> Hi,
>
> My PCEngines APU died and I need to rebuild my router.
>
> I'm throwing together an old desktop, but ultimately I'd like to use a
> Raspberry Pi that I bought to play with.
>
> My network configuration needs 2 wired interfaces. I don't have a switch
> that will do vlans, and I don't
Hi.
I have old TP-Link UE300 (USB3.0 GigabitEthernet) and UE330 (USB3.0
GigabitEthernet + USB3.0 3-port hub).
Both work fine with Openbsd on Raspberry PI 4.
rtl8153 (driver ure)
200-250 mbit/s
Regards,
Roman
On 30.06.22 00:16, Steve Williams wrote:
Hi,
My PCEngines APU died and I need
Hi,
My PCEngines APU died and I need to rebuild my router.
I'm throwing together an old desktop, but ultimately I'd like to use a
Raspberry Pi that I bought to play with.
My network configuration needs 2 wired interfaces. I don't have a switch
that will do vlans, and I don't want to have to
This is a great suggestion. Thanks Stuart. Much appreciated
-b.
On Thu, Sep 27, 2018 at 14:57 Stuart Longland
wrote:
> On 25/09/18 10:00, Bogdan Kulbida wrote:
> > Please don’t judge that hard, but I’m trying to see if I can set-up a
> > network gateway with one of the old’ish servers I have
On 25/09/18 10:00, Bogdan Kulbida wrote:
> Please don’t judge that hard, but I’m trying to see if I can set-up a
> network gateway with one of the old’ish servers I have here. It was running
> OBSD just fine for a looong time but has only one network interface.
>
> It does have few extra USB
Thank you for your help. Much appreciated.
On Tue, Sep 25, 2018 at 03:35 Stephane HUC "PengouinBSD" <
b...@stephane-huc.net> wrote:
> Hi, Bogdan
>
> I'm using every day, the Wii USB Lan Ethernet Adapter RVL-015; it's
> managed by axe driver:
>
> $ dmesg | grep axe
>
> axe0 at uhub0 port 1
Hi, Bogdan
I'm using every day, the Wii USB Lan Ethernet Adapter RVL-015; it's
managed by axe driver:
$ dmesg | grep axe
axe0 at uhub0 port 1 configuration 1 interface 0 "ASIX Electronics
AX88772" rev 2.00/0.01 addr 2
axe0: AX88772, address 00:**:**:**:**:**
ukphy0 at axe0 phy 16: Generic IEEE
i...@konstankino.com (Bogdan Kulbida), 2018.09.25 (Tue) 02:00 (CEST):
> It does have few extra USB ports, ta-da...
> Anyway, what USB network interface would you recommend that would run
> smoothly with the OBSD 6.3?
Works for years already, not a single hickup that I know of:
axe0 at uhub0 port
Dear Community,
Please don’t judge that hard, but I’m trying to see if I can set-up a
network gateway with one of the old’ish servers I have here. It was running
OBSD just fine for a looong time but has only one network interface.
It does have few extra USB ports, ta-da...
Anyway, what USB
On my machine the Rankie USB ethernet adapter sometimes stops working,
usually after a period of inactivity. The following messages appear in
the log:
ure0: usb errors on rx: IOERROR
uhid0 detached
uhidev0 detached
ugen0 detached
sd1 detached
scsibus2 detached
umass0 detached
sd2 detached
Hi list,
I created a diff to add support to the adapter listed in the link below:
http://www.luizgustavo.pro.br/~lgcosta/jp1080/
Resume:
udav: vendor 0x0fe6, product: 0x9700
If someone can test it on other platforms.
i386 and amd64 functioning normally
thanks
--
/\ Luiz
On Fri, Jun 17, 2011 at 3:57 PM, Luiz Gustavo S. Costa
luizgust...@luizgustavo.pro.br wrote:
[demime 1.01d removed an attachment of type text/x-patch which had a name of
udav-9700.diff]
misc@ strips attachments: re-send your patch inline, please.
Ciao,
David
Thanks David.
diff -r 18f25adaa9dd dev/usb/if_udav.c
--- a/dev/usb/if_udav.c Fri Jun 17 10:39:30 2011 -0300
+++ b/dev/usb/if_udav.c Fri Jun 17 10:43:51 2011 -0300
@@ -167,7 +167,8 @@
{{ USB_VENDOR_SHANTOU, USB_PRODUCT_SHANTOU_ST268 }, 0 },
{{ USB_VENDOR_SHANTOU,
13 matches
Mail list logo