Hello.
On boot, or if I disconnect and reconnect the hub from my system,
devices connected to the hub are visible and work. If I remove
something, the kernel gives and error, as seen below in dmesg when I
removed a USB storage I got "umass0: BBB reset failed, IOERROR". If I
add a new device, it will get power but the kernel doesn't see it.
I have the same problem with two different external self powered USB
hubs, one generic, the second a Belkin, both with 7 ports.
What can be done to fix this?
Below is my dmesg and usbdevs -v. Near the end of the dmesg, I detached
a USB storage device, causing a bunch of messages, and the following day
I reconnected the USB hub to my system (I'm mentioning this to explain
the messages in the end of dmesg).
As well, I only have one USB hub attached. I don't know if it's normal
for one hub to get two devices... uhub4 and uhub5.
Thanks.
OpenBSD 5.3-beta (GENERIC.MP) #25: Fri Feb 1 16:29:00 MST 2013
t...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error 80<clock_battery>
real mem = 6167982080 (5882MB)
avail mem = 5981298688 (5704MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xe6fc0 (51 entries)
bios0: vendor Acer version "V2.14" date 07/27/2011
bios0: Acer Aspire 5552
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP HPET APIC MCFG BOOT SLIC SSDT
acpi0: wakeup devices PB2_(S5) PB3_(S4) PB4_(S5) PB5_(S5) PB6_(S5) PB7_(S5)
PB9_(S5) PB10(S5) SPB0(S4) SPB1(S4) GEC_(S4) USB0(S3) USB4(S3) P2P_(S5)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpihpet0 at acpi0: 14318180 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Phenom(tm) II N970 Quad-Core Processor, 2194.87 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,NODEID,ITSC
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu0: AMD erratum 721 detected and fixed
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD Phenom(tm) II N970 Quad-Core Processor, 2194.53 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,NODEID,ITSC
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu1: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu1: AMD erratum 721 detected and fixed
cpu2 at mainbus0: apid 2 (application processor)
cpu2: AMD Phenom(tm) II N970 Quad-Core Processor, 2194.53 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,NODEID,ITSC
cpu2: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache
cpu2: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu2: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu2: AMD erratum 721 detected and fixed
cpu3 at mainbus0: apid 3 (application processor)
cpu3: AMD Phenom(tm) II N970 Quad-Core Processor, 2194.53 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,NODEID,ITSC
cpu3: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache
cpu3: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu3: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu3: AMD erratum 721 detected and fixed
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 21, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 4
acpimcfg0 at acpi0 addr 0xf7000000, bus 0-15
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (AGP_)
acpiprt2 at acpi0: bus -1 (PB2_)
acpiprt3 at acpi0: bus -1 (PB3_)
acpiprt4 at acpi0: bus 2 (PB4_)
acpiprt5 at acpi0: bus 8 (PB5_)
acpiprt6 at acpi0: bus -1 (PB6_)
acpiprt7 at acpi0: bus -1 (PB7_)
acpiprt8 at acpi0: bus -1 (PB9_)
acpiprt9 at acpi0: bus -1 (PB10)
acpiprt10 at acpi0: bus -1 (SPB0)
acpiprt11 at acpi0: bus -1 (SPB1)
acpiprt12 at acpi0: bus 9 (P2P_)
acpiec0 at acpi0
acpicpu0 at acpi0: PSS
acpicpu1 at acpi0: PSS
acpicpu2 at acpi0: PSS
acpicpu3 at acpi0: PSS
acpitz0 at acpi0: critical temperature is 200 degC
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpibtn2 at acpi0: LID_
acpivideo0 at acpi0: VGA_
acpivout0 at acpivideo0: LCD_
acpivideo1 at acpi0: VGA_
acpivideo2 at acpi0: VGA_
cpu0: 2194 MHz: speeds: 2200 1900 1600 1300 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD RS880 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "AMD RS780 PCIE" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "ATI Mobility Radeon HD 4200" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
radeondrm0 at vga1: apic 4 int 18
drm0 at radeondrm0
azalia0 at pci1 dev 5 function 1 "ATI Radeon HD 4200 HD Audio" rev 0x00: msi
azalia0: no supported codecs
ppb1 at pci0 dev 4 function 0 "AMD RS780 PCIE" rev 0x00: msi
pci2 at ppb1 bus 2
bge0 at pci2 dev 0 function 0 "Broadcom BCM57780" rev 0x01, BCM57780 A1
(0x57780001): apic 4 int 16, address b8:70:f4:98:5d:3f
brgphy0 at bge0 phy 1: BCM57780 10/100/1000baseT PHY, rev. 1
ppb2 at pci0 dev 5 function 0 "AMD RS780 PCIE" rev 0x00: msi
pci3 at ppb2 bus 8
athn0 at pci3 dev 0 function 0 "Atheros AR9285" rev 0x01: apic 4 int 17
