Not sure if it's related to the arch (amd64), but have a variant
compared to what the author of this thread posted.
ath0 at pci4 dev 0 function 0 "Atheros AR5424" rev 0x01: apic 2 int 19
ath0: AR5424 14.2 phy 7.0 rf 0.0, WOR4W, address 00:1b:9e:3a:bb:18
Prior to the Jun12 snap there were 5 lines
On Fri, Jun 13, 2014 at 09:44:02AM -0700, Bryan Irvine wrote:
> You may want to start by posting a dmesg to the list.
>
>
As I have been advised to attach a complete dmesg ouptut, I'm sending
this again. Here it's the complete trace:
OpenBSD 5.5-current (GENERIC) #164: Wed Jun 11 13:11:27 MDT 2
On Sat, Jun 14, 2014 at 11:13:13AM +0200, lm wrote:
> Here are the relevant lines from dmesg, those referring to ath0:
>
> ath0 at pci3 dev 0 function 0 "Atheros AR5424" rev 0x01: apic 1 int 18
> ath0: AR5424 14.2 phy 7.0 rf 0.0, WOR0W, address 00:15:af:b3:bc:26
> ath0: unable to reset hardware; h
On Fri, Jun 13, 2014 at 09:44:02AM -0700, Bryan Irvine wrote:
> You may want to start by posting a dmesg to the list.
>
Here are the relevant lines from dmesg, those referring to ath0:
ath0 at pci3 dev 0 function 0 "Atheros AR5424" rev 0x01: apic 1 int 18
ath0: AR5424 14.2 phy 7.0 rf 0.0, WOR0W,
Hello,
Apologies to the list if I (likely) bung up this reply.
Have the AR5424 here too, but on a circa 2007 Toshiba Satellite A215.
My abilities are limited to applying patches and reporting the
results, but willing to test also.
>From using this on Winders and Ubuntu, can pass on that this chi
On 2014-06-13, lm wrote:
> It seems it's supported on NetBSD (or, at least, they claim that on
> ath(4)).
It probably is, that nic works on most OS.
> The thing is, is there anybody in the room that knows why this driver
> didn't succeed in the past? Is there any tip you want to share before
> I
On Fri, Jun 13, 2014 at 08:53:37AM BST, lm wrote:
> Hi there,
> this is my first mail to the mailing list, so hello everybody!
Hello.
> The thing is, is there anybody in the room that knows why this driver
> didn't succeed in the past? Is there any tip you want to share before
> I start working
Hi there,
this is my first mail to the mailing list, so hello everybody!
I have been using OpenBSD as a server during the last two years, and
I finally decided to move it to one of my laptops. I started with
an EeePC 701, and almost everything is working smoothly, but the
Wireless Card doesn't
8 matches
Mail list logo
