it was a glimpse of the light and then Jordan's new parser got
busted... actually Jordan has fixed the parser for HP notebooks (i
believe for most of them, since as many as i seen they all crashed the
same way) and with Jordan's changes the kernel boots a lot further
(experiencing death in acpitz later on), yeeha!
OpenBSD 4.3-current (GENERIC) #0: Fri May 16 12:01:20 EEST 2008
[EMAIL PROTECTED]:/data/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1600MHz ("GenuineIntel"
686-class) 1.60 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,TM,SBF,EST,TM2
real mem = 536244224 (511MB)
avail mem = 510406656 (486MB)
User Kernel Config
UKC> disable apm0
324 apm0 disabled
UKC> exit
Continuing...
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 08/30/06, BIOS32 rev. 0 @
0xf0000, SMBIOS rev. 2.3 @ 0xfa1ee (31 entries)
bios0: vendor Hewlett-Packard version "68BDD Ver. F.15" date 08/30/2006
bios0: Hewlett-Packard HP Compaq nc6000 (DJ256A#ABB)
apm at bios0 function 0x15 not configured
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP SSDT
acpi0: wakeup devices C056(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpi device at acpi0 from table DSDT not configured
acpi device at acpi0 from table FACP not configured
acpi device at acpi0 from table SSDT not configured
acpiprt0 at acpi0: bus 1 (C045)
acpiprt1 at acpi0: bus 2 (C056)
acpiprt2 at acpi0: bus 0 (C044)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, FVS, 1600, 1400, 1200, 1000, 800, 600 MHz
acpitz0 at acpi0: critical temperature 103 degC
acpitz1 at acpi0: critical temperature 115 degC
panic: free: non-malloced addr 0xd093cac4 type devbuf
Stopped at Debugger+0x4: leave
Debugger(a,0,a,d093cac4,2) at Debugger+0x4
panic(d06ba700,d093cac4,d06ba178,d1170000,0) at panic+0x63
free(d093cac4,2,453,2) at free+0x40
aml_freevalue(d093ca30,d093ca30,d1181c00,d093ca60,2) at aml_freevalue+0x2d
acpitz_getreading(d11b4400,d078e6c3,0,0) at acpitz_getreading+0x44
acpitz_gettempreading(d11b4400,d078e6c3,d078e6ae) at acpitz_gettempreading+0x21
acpitz_attach(d1181c00,d11b4400,d093cb40,d1181c00,0) at acpitz_attach+0x102
config_attach(d1181c00,d0794458,d093cb40,d067a1d8,d078ca26) at
config_attach+0xfd
acpi_add_device(d11b0ac4,d1181c00,d0679ad4,d1181c00) at acpi_add_device+0x6b
aml_walknodes(d11b0ac4,0,d0679ad4,d1181c00,d11b1d84) at aml_walknodes+0x5d
RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
ddb> rebooting...
and if we disable acpitz:
OpenBSD 4.3-current (GENERIC) #0: Fri May 16 12:01:20 EEST 2008
[EMAIL PROTECTED]:/data/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1600MHz ("GenuineIntel"
686-class) 1.60 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,TM,SBF,EST,TM2
real mem = 536244224 (511MB)
avail mem = 510406656 (486MB)
User Kernel Config
UKC> disable apm
324 apm0 disabled
UKC> disable acpitz
430 acpitz* disabled
UKC> exit
Continuing...
