bbee writes:
Hi,
In a net5501 I have a rt2860 ral card, running the Feb 04 snapshot:
ral0 at pci0 dev 14 function 0 Ralink RT2860 rev 0x00: irq 10
ral0: MAC/BBP RT2860 (rev 0x0101), RF RT2820 (MIMO 2T3R)
I've been trying snapshots off and on since damien@ started tinkering
with the rt2860
On 2009-02-07, bbee bumble@xs4all.nl wrote:
On Sat, 7 Feb 2009, Stuart Henderson wrote:
enable ddb.console=1 and send it a BREAK, see if you can get some
trace out of ddb.
Thanks for the suggestion. I tried it, but the kernel's not responding to
the break :(
Does BREAK work under
On 2009-02-07, Christiano Farina Haesbaert christiano...@gmail.com wrote:
Hello there, I'm considering buying a thinkpad R61, if someone has any
information on the hardware support for it I would appreciate.
Don't expect suspend to work yet, and you don't want the version
with nVidia graphics.
Rogier Krieger wrote:
On Sun, Feb 8, 2009 at 02:09, Graeme Lee gra...@omni.net.au wrote:
The bgpd log shows this:
bgpd: send_rtmsg: action 1, prefix 2001:dc8:c000::/36: Network is
unreachable
bgpd: send_rtmsg: action 1, prefix 2a01:a8::/32: Network is unreachable
for every network received
On Sat, Feb 07, 2009 at 07:39:24PM -0200, Christiano Farina Haesbaert wrote:
Hello there, I'm considering buying a thinkpad R61, if someone has any
information on the hardware support for it I would appreciate.
Best Regards.
--
Christiano Farina Haesbaert
We bought a bunch of R61's at
Hi there,
is there any way to execute sudo (in combination with a password to
provide) on remote servers using tentakel? Actualy tentakel hangs,
when I'm executing sudo ls -l / on a bunch of servers. Without sudo
anything works fine, as you can see from the example below.
Hi all,
I have one disk (wd2) that does'nt shut down. It has Power Management
feature but does not reply to apmset. It's a brand new disk ; I believe
it should have the feature.
Could someone help me ?
Thanks.
J-F
Le samedi 07 fC)vrier 2009 C 13:03 +0100, Jean-FranC'ois a C)crit :
Hi All,
In message c4bb3a29-8051-4d34-a691-53d4f035d...@smartterra.eu
so spake Falk Brockerhoff - smartTERRA GmbH (nmc):
is there any way to execute sudo (in combination with a password to
provide) on remote servers using tentakel? Actualy tentakel hangs,
when I'm executing sudo ls -l / on
What about the T61 with the nvidia quadro, you think I would have
problems as well ?
I'm considering t61 and X40,X60 at the moment.
--
Christiano Farina Haesbaert
On 15:24, Sun 08 Feb 09, Christiano Farina Haesbaert wrote:
What about the T61 with the nvidia quadro, you think I would have
problems as well ?
I'm considering t61 and X40,X60 at the moment.
T61 works great, but I have one with intel vga.
I dont like the nvidia vga.
--
Christiano Farina
Christiano,
On 08-Feb-2009 Christiano Farina Haesbaert wrote:
What about the T61 with the nvidia quadro, you think I would have
problems as well ? I'm considering t61 and X40,X60 at the moment.
I recently purchased a t500 from Lenovo, which is a replacement for
their t61 line, I think. You
On Sun, Feb 08, 2009 at 03:24:04PM -0200, Christiano Farina Haesbaert wrote:
What about the T61 with the nvidia quadro, you think I would have
problems as well ?
I'm considering t61 and X40,X60 at the moment.
Do yourself a favour. Do not buy hardware with NVidia graphics hardware.
You'd be
Hi all,
Installed a clean OBSD 4.4 stable.
Installed php5, pear and pear-DB. All from packages.
I then made a test script to see if httpd, php and mysql are running
correctly. When i add require'DB.php'; the script won't work trough
apache. When i put it through php directly i get no errors or
Hi,
I've just played with make and the .SILENT: target.
Normally this suppress echoing the command as expected.
But some special targets like .BEGIN, .END and .INTERRUPT
seams to ignore it.
