Hello,
I'm operating a router using a 4 port D-Link ethernet
card with sundance chipset.
Since the machine is not doing much work besides shuffling
IP-packets from one NIC to onother, an Atom processor used
to be sufficent. System was OpenBSD-4.6, and CPU load by
interrupts was approx 30%, idle time was 70%. The machine
worked fine, but now we changed the mainboard.
ifconfig showed interfaces ste0 to ste3.
The new main board has a 4 core Atom processor, and
new system is OpenBSD-4.7.
This caused two changes:
1. CPU load by interrupts is now approx 80%.
2. ifconfig only shows ste2 and ste3.
ste2 is now connected to physical port 1 (which was ste0 with
pervious kernel/board)
ste3 is now connected to physical port 2 (whcih was ste1 with
previous kernel/board)
I assume the new board is worse then the previous one.
googling a while, I found, that the missing of ste0 and ste1 could
be a power problem, when the board is too slow to serve the higher
power request by the PCI card.
If you see any chance to improve the situation by software,
your hints are welcome.
Head of /var/log/messages below.
Roger.
Dec 8 18:13:18 ancotel3 syslogd: start
Dec 8 18:13:18 ancotel3 /bsd: OpenBSD 4.7 (GENERIC.MP) #449: Wed Mar 17
20:55:07 MDT 2010
Dec 8 18:13:18 ancotel3 /bsd:
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
Dec 8 18:13:18 ancotel3 /bsd: RTC BIOS diagnostic error 80<clock_battery>
Dec 8 18:13:18 ancotel3 /bsd: cpu0: Intel(R) Atom(TM) CPU D510 @
1.66GHz ("GenuineIntel" 686-class) 1.67 GHz
Dec 8 18:13:18 ancotel3 /bsd: cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,TM2,CX16,xTPR
Dec 8 18:13:18 ancotel3 /bsd: real mem = 2128945152 (2030MB)
Dec 8 18:13:18 ancotel3 /bsd: avail mem = 2054012928 (1958MB)
Dec 8 18:13:18 ancotel3 /bsd: RTC BIOS diagnostic error 80<clock_battery>
Dec 8 18:13:18 ancotel3 /bsd: mainbus0 at root
Dec 8 18:13:18 ancotel3 /bsd: bios0 at mainbus0: AT/286+ BIOS, date
03/08/10, SMBIOS rev. 2.5 @ 0xe4410 (25 entries)
Dec 8 18:13:18 ancotel3 /bsd: bios0: vendor Intel Corp. version
"MOPNV10J.86A.0175.2010.0308.0620" date 03/08/2010
Dec 8 18:13:18 ancotel3 /bsd: bios0: Intel Corporation D510MO
Dec 8 18:13:18 ancotel3 /bsd: acpi0 at bios0: rev 2
Dec 8 18:13:18 ancotel3 /bsd: acpi0: tables DSDT FACP APIC MCFG HPET SSDT
Dec 8 18:13:18 ancotel3 /bsd: acpi0: wakeup devices SLPB(S4) PS2M(S4)
PS2K(S4) UAR1(S4) UAR2(S4) P32_(S4) ILAN(S4) PEX0(S4) PEX1(S4) PEX2(S4)
PEX3(S4) UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3) EHCI(S
Dec 8 18:13:18 ancotel3 /bsd: acpitimer0 at acpi0: 3579545 Hz, 24 bits
Dec 8 18:13:18 ancotel3 /bsd: acpimadt0 at acpi0 addr 0xfee00000: PC-AT
compat
Dec 8 18:13:18 ancotel3 /bsd: cpu0 at mainbus0: apid 0 (boot processor)
Dec 8 18:13:18 ancotel3 /bsd: cpu0: apic clock running at 166MHz
Dec 8 18:13:18 ancotel3 /bsd: cpu1 at mainbus0: apid 1 (application
processor)
Dec 8 18:13:18 ancotel3 /bsd: cpu1: Intel(R) Atom(TM) CPU D510 @
1.66GHz ("GenuineIntel" 686-class) 1.67 GHz
Dec 8 18:13:18 ancotel3 /bsd: cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,TM2,CX16,xTPR
Dec 8 18:13:18 ancotel3 /bsd: cpu2 at mainbus0: apid 2 (application
processor)
Dec 8 18:13:18 ancotel3 /bsd: cpu2: Intel(R) Atom(TM) CPU D510 @
