Melameth, Daniel D. wrote:
Theo de Raadt wrote:
This is due to a problem in the ral driver. I have mailed damien,
and hopefully a fix will be written soon. (the same mistake is in
some of the other drivers drivers he has written too)
Please post/have someone post a follow-up when this is
On Friday 23 June 2006 01:47, Theo de Raadt wrote:
This is due to a problem in the ral driver. I have mailed damien, and
hopefully a fix will be written soon. (the same mistake is in some of
the other drivers drivers he has written too)
Could this be what's causing (at least on i386) kismet to
hi folks,
my setup
pc1 - soekris 4801 - soekris 4801 - pc2
between the soekris boxes wlan with ralink (2561)
default 3.9 setup without isakmp ...
pc1
ifconfig eth0 192.168.20.2 netmask 255.255.255.0 up
route add default gw 192.168.20.1 eth0
box1
sysctl -w net.inet.ip.forwarding=1
ifconfig
an additional info:
in the first step i use the ralink RT2561T.
now i tried the ralink RT2560F and i must
press ifconfig sis0 up every 3 seconds and
the throughput is also very bad.
i think it's can also be a problem of the
ralink driver.
-Thomas
hi folks,
my setup
pc1 - soekris 4801 -
On 2006/06/22 17:38, Thomas Bvrnert wrote:
pc1 - soekris 4801 - soekris 4801 - pc2
between the soekris boxes wlan with ralink (2561)
all works fine, but if i copy a file with 500MB from
pc2 to pc1 with scp i got a break on the communication
on the sis0 on box1 after some seconds.
please
ok i tried it and it works, ... strange ...
the throughout is a little bit higher, without the
patch it was 2,4 MB/s and with the patch 2,7 MB/s.
(scp) and i've 1500 total interrupts more.
But i think the problem is on another place in the code.
Thomas
On Thu, 2006-06-22 at 17:59 +0100, Stuart
On 2006/06/22 19:44, Thomas Bvrnert wrote:
ok i tried it and it works, ... strange ...
the throughout is a little bit higher, without the
patch it was 2,4 MB/s and with the patch 2,7 MB/s.
(scp) and i've 1500 total interrupts more.
But i think the problem is on another place in the code.
it's shure no power-saving problem, because:
i'm using the boxes as router with ral.
with the RT2561 Chip i had this problem only after 500MB
transferred data, with the RT2560 Chip i had this problem
after some MB and 3 seconds. And thats no power-saving
after 3 seconds. i've no problem with a
This is due to a problem in the ral driver. I have mailed damien, and
hopefully a fix will be written soon. (the same mistake is in some of
the other drivers drivers he has written too)
Theo de Raadt wrote:
This is due to a problem in the ral driver. I have mailed damien, and
hopefully a fix will be written soon. (the same mistake is in some of
the other drivers drivers he has written too)
Please post/have someone post a follow-up when this is done. I have,
what I believe,
10 matches
Mail list logo
