Hello, misc. I have this server to play for a while: IBM x346 (8840-2BG, 2xXeon 3.2GHz/2048MB RAM) with ServeRAID 7k controller onboard (equipped with BBU it is really fast - checked in Windows). Print on chip says that it is Adaptec AIC-7902W.
I tried to install 3.8-release and it said in dmesg: pci7 at ppb6 bus 7 vendor "Adaptec", unknown product 0x0250 (class mass storage subclass RAID, rev 0x07) at pci7 dev 14 function 0 not configured (full dmesg follows) I googled, searched the archives. Archive gave me some hope: http://marc.theaimsgroup.com/?l=openbsd-misc&m=110442962406184&w=2 and http://marc.theaimsgroup.com/?l=openbsd-misc&m=110443016613879&w=2 Then I downloaded snapshot (20 Jan 2006) and tried to install it. dmesg said: pci7 at ppb6 bus 7 "Adaptec ServeRAID" rev 0x07 at pci7 dev 14 function 0 not configured (full dmesg follows) Then I tried to boot with bsd.mp from that snapshot (just because it shows more information in dmesg). Same: pci7 at ppb6 bus 7 "Adaptec ServeRAID" rev 0x07 at pci7 dev 14 function 0 not configured (full dmesg follows) ServeRAID says in it's BIOS: Vendor: 0x9005 Device: 0x0250 SSysVen: 0x1014 SSysDev: 0x028E Firmware version 7.0.23. Is there any chance to get it to work with OpenBSD or should I give up for now? Thanks for your attention. -- Yuri Spirin mailto:[EMAIL PROTECTED] OpenBSD 3.8 (RAMDISK_CD) #794: Sat Sep 10 15:58:32 MDT 2005 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD cpu0: Intel(R) Xeon(TM) CPU 3.20GHz ("GenuineIntel" 686-class) 3.20 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT, PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,CNXT-ID real mem = 2146844672 (2096528K) avail mem = 1953976320 (1908180K) using 4278 buffers containing 107446272 bytes (104928K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(00) BIOS, date 02/16/05, BIOS32 rev. 0 @ 0xfd6d1 pcibios0 at bios0: rev 2.1 @ 0xf0000/0xffff pcibios0: PCI BIOS has 18 Interrupt Routing table entries pcibios0: PCI Exclusive IRQs: 9 10 11 15 pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801EB/ER LPC" rev 0x00) pcibios0: PCI bus #9 is the last bus bios0: ROM list: 0xc0000/0xb000 0xcb000/0x1800 0xcc800/0x1800 0xce000/0x3400 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel E7710 SMCH" rev 0x0c "Intel E7710 MCH ERR" rev 0x0c at pci0 dev 0 function 1 not configured ppb0 at pci0 dev 2 function 0 "Intel E7710 MCH PCIE" rev 0x0c pci1 at ppb0 bus 1 ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09 pci2 at ppb1 bus 2 ppb2 at pci1 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09 pci3 at ppb2 bus 3 ppb3 at pci0 dev 4 function 0 "Intel E7710 MCH PCIE" rev 0x0c pci4 at ppb3 bus 4 bge0 at pci4 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101): irq 3 address 00:11:25:8c:74:44 brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 ppb4 at pci0 dev 5 function 0 "Intel E7710 MCH PCIE" rev 0x0c pci5 at ppb4 bus 5 bge1 at pci5 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101): irq 3 address 00:11:25:8c:74:45 brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 ppb5 at pci0 dev 6 function 0 "Intel E7710 MCH PCIE" rev 0x0c pci6 at ppb5 bus 6 ppb6 at pci6 dev 0 function 0 "Intel IOP331 Channel 0" rev 0x07 pci7 at ppb6 bus 7 vendor "Adaptec", unknown product 0x0250 (class mass storage subclass RAID, rev 0x07) at pci7 dev 14 function 0 not configured ppb7 at pci6 dev 0 function 2 "Intel IOP331 Channel 1" rev 0x07 pci8 at ppb7 bus 8 vendor "Intel", unknown product 0x359b (class system subclass miscellaneous, rev 0x0c) at pci0 dev 8 function 0 not configured uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: irq 3 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: irq 5 usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB" rev 0x02: irq 7 usb2 at ehci0: USB revision 2.0 uhub2 at usb2 uhub2: Intel EHCI root hub, rev 2.00/1.00, addr 1 uhub2: 4 ports with 4 removable, self powered ppb8 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2 pci9 at ppb8 bus 9 vga1 at pci9 dev 6 function 0 "ATI Radeon VE QY" rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02 pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-ROM GDR8082N, 0L03> SCSI0 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 ignored (disabled) "Intel 82801EB/ER SMBus" rev 0x02 at pci0 dev 31 function 3 not configured isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec biomask ffed netmask ffed