hi folks,
the $subject does not work, mii is not configured upon booting. as
result there is no media detected and i watch "vr0: watchdog timeout".
when i boot bsd.mp, ukphy catches up, but still shows:
ukphy0 at vr0 phy 20: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000000, model 0x0000, rev. 0
ukphy0: no media present
ifmedia_set: no match for 0x20/0xffffffff
and vr0 does not work again. in 3.4 it worked with no problems. what
could be wrong?
OpenBSD 3.9-beta (GENERIC) #595: Mon Jan 30 12:13:55 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) CPU 1.70GHz ("GenuineIntel" 686-class) 1.70 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM
real mem = 234463232 (228968K)
avail mem = 206962688 (202112K)
using 2887 buffers containing 11825152 bytes (11548K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 06/27/02, BIOS32 rev. 0 @ 0xfdad0
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf7c30/128 (6 entries)
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT8233 ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xcc000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8751 PCI" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8633 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "S3 ProSavage DDR" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
em0 at pci0 dev 9 function 0 "Intel PRO/1000MT (82541GI)" rev 0x00: irq 10,
address 00:0e:0c:05:0c:3f
em1 at pci0 dev 11 function 0 "Intel PRO/1000MT (82541GI)" rev 0x00: irq 11,
address 00:0e:0c:05:0c:9c
viapm0 at pci0 dev 17 function 0 "VIA VT8233 ISA" rev 0x00
iic0 at viapm0
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA100, channel
0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <MAXTOR 6L040J2>
wd0: 16-sector PIO, LBA, 38172MB, 78177792 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1 at pciide0 channel 1 drive 0: <Maxtor 7L300R0>
wd1: 16-sector PIO, LBA48, 286188MB, 586114704 sectors
wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x70: irq 5, address
00:0a:e6:22:2e:a5
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
it0 at isa0 port 0x290/8: IT87
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
biomask f3cd netmask ffed ttymask ffef
pctr: user-level cycle counter enabled
dkcsum: wd0 matches BIOS drive 0x80
wd1: no disk label
dkcsum: wd1 matches BIOS drive 0x81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