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 08/30/06, BIOS32 rev. 0 @
0xf0000, SMBIOS rev. 2.3 @ 0xfa1ee (31 entries)
bios0: vendor Hewlett-Packard version "68BDD Ver. F.15" date 08/30/2006
bios0: Hewlett-Packard HP Compaq nc6000 (DJ256A#ABB)
apm at bios0 function 0x15 not configured
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP SSDT
acpi0: wakeup devices C056(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpi device at acpi0 from table DSDT not configured
acpi device at acpi0 from table FACP not configured
acpi device at acpi0 from table SSDT not configured
acpiprt0 at acpi0: bus 1 (C045)
acpiprt1 at acpi0: bus 2 (C056)
acpiprt2 at acpi0: bus 0 (C044)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, FVS, 1600, 1400, 1200, 1000, 800, 600 MHz
acpitz at acpi0 not configured
acpitz at acpi0 not configured
acpitz at acpi0 not configured
acpibat0 at acpi0: C137 not present
acpibat1 at acpi0: C136 not present
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: C139
acpibtn1 at acpi0: C138
bios0: ROM list: 0xc0000/0x10000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82855PM Host" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82855PM AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M10 NP" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp0 at vga1: aperture at 0xb0000000, size 0x10000000
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x03: irq 10
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x03: irq 10
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x03: irq 10
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x03: irq 10
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x83
pci2 at ppb1 bus 2
ath0 at pci2 dev 4 function 0 "Atheros AR5212" rev 0x01: irq 11
ath0: AR5213 5.6 phy 4.1 rf5111 1.7 rf2111 2.3, WOR0W, address 00:0b:cd:5b:e0:32
cbb0 at pci2 dev 6 function 0 "O2 Micro OZ711E0 CardBus" rev 0x00: irq 10
cbb1 at pci2 dev 6 function 1 "O2 Micro OZ711E0 CardBus" rev 0x00: irq 10
"O2 Micro OZ711Mx CardBus" rev 0x00 at pci2 dev 6 function 2 not configured
cbb2 at pci2 dev 6 function 3 "O2 Micro OZ711E0 CardBus" rev 0x00: irq 10
bge0 at pci2 dev 14 function 0 "Broadcom BCM5705M Alt" rev 0x03,
BCM5705 A3 (0x3003): irq 11, address 00:14:38:1b:a7:61
brgphy0 at bge0 phy 1: BCM5705 10/100/1000baseT PHY, rev. 2
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 4 device 0 cacheline 0x0, lattimer 0x20
pcmcia1 at cardslot1
cardslot2 at cbb2 slot 2 flags 0
cardbus2 at cardslot2: bus 5 device 0 cacheline 0x0, lattimer 0x20
pcmcia2 at cardslot2
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x03
pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x03: DMA,
channel 0 configured to compatibility, channel 1 configu
red to compatibility
wd0 at pciide0 channel 0 drive 0: <HTS726060M9AT00>
wd0: 16-sector PIO, LBA48, 57231MB, 117210240 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-R2512, 1A04> ATAPI
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x03: irq
11, ICH4 AC97
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
"Intel 82801DB Modem" rev 0x03 at pci0 dev 31 function 6 not configured
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask e54d netmask ed4d ttymask ffcf
mtrr: Pentium Pro MTRR support
uhub0: port 1, set config at addr 2 failed
uhub0: device problem, disabling port 1
ugen0 at uhub3 port 1 "ACTIONTEC Bluetooth by hp" rev 1.10/8.02 addr 2
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
and something even shows up as sensor:
# sysctl hw
hw.machine=i386
hw.model=Intel(R) Pentium(R) M processor 1600MHz ("GenuineIntel" 686-class)
hw.ncpu=1
hw.byteorder=1234
hw.pagesize=4096
hw.disknames=wd0,cd0
hw.diskcount=2
hw.sensors.acpiac0.indicator0=On (power supply)
hw.cpuspeed=1595
hw.setperf=100
hw.vendor=Hewlett-Packard
hw.product=HP Compaq nc6000 (DJ256A#ABB)
hw.version=F.15
hw.serialno=CNU41601CX
hw.uuid=4526200f-985b-d911-0198-6d9908167529
hw.physmem=536244224
hw.usermem=536240128
#
that's neat! the only thing that's painful is that the shiny AML
parser got busted. may be old one now could be fixed, along with
acpidump(8) parser as well?