1.66GHz ("GenuineIntel" 686-class) 1.67 GHz
Dec 8 18:13:18 ancotel3 /bsd: cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,TM2,CX16,xTPR
Dec 8 18:13:18 ancotel3 /bsd: cpu3 at mainbus0: apid 3 (application
processor)
Dec 8 18:13:18 ancotel3 /bsd: cpu3: Intel(R) Atom(TM) CPU D510 @
1.66GHz ("GenuineIntel" 686-class) 1.67 GHz
Dec 8 18:13:18 ancotel3 /bsd: cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,TM2,CX16,xTPR
Dec 8 18:13:18 ancotel3 /bsd: ioapic0 at mainbus0: apid 8 pa
0xfec00000, version 20, 24 pins
Dec 8 18:13:18 ancotel3 /bsd: ioapic0: misconfigured as apic 0,
remapped to apid 8
Dec 8 18:13:18 ancotel3 /bsd: acpihpet0 at acpi0: 14318179 Hz
Dec 8 18:13:18 ancotel3 /bsd: acpiprt0 at acpi0: bus 5 (P32_)
Dec 8 18:13:18 ancotel3 /bsd: acpiprt1 at acpi0: bus 0 (PCI0)
Dec 8 18:13:18 ancotel3 /bsd: acpiprt2 at acpi0: bus 1 (PEX0)
Dec 8 18:13:18 ancotel3 /bsd: acpiprt3 at acpi0: bus 2 (PEX1)
Dec 8 18:13:18 ancotel3 /bsd: acpiprt4 at acpi0: bus 3 (PEX2)
Dec 8 18:13:18 ancotel3 /bsd: acpiprt5 at acpi0: bus 4 (PEX3)
Dec 8 18:13:18 ancotel3 /bsd: acpicpu0 at acpi0: C1, PSS
Dec 8 18:13:18 ancotel3 /bsd: acpicpu1 at acpi0: C1, PSS
Dec 8 18:13:18 ancotel3 /bsd: acpicpu2 at acpi0: C1, PSS
Dec 8 18:13:18 ancotel3 /bsd: acpicpu3 at acpi0: C1, PSS
Dec 8 18:13:18 ancotel3 /bsd: acpibtn0 at acpi0: SLPB
Dec 8 18:13:18 ancotel3 /bsd: bios0: ROM list: 0xc0000/0xda00!
0xce000/0x1000
Dec 8 18:13:18 ancotel3 /bsd: pci0 at mainbus0 bus 0: configuration
mode 1 (bios)
Dec 8 18:13:18 ancotel3 /bsd: pchb0 at pci0 dev 0 function 0 "Intel
Pineview DMI Bridge" rev 0x02
Dec 8 18:13:18 ancotel3 /bsd: vga1 at pci0 dev 2 function 0 "Intel
Pineview Integrated Graphics Controller" rev 0x02
Dec 8 18:13:18 ancotel3 /bsd: wsdisplay0 at vga1 mux 1: console (80x25,
vt100 emulation)
Dec 8 18:13:18 ancotel3 /bsd: wsdisplay0: screen 1-5 added (80x25,
vt100 emulation)
Dec 8 18:13:18 ancotel3 /bsd: intagp at vga1 not configured
Dec 8 18:13:18 ancotel3 /bsd: azalia0 at pci0 dev 27 function 0 "Intel
82801GB HD Audio" rev 0x01: apic 8 int 22 (irq 9)
Dec 8 18:13:18 ancotel3 /bsd: azalia0: codecs: Realtek ALC662
Dec 8 18:13:18 ancotel3 /bsd: audio0 at azalia0
Dec 8 18:13:18 ancotel3 /bsd: ppb0 at pci0 dev 28 function 0 "Intel
82801GB PCIE" rev 0x01: apic 8 int 17 (irq 255)
Dec 8 18:13:18 ancotel3 /bsd: pci1 at ppb0 bus 1
Dec 8 18:13:18 ancotel3 /bsd: re0 at pci1 dev 0 function 0 "Realtek
8168" rev 0x03: RTL8168D/8111D (0x2800), apic 8 int 16 (irq 11), address
70:71:bc:6c:0a:81
Dec 8 18:13:18 ancotel3 /bsd: rgephy0 at re0 phy 7: RTL8169S/8110S PHY,
rev. 2
Dec 8 18:13:18 ancotel3 /bsd: ppb1 at pci0 dev 28 function 1 "Intel
82801GB PCIE" rev 0x01: apic 8 int 16 (irq 255)
Dec 8 18:13:18 ancotel3 /bsd: pci2 at ppb1 bus 2
Dec 8 18:13:18 ancotel3 /bsd: ppb2 at pci0 dev 28 function 2 "Intel
82801GB PCIE" rev 0x01: apic 8 int 18 (irq 255)
Dec 8 18:13:18 ancotel3 /bsd: pci3 at ppb2 bus 3
Dec 8 18:13:18 ancotel3 /bsd: ppb3 at pci0 dev 28 function 3 "Intel
82801GB PCIE" rev 0x01: apic 8 int 19 (irq 255)
Dec 8 18:13:18 ancotel3 /bsd: pci4 at ppb3 bus 4
Dec 8 18:13:18 ancotel3 /bsd: ppb4 at pci0 dev 30 function 0 "Intel
82801BAM Hub-to-PCI" rev 0xe1
Dec 8 18:13:18 ancotel3 /bsd: pci5 at ppb4 bus 5