ttymask ffef rd0: fixed, 3800 blocks root on rd0a rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02 ---------- dmesg from 3.9 snapshot (bsd.rd): OpenBSD 3.9-beta (RAMDISK_CD) #999: Wed Jan 18 22:35:48 MST 2006 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD cpu0: Intel(R) Xeon(TM) CPU 3.20GHz ("GenuineIntel" 686-class) 3.20 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV, PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,CNXT-ID real mem = 2146844672 (2096528K) avail mem = 1953996800 (1908200K) using 4278 buffers containing 107446272 bytes (104928K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(00) BIOS, date 02/16/05, BIOS32 rev. 0 @ 0xfd6d1 pcibios0 at bios0: rev 2.1 @ 0xf0000/0xffff pcibios0: PCI BIOS has 18 Interrupt Routing table entries pcibios0: PCI Exclusive IRQs: 9 10 11 15 pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801EB/ER LPC" rev 0x00) pcibios0: PCI bus #9 is the last bus bios0: ROM list: 0xc0000/0xb000 0xcb000/0x1800 0xcc800/0x1800 0xce000/0x3400 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel E7520 MCH" rev 0x0c "Intel E7520 MCH ERR" rev 0x0c at pci0 dev 0 function 1 not configured ppb0 at pci0 dev 2 function 0 "Intel MCH PCIE" rev 0x0c pci1 at ppb0 bus 1 ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09 pci2 at ppb1 bus 2 ppb2 at pci1 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09 pci3 at ppb2 bus 3 ppb3 at pci0 dev 4 function 0 "Intel MCH PCIE" rev 0x0c pci4 at ppb3 bus 4 bge0 at pci4 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101): irq 3, address 00:11:25:8c:74:44 brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 ppb4 at pci0 dev 5 function 0 "Intel MCH PCIE" rev 0x0c pci5 at ppb4 bus 5 bge1 at pci5 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101): irq 3, address 00:11:25:8c:74:45 brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 ppb5 at pci0 dev 6 function 0 "Intel MCH PCIE" rev 0x0c pci6 at ppb5 bus 6 ppb6 at pci6 dev 0 function 0 "Intel IOP331 Channel 0" rev 0x07 pci7 at ppb6 bus 7 "Adaptec ServeRAID" rev 0x07 at pci7 dev 14 function 0 not configured ppb7 at pci6 dev 0 function 2 "Intel IOP331 Channel 1" rev 0x07 pci8 at ppb7 bus 8 "Intel E7525 MCH Configuration" rev 0x0c at pci0 dev 8 function 0 not configured uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: irq 3 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: irq 5 usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: irq 7 usb2 at ehci0: USB revision 2.0 uhub2 at usb2 uhub2: Intel EHCI root hub, rev 2.00/1.00, addr 1 uhub2: 4 ports with 4 removable, self powered ppb8 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2 pci9 at ppb8 bus 9 vga1 at pci9 dev 6 function 0 "ATI Radeon VE QY" rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02 pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-ROM GDR8082N, 0L03> SCSI0 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 ignored (disabled) "Intel 82801EB/ER SMBus" rev 0x02 at pci0 dev 31 function 3 not configured isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec biomask ffed netmask ffed ttymask ffef rd0: fixed, 3800 blocks root on rd0a rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02 ------------- dmesg from 3.9-snapshot (bsd.mp): boot> boot /3.9/i386/bsd.mp booting cd0a:/3.9/i386/bsd.mp:=0x613988 entry point at 0x100120*{ [ using 497240 bytes of bsd ELF symbol table ] Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2006 OpenBSD. All rights reserved. http://www.OpenBSD.org OpenBSD 3.9-beta (GENERIC.MP) #572: Wed Jan 18 22:29:01 MST 2006 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP cpu0: Intel(R) Xeon(TM) CPU 3.20GHz ("GenuineIntel" 686-class) 3.20 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV, PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,CNXT-ID real mem = 2146844672 (2096528K) avail mem = 1952792576 (1907024K) using 4278 buffers containing 107446272 bytes (104928K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(00) BIOS, date 02/16/05, BIOS32 rev. 0 @ 0xfd6d1 pcibios0 at bios0: rev 2.1 @ 0xf0000/0xffff pcibios0: PCI BIOS has 18 Interrupt Routing table entries pcibios0: PCI Exclusive IRQs: 9 10 11 15 pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801EB/ER LPC" rev 0x00) pcibios0: PCI bus #9 is the last bus bios0: ROM list: 0xc0000/0xb000 0xcb000/0x3400 ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca8/8 spacing 4 mainbus0: