On 3/1/07, Joachim Schipper [EMAIL PROTECTED] wrote:
No, but you can already use 7.1 in -current. (To help with testing,
obviously, and some stuff is still broken. So it's not a good idea if
you want the easy way out. Xenocara, and 7.1, will be merged as soon as
4.1 is sent to the CD guys).
On Mon, Mar 12, 2007 at 06:31:42PM +0100, Andreas Maus wrote:
On 3/1/07, Joachim Schipper [EMAIL PROTECTED] wrote:
No, but you can already use 7.1 in -current. (To help with testing,
obviously, and some stuff is still broken. So it's not a good idea if
you want the easy way out. Xenocara,
On Thu, Mar 01, 2007 at 08:22:22AM +0100, Andreas Maus wrote:
On 3/1/07, Sunnz [EMAIL PROTECTED] wrote:
I have an nVidia 7600GS Graphics card, and attempted to get it to work
with the NV(4) driver.
This is not a hardware problem. It is the nv driver.
I had similar problems with my 7800GS.
On 3/1/07, Joachim Schipper [EMAIL PROTECTED] wrote:
No, but you can already use 7.1 in -current. (To help with testing,
obviously, and some stuff is still broken. So it's not a good idea if
you want the easy way out. Xenocara, and 7.1, will be merged as soon as
4.1 is sent to the CD guys).
I
Ok I am keen to be a tester, any documentation on how does one test
and send useful information to the port maintainer? (Will be getting
-current, but that's only the first step.)
I have learnt C from college as well, so I like to do a bit of code
too if I can... any documentation on how Xorg
On Thu, Mar 01, 2007 at 11:05:51PM +1100, Sunnz wrote:
Ok I am keen to be a tester, any documentation on how does one test
and send useful information to the port maintainer? (Will be getting
-current, but that's only the first step.)
I have learnt C from college as well, so I like to do a
Thanks for the linkage will try it shortly.
2007/3/2, Joachim Schipper [EMAIL PROTECTED]:
On Thu, Mar 01, 2007 at 11:05:51PM +1100, Sunnz wrote:
Ok I am keen to be a tester, any documentation on how does one test
and send useful information to the port maintainer? (Will be getting
-current,
On Thu, Mar 01, 2007 at 11:05:51PM +1100, Sunnz wrote:
Ok I am keen to be a tester, any documentation on how does one test
and send useful information to the port maintainer? (Will be getting
-current, but that's only the first step.)
Be aware that you need to rebuild all ports using X from
On 3/1/07, Sunnz [EMAIL PROTECTED] wrote:
Ok I am keen to be a tester, any documentation on how does one test
and send useful information to the port maintainer? (Will be getting
-current, but that's only the first step.)
I have learnt C from college as well, so I like to do a bit of code
Thanks for the advice, I think I will just use a separate disk and
install OpenBSD from scratch for it.
2007/3/2, Andreas Bihlmaier [EMAIL PROTECTED]:
On Thu, Mar 01, 2007 at 11:05:51PM +1100, Sunnz wrote:
Ok I am keen to be a tester, any documentation on how does one test
and send useful
Hi,
I have an nVidia 7600GS Graphics card, and attempted to get it to work
with the NV(4) driver.
There shall be no hardware problem, as I have tested it with VESA(4)
driver, and X -config /root/xorg.conf.new works.
This is the monitor that I was trying to get to work:
Hello.
Your three attachments (dmesg.boot, xorg.conf.new and Xorg.0.log) were
removed, we can't read them...
Regards,
Maxime DERCHE
Sunnz wrote:
Hi,
I have an nVidia 7600GS Graphics card, and attempted to get it to work
with the NV(4) driver.
There shall be no hardware problem, as I
Ok I have uploaded it my site: http://sunnz.net/nv.tgz
2007/3/1, Maxime DERCHE [EMAIL PROTECTED]:
Hello.
Your three attachments (dmesg.boot, xorg.conf.new and Xorg.0.log) were
removed, we can't read them...
Regards,
Maxime DERCHE
Sunnz wrote:
Hi,
I have an nVidia 7600GS Graphics card,
On 3/1/07, Sunnz [EMAIL PROTECTED] wrote:
Hi,
I have an nVidia 7600GS Graphics card, and attempted to get it to work
with the NV(4) driver.
There shall be no hardware problem, as I have tested it with VESA(4)
driver, and X -config /root/xorg.conf.new works.
This is the monitor that I was
14 matches
Mail list logo