Dec 8 18:13:18 ancotel3 /bsd: ppb5 at pci5 dev 0 function 0 "Intel
S21152BB PCI-PCI" rev 0x00
Dec 8 18:13:18 ancotel3 /bsd: pci6 at ppb5 bus 6
Dec 8 18:13:18 ancotel3 /bsd: ste0 at pci6 dev 4 function 0 "D-Link
Systems 550TX" rev 0x15: apic 8 int 21 (irq 10)ste0: global reset never
completed
Dec 8 18:13:18 ancotel3 /bsd: ste0: eeprom failed to come ready
Dec 8 18:13:18 ancotel3 /bsd: : failed to read station address
Dec 8 18:13:18 ancotel3 /bsd: ste1 at pci6 dev 5 function 0 "D-Link
Systems 550TX" rev 0x15: apic 8 int 22 (irq 9)ste1: global reset never
completed
Dec 8 18:13:18 ancotel3 /bsd: ste1: eeprom failed to come ready
Dec 8 18:13:18 ancotel3 /bsd: : failed to read station address
Dec 8 18:13:18 ancotel3 /bsd: ste2 at pci6 dev 6 function 0 "D-Link
Systems 550TX" rev 0x15: apic 8 int 23 (irq 11), address 00:1e:58:e0:2f:e2
Dec 8 18:13:18 ancotel3 /bsd: ukphy0 at ste2 phy 1: Generic IEEE 802.3u
media interface, rev. 0: OUI 0x0090c3, model 0x0004
Dec 8 18:13:18 ancotel3 /bsd: ste3 at pci6 dev 7 function 0 "D-Link
Systems 550TX" rev 0x15: apic 8 int 20 (irq 9), address 00:1e:58:e0:2f:e3
Dec 8 18:13:18 ancotel3 /bsd: ukphy1 at ste3 phy 1: Generic IEEE 802.3u
media interface, rev. 0: OUI 0x0090c3, model 0x0004
Dec 8 18:13:18 ancotel3 /bsd: pcib0 at pci0 dev 31 function 0 "Intel
Tigerpoint LPC Controller" rev 0x01
Dec 8 18:13:18 ancotel3 /bsd: pciide0 at pci0 dev 31 function 2 "Intel
82801GB SATA" rev 0x01: DMA, channel 0 configured to native-PCI, channel
1 configured to native-PCI
Dec 8 18:13:18 ancotel3 /bsd: pciide0: using apic 8 int 19 (irq 10) for
native-PCI interrupt
Dec 8 18:13:18 ancotel3 /bsd: wd0 at pciide0 channel 0 drive 0: <INTEL
SSDSA2M040G2GC>
Dec 8 18:13:18 ancotel3 /bsd: wd0: 16-sector PIO, LBA48, 38166MB,
78165360 sectors
Dec 8 18:13:18 ancotel3 /bsd: wd0(pciide0:0:0): using PIO mode 4,
Ultra-DMA mode 6
Dec 8 18:13:18 ancotel3 /bsd: ichiic0 at pci0 dev 31 function 3 "Intel
82801GB SMBus" rev 0x01: apic 8 int 19 (irq 10)
Dec 8 18:13:18 ancotel3 /bsd: iic0 at ichiic0
Dec 8 18:13:18 ancotel3 /bsd: spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM
non-parity PC2-6400CL5
Dec 8 18:13:18 ancotel3 /bsd: isa0 at pcib0
Dec 8 18:13:18 ancotel3 /bsd: isadma0 at isa0
Dec 8 18:13:18 ancotel3 /bsd: pckbc0 at isa0 port 0x60/5
Dec 8 18:13:18 ancotel3 /bsd: pckbd0 at pckbc0 (kbd slot)
Dec 8 18:13:18 ancotel3 /bsd: pckbc0: using irq 1 for kbd slot
Dec 8 18:13:18 ancotel3 /bsd: wskbd0 at pckbd0: console keyboard, using
wsdisplay0
Dec 8 18:13:18 ancotel3 /bsd: pcppi0 at isa0 port 0x61
Dec 8 18:13:18 ancotel3 /bsd: midi0 at pcppi0: <PC speaker>
Dec 8 18:13:18 ancotel3 /bsd: spkr0 at pcppi0
Dec 8 18:13:18 ancotel3 /bsd: wbsio0 at isa0 port 0x4e/2: W83627THF rev
0x84
Dec 8 18:13:18 ancotel3 /bsd: lm1 at wbsio0 port 0x290/8: W83627THF
Dec 8 18:13:18 ancotel3 /bsd: npx0 at isa0 port 0xf0/16: reported by
CPUID; using exception 16
Dec 8 18:13:18 ancotel3 /bsd: mtrr: Pentium Pro MTRR support
Dec 8 18:13:18 ancotel3 /bsd: vscsi0 at root
Dec 8 18:13:18 ancotel3 /bsd: scsibus0 at vscsi0: 256 targets
Dec 8 18:13:18 ancotel3 /bsd: softraid0 at root
Dec 8 18:13:18 ancotel3 /bsd: root on wd0a swap on wd0b dump on wd0b
Dec 8 18:13:18 ancotel3 savecore: no core dump