Reading the code I've seen this kind of silence is set in
Job_CheckCommands(). But this routine will only
Hi all,
in order to put in place a firewall system capable of handling a
multi-gigabit connection, my company is also considering OpenBSD.
I've been using it for my firewall setups since OpenBSD 3.5, but I have no
experience on how will it perform on a multi-gigabit link.
My company already uses
Graeme Lee wrote:
snip
Network layout is somewhat complicated. 1 x ebgp and 1 x ibgp session
receive ipv4 world tables. Gif tunnel to a hurricane router in Hong
Kong. I'm receiving ipv6 world bgp tables from this peer.
Connectivity to the peer is fine. Just can't get past it.
I can
tico wrote:
Graeme Lee wrote:
snip
Network layout is somewhat complicated. 1 x ebgp and 1 x ibgp
session receive ipv4 world tables. Gif tunnel to a hurricane router
in Hong Kong. I'm receiving ipv6 world bgp tables from this peer.
Connectivity to the peer is fine. Just can't get past
hmm, on Thu, Feb 05, 2009 at 06:44:25PM +0100, Jesus Sanchez said that
On windows, formated as FAT32, the copy of 1,2 GB took
about 6 minutes, so it's about 3.41 MB/s, that's more than USB1.1 speed
(I think) but in OpenBSD 4.4 I have 1.5 MB/s speed. I will attach dmesg
as soon as possible.
Make sure you are plugging directly into the MOBO connectors.
Many cases include crappy USB one hubs which causes degraded performance.
2009/2/9 frantisek holop min...@obiit.org:
hmm, on Thu, Feb 05, 2009 at 06:44:25PM +0100, Jesus Sanchez said that
On windows, formated as FAT32, the copy of
John Schofield schrieb:
I'm new to OpenBSD, so I may be doing something stupid. But Google,
the FAQ, and other resources have not shed any light.
I'm attempting to set up an IBM ThinkCentre desktop PC as a
router/firewall for my home network. OpenBSD did not recognize the
onboard NIC, and it
Hello,
Just a quick question, what is the status of hoststated ?
I ran into http://www.openbsd.org/papers/eurobsdcon07/pyr-
loadbalancing/ and I found that a quite exiting projet.
Unfortunalty it doesn't seems to be into 4.4 or even on snapshots...
Is there any replacements ? drawbacks or
On Sun, Feb 08, 2009 at 08:37:43AM -0500, Kenneth R Westerback wrote:
On Sat, Feb 07, 2009 at 07:39:24PM -0200, Christiano Farina Haesbaert wrote:
Hello there, I'm considering buying a thinkpad R61, if someone has any
information on the hardware support for it I would appreciate.
Best
http://marc.info/?l=openbsd-miscm=123266988519415w=2
On Mon, Feb 09, 2009 at 12:26:04AM +0100, Xavier Beaudouin wrote:
Hello,
Just a quick question, what is the status of hoststated ?
I ran into http://www.openbsd.org/papers/eurobsdcon07/pyr-loadbalancing/
and I found that a quite exiting
Unfortunalty it doesn't seems to be into 4.4 or even on snapshots...
it has been renamed to relayd(8)
Sam Fourman Jr.
Fourman Networks
On Mon, Feb 09, 2009 at 12:26:04AM +0100, Xavier Beaudouin wrote:
Hello,
Just a quick question, what is the status of hoststated ?
I ran into http://www.openbsd.org/papers/eurobsdcon07/pyr-
loadbalancing/ and I found that a quite exiting projet.
Unfortunalty it doesn't seems to be into
A little more googling would have introduced you to relayd(8).
On 2/8/09, Xavier Beaudouin k...@oav.net wrote:
Hello,
Just a quick question, what is the status of hoststated ?
I ran into http://www.openbsd.org/papers/eurobsdcon07/pyr-
loadbalancing/ and I found that a quite exiting
This question it's a little complicated to make. It's more a curiosity
than a technical situation. First I will try to put the situation.
Let's say I'm the root of a system, and one of my users (user foo) have
his home dir with rwx privileges ( /home/foo/ have permissions 700 ) and
I wan't to
Thanks very much, Dorian, Stijn, and Stuart:
I upgraded to 4.4-Current dated February 6. No change in symptoms.