athn0: AR9285 rev 2 (1T1R), ROM rev 14, address 68:a3:c4:8f:36:27
ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 4 int 19, AHCI
1.2
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD6400BPVT-2, 01.0> SCSI3 0/direct
fixed naa.50014ee6abefaa87
sd0: 610480MB, 512 bytes/sector, 1250263728 sectors
cd0 at scsibus0 targ 1 lun 0: <MATSHITA, DVD-RAM UJ8A0AS, 1.00> ATAPI 5/cdrom
removable
ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18,
version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18,
version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x42: polling
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600 SO-DIMM
spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
azalia1 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x40: apic 4 int 16
azalia1: codecs: Realtek ALC272
audio0 at azalia1
pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x40
ppb3 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40
pci4 at ppb3 bus 9
pchb1 at pci0 dev 24 function 0 "AMD AMD64 10h HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 10h Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 10h DRAM Cfg" rev 0x00
km0 at pci0 dev 24 function 3 "AMD AMD64 10h Misc Cfg" rev 0x00
pchb4 at pci0 dev 24 function 4 "AMD AMD64 10h Link Cfg" rev 0x00
usb2 at ohci0: USB revision 1.0
uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci1: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
uhub4 at uhub0 port 3 "Genesys Logic USB2.0 Hub" rev 2.00/77.64 addr 2
uhub5 at uhub4 port 1 "Genesys Logic USB2.0 Hub" rev 2.00/77.64 addr 3
umass0 at uhub5 port 2 configuration 1 interface 0 "SanDisk SanDisk Cruzer" rev
2.00/2.00 addr 4
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <SanDisk, SanDisk Cruzer, 8.02> SCSI0 0/direct
removable
sd1: 30547MB, 512 bytes/sector, 62562239 sectors
cd1 at scsibus1 targ 1 lun 1: <SanDisk, SanDisk Cruzer, 8.02> SCSI0 5/cdrom
removable
uvideo0 at uhub1 port 1 configuration 1 interface 0 "SuYin 1.3M HD WebCam" rev
2.00/1.10 addr 2
video0 at uvideo0
umass1 at uhub1 port 2 configuration 1 interface 0 "Generic USB2.0-CRW" rev
2.00/38.82 addr 3
umass1: using SCSI over Bulk-Only
scsibus2 at umass1: 2 targets, initiator 0
sd2 at scsibus2 targ 1 lun 0: <Generic-, Multi-Card, 1.00> SCSI0 0/direct
removable serial.0bda0138516388200000
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (6ef4e685b3b31da9.a) swap on sd0b dump on sd0b
sd3 at scsibus4 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed
sd3: 608171MB, 512 bytes/sector, 1245534987 sectors
softraid0: volume sd3 is roaming, it used to be sd2, updating metadata
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
athn0: device timeout
athn0: device timeout
athn0: device timeout
athn0: device timeout
athn0: device timeout
athn0: device timeout
sd1 detached
cd1 detached
scsibus1 detached
umass0 detached
uhub5 detached
uhub4 detached
uhub4 at uhub0 port 3 "Genesys Logic USB2.0 Hub" rev 2.00/77.64 addr 2
uhub5 at uhub4 port 1 "Genesys Logic USB2.0 Hub" rev 2.00/77.64 addr 3
umodem0 at uhub4 port 3 configuration 1 interface 1 "Android Android" rev
2.00/4.00 addr 4
umodem0: data interface 2, has no CM over data, has no break
umodem0: status change notification available
ucom0 at umodem0
ugen0 at uhub4 port 3 configuration 1 "Android Android" rev 2.00/4.00 addr 4
usbdevs -v
Controller /dev/usb0:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), ATI(0x1002),
rev 1.00
port 1 powered
port 2 powered
port 3 addr 2: high speed, self powered, config 1, USB2.0 Hub(0x0608), Genesys
Logic(0x05e3), rev 77.64
port 1 addr 3: high speed, self powered, config 1, USB2.0 Hub(0x0608),
Genesys Logic(0x05e3), rev 77.64
port 1 powered
port 2 powered
port 3 powered
port 4 powered
port 2 powered
port 3 addr 4: high speed, power 96 mA, config 1, Android(0x6860),
Android(0x04e8), rev 4.00, iSerialNumber 250b272a
port 4 powered
port 4 powered
port 5 powered
Controller /dev/usb1:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), ATI(0x1002),
rev 1.00
port 1 addr 2: high speed, power 500 mA, config 1, 1.3M HD WebCam(0xc21c),
SuYin(0x064e), rev 1.10, iSerialNumber HF1316-P80A-SS06-VA-R01.01.00
port 2 addr 3: high speed, power 500 mA, config 1, USB2.0-CRW(0x0138),
Generic(0x0bda), rev 38.82, iSerialNumber 20090516388200000
port 3 powered
port 4 powered
port 5 powered
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), ATI(0x1002),
rev 1.00
port 1 powered
port 2 powered
port 3 powered
port 4 powered
port 5 powered
Controller /dev/usb3:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), ATI(0x1002),
rev 1.00
port 1 powered
port 2 powered
port 3 powered
port 4 powered
port 5 powered
