I4ve installed OpenBSD3.7 on a i386box (asus mainboard + celeron processor) When I put the commands: reboot or shutdown -r the machine flush the disk (the normal operation) and then stand on the message "Rebooting..." and... *surprise* it wont reboots... :-(
here is my dmesg (fresh install OpenBSD3.7 -release GENERIC default kernel) ---------------------- cut --------------------------- OpenBSD 3.7 (GENERIC) #50: Sun Mar 20 00:01:57 MST 2005 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Celeron(R) CPU 2.40GHz ("GenuineIntel" 686-class) 2.40 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,PNI, MWAIT,CNXT-ID real mem = 258777088 (252712K) avail mem = 229367808 (223992K) using 3184 buffers containing 13041664 bytes (12736K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(00) BIOS, date 01/10/05, BIOS32 rev. 0 @ 0xf0010 apm0 at bios0: Power Management spec V1.2 apm0: AC on, battery charge unknown pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf5f60/144 (7 entries) pcibios0: no compatible PCI ICU found: ICU vendor 0x1106 product 0x3177 pcibios0: Warning, unable to fix up PCI interrupt routing pcibios0: PCI bus #1 is the last bus bios0: ROM list: 0xc0000/0xc000 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "VIA VT8751 PCI" rev 0x00 ppb0 at pci0 dev 1 function 0 "VIA VT8633 AGP" rev 0x00 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "S3 ProSavage DDR" rev 0x00 wsdisplay0 at vga1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) rl0 at pci0 dev 9 function 0 "Realtek 8139" rev 0x10: irq 5 address 00:08:54:17:5d:13 rlphy0 at rl0 phy 0: RTL internal phy rl1 at pci0 dev 10 function 0 "Realtek 8139" rev 0x10: irq 10 address 00:08:54:17:5d:a0 rlphy1 at rl1 phy 0: RTL internal phy rl2 at pci0 dev 11 function 0 "Realtek 8139" rev 0x10: irq 3 address 00:08:54:17:5d:a2 rlphy2 at rl2 phy 0: RTL internal phy uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x80: irq 11 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x80: irq 5 usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x80: irq 10 usb2 at uhci2: USB revision 1.0 uhub2 at usb2 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pcib0 at pci0 dev 17 function 0 "VIA VT8235 ISA" rev 0x00 pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel 0 configured to compatibility, channel 1 config ured to compatibility wd0 at pciide0 channel 0 drive 0: <SAMSUNG SP0411N> wd0: 16-sector PIO, LBA48, 38204MB, 78242976 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 pciide0: channel 1 disabled (no drives) isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> sysbeep0 at pcppi0 lm0 at isa0 port 0x290/8: W83697HF npx0 at isa0 port 0xf0/16: using exception 16 biomask eff5 netmask effd ttymask ffff pctr: user-level cycle counter enabled dkcsum: wd0 matched BIOS disk 80 root on wd0a rootdev=0x0 rrootdev=0x300 rawdev=0x302 -------------------------- cut ----------------------------- -- Diego Augusto Dalmolin (41) 9648-0882