It occurred to me that I had eliminated hardware problems with the
cards, but not with the PCI slots. So I moved /etc/hostname.re0 to
/root, and booted with re1 enabled. Freeze.
Next
Graeme Lee wrote:
tico wrote:
Graeme Lee wrote:
snip
Network layout is somewhat complicated. 1 x ebgp and 1 x ibgp
session receive ipv4 world tables. Gif tunnel to a hurricane router
in Hong Kong. I'm receiving ipv6 world bgp tables from this peer.
Connectivity to the peer is fine.
On Sun, Feb 8, 2009 at 4:51 PM, John Mark Schofield r...@sudosu.net wrote:
This is looking to me like a bad slot on the motherboard. Which
stinks, as this machine is out of warranty. Anyone have any further
troubleshooting suggestions?
Didn't you state earlier that you had tried the system
On Sun, Feb 01, 2009 at 10:07:49PM -0600, Karl O. Pinc wrote:
I seem to have a problem where 4.4 hangs writing to swap.
Chances are its fixed in -current.
--
Ariane
On Mon, Feb 09, 2009 at 01:46:39AM +0100, Jesus Sanchez wrote:
This question it's a little complicated to make. It's more a curiosity
than a technical situation. First I will try to put the situation.
Let's say I'm the root of a system, and one of my users (user foo) have
his home dir with
tico wrote:
Graeme Lee wrote:
tico wrote:
Graeme Lee wrote:
snip
Network layout is somewhat complicated. 1 x ebgp and 1 x ibgp
session receive ipv4 world tables. Gif tunnel to a hurricane
router in Hong Kong. I'm receiving ipv6 world bgp tables from this
peer. Connectivity to the
Graeme Lee wrote:
tico wrote:
Graeme Lee wrote:
tico wrote:
Graeme Lee wrote:
snip
Network layout is somewhat complicated. 1 x ebgp and 1 x ibgp
session receive ipv4 world tables. Gif tunnel to a hurricane
router in Hong Kong. I'm receiving ipv6 world bgp tables from
this peer.
On Sun, 8 Feb 2009 15:53:01 -0700 (MST)
Marc Balmer mbal...@cvs.openbsd.org wrote:
CVSROOT: /cvs
Module name: src
Changes by: mbal...@cvs.openbsd.org 2009/02/08 15:53:01
Removed files:
usr.sbin/wake : Makefile wake.8 wake.c
Log message:
Remove wake(8). The bin
Graeme Lee wrote:
Graeme Lee wrote:
tico wrote:
Graeme Lee wrote:
tico wrote:
Graeme Lee wrote:
snip
Network layout is somewhat complicated. 1 x ebgp and 1 x ibgp
session receive ipv4 world tables. Gif tunnel to a hurricane
router in Hong Kong. I'm receiving ipv6 world bgp tables
On windows, formated as FAT32, the copy of 1,2 GB took
about 6 minutes, so it's about 3.41 MB/s, that's more than USB1.1 speed
(I think) but in OpenBSD 4.4 I have 1.5 MB/s speed. I will attach dmesg
as soon as possible.
for many devices 1.5 MB/s is already USB2. e.g. my mp3 player.
How high is too high? I have a utility that sets recv buf size
to 100,000,000 and it works fine on FreeBSD and NetBSD. (Not
tested yet on OpenBSD.) Necessary when the other end has buggy
network code and insufficient send buf.
Could you clarify what you
On 01:04, Mon 09 Feb 09, Marc Espie wrote:
On Sun, Feb 08, 2009 at 08:37:43AM -0500, Kenneth R Westerback wrote:
On Sat, Feb 07, 2009 at 07:39:24PM -0200, Christiano Farina Haesbaert wrote:
Hello there, I'm considering buying a thinkpad R61, if someone has any
information on the hardware
i recently started using intel wireless on my thinkpad x60, through
the wpi(4) driver. earlier, i had heating issues, which were resolved
by setting hw.setperf to 0, but now i again see my laptop heating up
-- especially below my right palm.
temperature sensor outputs from sysctl shows:
40 matches
Mail list logo
