat -in > NameMtu Network Address Ipkts IfailOpkts Ofail > Colls > lo0 32768

Re: OpenBSD 6.5 dumps to debugger when using ifconfig bridge command

2019-06-04 Thread Russell Sutherland
nto    Fax:   +1.416.978.6620 Toronto, ON  M5S 1C1   From: owner-m...@openbsd.org on behalf of Stuart Henderson Sent: Tuesday, June 4, 2019 13:53 To: misc@openbsd.org Subject: Re: OpenBSD 6.5 dumps to debugger when using ifconfig bridge command   >There was a crash fixed in br

Re: OpenBSD 6.5 dumps to debugger when using ifconfig bridge command

2019-06-04 Thread Stuart Henderson
There was a crash fixed in bridge(4) a few weeks ago, can you try reproducing on -current? On 2019-06-04, Lee Nelson wrote: > I have twice seen kernel panics in the same situation. It drops to "ddb>" > but the system is unresponsive. Unfortunately, other than taking a picture > of the screen

Re: OpenBSD 6.5 dumps to debugger when using ifconfig bridge command

2019-06-04 Thread Lee Nelson
I have twice seen kernel panics in the same situation. It drops to "ddb>" but the system is unresponsive. Unfortunately, other than taking a picture of the screen with my cellphone, I do not have any further information from the system. On both occasions, I was issuing "ifconfig bridge42" without

Re: OpenBSD 6.5 dumps to debugger when using ifconfig bridge command

2019-06-04 Thread Tom Smyth
Hi Russell I had this issue when bridging vio() interfaces in kvm / proxmox ... but not with em() interfaces can you try with a uni-processor kernel ... to see does it crash / dump ? mpi@ had asked me to enable witness in the kernel and send the output of the dumps (I haven't gotten around

OpenBSD 6.5 dumps to debugger when using ifconfig bridge command

2019-06-04 Thread Russell Sutherland
I began to install resflash (https://stable.rcesoftware.com/resflash/) which is based on OpenBSD) to build a small firewall on an PC Engines apu2 board. Three interfaces, two bridged and one with an IP for management. I found the system would crash and drop down to the debugger interface