Intel MP Specification (Version 1.4) (IBM ENSW x346 SMP ) cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 200 MHz cpu1 at mainbus0: apid 6 (application processor) cpu1: Intel(R) Xeon(TM) CPU 3.20GHz ("GenuineIntel" 686-class) cpu1: FPU,CX8,APIC,SSE3,MWAIT,CNXT-ID mainbus0: bus 0 is type PCI mainbus0: bus 1 is type PCI mainbus0: bus 2 is type PCI mainbus0: bus 3 is type PCI mainbus0: bus 4 is type PCI mainbus0: bus 5 is type PCI mainbus0: bus 6 is type PCI mainbus0: bus 7 is type PCI mainbus0: bus 8 is type PCI mainbus0: bus 9 is type PCI mainbus0: bus 10 is type ISA ioapic0 at mainbus0: apid 14 pa 0xfec00000, version 20, 24 pins ioapic1 at mainbus0: apid 13 pa 0xfec84000, version 20, 24 pins ioapic2 at mainbus0: apid 12 pa 0xfec84400, version 20, 24 pins ioapic3 at mainbus0: apid 11 pa 0xfec80000, version 20, 24 pins ioapic4 at mainbus0: apid 10 pa 0xfec80400, version 20, 24 pins pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel E7520 MCH" rev 0x0c "Intel E7520 MCH ERR" rev 0x0c at pci0 dev 0 function 1 not configured ppb0 at pci0 dev 2 function 0 "Intel MCH PCIE" rev 0x0c pci1 at ppb0 bus 1 ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09 pci2 at ppb1 bus 2 ppb2 at pci1 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09 pci3 at ppb2 bus 3 ppb3 at pci0 dev 4 function 0 "Intel MCH PCIE" rev 0x0c pci4 at ppb3 bus 4 bge0 at pci4 dev 0 function 0 "Broadcom BCM5721" rev 0x11pci_intr_map: bus 4 dev 0 func 0 pin 1; line 3 pci_intr_map: no MP mapping found , BCM5750 B1 (0x4101): irq 3, address 00:11:25:8c:74:44 brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 ppb4 at pci0 dev 5 function 0 "Intel MCH PCIE" rev 0x0c pci5 at ppb4 bus 5 bge1 at pci5 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101): apic 14 int 16 (irq 3), address 00:11:25:8c:74:45 brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 ppb5 at pci0 dev 6 function 0 "Intel MCH PCIE" rev 0x0c pci6 at ppb5 bus 6 ppb6 at pci6 dev 0 function 0 "Intel IOP331 Channel 0" rev 0x07 pci7 at ppb6 bus 7 "Adaptec ServeRAID" rev 0x07 at pci7 dev 14 function 0 not configured ppb7 at pci6 dev 0 function 2 "Intel IOP331 Channel 1" rev 0x07 pci8 at ppb7 bus 8 "Intel E7525 MCH Configuration" rev 0x0c at pci0 dev 8 function 0 not configured uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: apic 14 int 16 (irq 3) usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: apic 14 int 19 (irq 5) usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: apic 14 int 23 (irq 7) usb2 at ehci0: USB revision 2.0 uhub2 at usb2 uhub2: Intel EHCI root hub, rev 2.00/1.00, addr 1 uhub2: 4 ports with 4 removable, self powered ppb8 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2 pci9 at ppb8 bus 9 vga1 at pci9 dev 6 function 0 "ATI Radeon VE QY" rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02 pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-ROM GDR8082N, 0L03> SCSI0 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 ignored (disabled) ichiic0 at pci0 dev 31 function 3 "Intel 82801EB/ER SMBus" rev 0x02: apic 14 int 17 (irq 11) iic0 at ichiic0 isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pmsi0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pmsi0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 sysbeep0 at pcppi0 npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom0: console fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec biomask 0 netmask 0 ttymask 0 ioapic0: pin 16 shares different IPL interrupts (40..50), degraded performance pctr: user-level cycle counter enabled root on wd15a rootdev=0xf0 rrootdev=0x3f0 rawdev=0x3f2 panic: cannot open disk, 0xf0/0x3f0, error 6 Stopped at Debugger+0x4: leave RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC! DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION! ddb{0}> trace Debugger(0,d02244c6,8,90,3f2) at Debugger+0x4 panic(d05203e0,f0,3f0,6,1) at panic+0x63 dk_mountroot(ffffffff,0,d0716fa0,d020f4fb,7ffcd000) at dk_mountroot+0x19b vfs_mountroot(7ffcd000,8f6007ff,d060,0,0) at vfs_mountroot+0x51 main(0,0,0,0,0) at main+0x477 ddb{0}> ps PID PPID PGRP UID S FLAGS WAIT COMMAND 8 0 0 0 3 0x2100204 pftm pfpurge 7 0 0 0 3 0x2100204 usbevt usb2 6 0 0 0 3 0x2100204 usbevt usb1 5 0 0 0 3 0x2100204 usbtsk usbtask 4 0 0 0 3 0x2100204 usbevt usb0 3 0 0 0 2 0x2100204 ipmi0 2 0 0 0 3 0x2100204 kmalloc kmthread 1 0 0 0 3 0x2000004 initexec swapper * 0 -1 0 0 7 0x2080204 swapper