Mihai Popescu wrote:
Had anyone any success with this usb wireless in recent snapshots.
Following some hints that this chip is not properly powered from USB
port, I hardwired it to the power supply of the computer, but the
result is the same: it fails to load the firmware.
Nevertheless I had
Had anyone any success with this usb wireless in recent snapshots.
Following some hints that this chip is not properly powered from USB
port, I hardwired it to the power supply of the computer, but the
result is the same: it fails to load the firmware.
Nevertheless I had some interesting results
Just for the record, I have tried this dongle on a different computer,
Intel based and the result is the same. I found a dmesg with this
model showing the MAC, but my model shows no MAC. Maybe this is a
different revision with a slighty different chip. No big deal.
Thanks.
> I don't know where the problem is coming from.
I will try to feed it +5Vcc directly from the power supply then :-).
It will be it or motherboard ...
On Mon, May 23, 2016 at 02:46:16PM +0300, Mihai Popescu wrote:
> > I believe this is a power management issue with ehci(4).
> > Your device doesn't get enough juice to power up.
>
> Hmmm, it is the second Lenovo machine i have with usb issues.
>
> As far as you can tell, is it because of pure
> I believe this is a power management issue with ehci(4).
> Your device doesn't get enough juice to power up.
Hmmm, it is the second Lenovo machine i have with usb issues.
As far as you can tell, is it because of pure hardware or is it
because of software drivers?
Thanks.
On Mon, May 23, 2016 at 12:49:56PM +0300, Mihai Popescu wrote:
> Hello,
>
> I have this usb2.0 dongle, TP-LINK TL-WN722N wireless device. I've got
> it after I installed OpenBSD so I have run fw_update -a for firmware.
> Still I get this error athn0: could not load firmware after plugin.
> The
Hello,
I have this usb2.0 dongle, TP-LINK TL-WN722N wireless device. I've got
it after I installed OpenBSD so I have run fw_update -a for firmware.
Still I get this error athn0: could not load firmware after plugin.
The manual page says it should be an error number in message, but it
is not.
8 matches
Mail list logo