On 2015-03-22, Ted Unangst t...@tedunangst.com wrote:
trunk uses the MAC of the master device, which is probably going to be em0 in
many setups, but it's possible to reorder the devices and make iwm0 the
master. A little less convenient as it won't failover to the ethernet
automatically.
On Sun, Mar 22, 2015 at 06:49:33AM -0400, Ted Unangst wrote:
Jonathan Gray wrote:
On Sun, Mar 22, 2015 at 09:16:08AM +0100, Stefan Sperling wrote:
If the firmare image is not present at boot, no interface is created.
After installing the firmware with fw_update (which succeeds because
Hi all,
one of the remaining kinks in the cable that still need working out
after me updating to OpenBSD 5.6 is the fact that I can no longer use
apcupsd to monitor the APC Back-UPS CS 500 that is connected to the
server via USB. From what I have gathered so far, one has to use
sensorsd instead,
On Sun, Mar 22, 2015 at 10:49 AM, Stuart Henderson s...@spacehopper.org wrote:
Untested, but maybe this works:
ifconfig em0 up
ifconfig iwm0 up
ifconfig trunk0 create
ifconfig trunk0 trunkport iwm0 trunkport em0 trunkproto failover
ifconfig trunk0 -trunkport iwm0
ifconfig iwm0 up
ifconfig
On Sun, Mar 22, 2015 at 09:53:24AM +, Stuart Henderson wrote:
On 2015-03-21, John E.P. Hynes j...@hytronix.com wrote:
If anyone has any ideas, or would like more info, or if a dev suspects
it could be the driver, contact me off-list and I can arrange to send
hardware if it helps.
On Sun, Mar 22, 2015 at 01:45:45PM +1100, Jonathan Gray wrote:
Try the following.
This diff re-introduces an unrelated problem fixed in r1.7.
Interface attachment is moved back to the attach-hook, and the driver
tries to load the firmware from disk before creating an interface.
If the firmare
Jonathan Gray wrote:
On Sun, Mar 22, 2015 at 09:16:08AM +0100, Stefan Sperling wrote:
If the firmare image is not present at boot, no interface is created.
After installing the firmware with fw_update (which succeeds because
it looks for iwm in dmesg not ifconfig) there is no way to
It does the same thing on 5.3 through -current. I haven't put that box in the
rack yet so I can try a few older kernels too and see if any work.
Will report back.
On Mar 22, 2015, at 8:45 AM, Claudio Jeker cje...@diehard.n-r-g.com wrote:
On Sun, Mar 22, 2015 at 09:53:24AM +, Stuart
On Sun, Mar 22, 2015 at 09:16:08AM +0100, Stefan Sperling wrote:
On Sun, Mar 22, 2015 at 01:45:45PM +1100, Jonathan Gray wrote:
Try the following.
This diff re-introduces an unrelated problem fixed in r1.7.
Interface attachment is moved back to the attach-hook, and the driver
tries to
On 2015-03-21, John E.P. Hynes j...@hytronix.com wrote:
If anyone has any ideas, or would like more info, or if a dev suspects
it could be the driver, contact me off-list and I can arrange to send
hardware if it helps.
It might be worth talking to Supermicro.
On Sun, Mar 22, 2015 at 03:26:30PM +, Stuart Henderson wrote:
On 2015-03-22, T. Ribbrock emga...@gmx.net wrote:
What I cannot seem to get to work is that sensorsd *reacts* to these
changes. Based on the examples in the thread mentioned above, I've
created a small script
So I could renice the processes cron runs but decided to renice the
whole of cron instead/as well.
I therefore added a renice line to rc.local but rc.local runs before
cron. What is the best way to do this... add a line to edit the daemon
line in /etc/rc.d/cron as needed on startup?
Or did I
On Sat, 21 Mar 2015 14:14:22 -0700
luke...@onemodel.org wrote:
Thanks to all who've commented: this has been educational useful.
Systrace is also an option but the policy writing could be a little
work, the regex support is certainly helpful there.
systrace -A is very helpful
then edit files
On 2015-03-22, T. Ribbrock emga...@gmx.net wrote:
What I cannot seem to get to work is that sensorsd *reacts* to these
changes. Based on the examples in the thread mentioned above, I've
created a small script /etc/sensorsd/upd.sh that looks as follows:
# cat /etc/sensorsd/upd.sh
echo ${@} |
What software you use for this purposes?
On Sat, 21 Mar 2015 11:26:39 + (UTC)
Stuart Henderson s...@spacehopper.org wrote:
On 2015-03-21, Riccardo Mottola riccardo.mott...@libero.it wrote:
Hi,
Brian McCafferty wrote:
Just a serial cable, then you can use tip(1). The connections and
other info are in the V120 user guide
Hi,
Lampshade wrote on Sun, Mar 22, 2015 at 04:56:18PM +0100:
What software you use for this purposes?
when(1), see the productivity/when port.
Yours,
Ingo
On Sun, Mar 22, 2015 at 2:06 PM, Jonathan Gray j...@jsg.id.au wrote:
On Sun, Mar 22, 2015 at 06:49:33AM -0400, Ted Unangst wrote:
Jonathan Gray wrote:
On Sun, Mar 22, 2015 at 09:16:08AM +0100, Stefan Sperling wrote:
If the firmare image is not present at boot, no interface is created.
Kevin Chadwick wrote:
So I could renice the processes cron runs but decided to renice the
whole of cron instead/as well.
I therefore added a renice line to rc.local but rc.local runs before
cron. What is the best way to do this... add a line to edit the daemon
line in /etc/rc.d/cron as
Lampshade lampsh...@poczta.fm writes:
What software you use for this purposes?
I use GNU Emacs with org-mode. Emacs is included in OpenBSD packages.
On Sun, Mar 22, 2015 at 06:27:19PM +0100, Mattieu Baptiste wrote:
On Sun, Mar 22, 2015 at 2:06 PM, Jonathan Gray j...@jsg.id.au wrote:
On Sun, Mar 22, 2015 at 06:49:33AM -0400, Ted Unangst wrote:
Jonathan Gray wrote:
On Sun, Mar 22, 2015 at 09:16:08AM +0100, Stefan Sperling wrote:
On Sun, 22 Mar 2015, Jason Crawford wrote:
I use redmine for project management and that includes a calendar and time
tracking system.
Seconded.
Lee
On Sat, 21 Mar 2015 14:14:22 -0700 luke...@onemodel.org wrote:
On 03/16/15 19:38, Jean-Philippe Ouellet wrote:
On Sun, Mar 15, 2015 at 07:12:23PM -0400, Ted Unangst wrote:
luke...@onemodel.org wrote:
The goal: I'd like to run multiple simultaneous X sessions and switch
among them with
Try radicale, it's in packages.
Il 23/mar/2015 00:42 L. V. Lammert l...@omnitec.net ha scritto:
On Sun, 22 Mar 2015, Jason Crawford wrote:
I use redmine for project management and that includes a calendar and
time
tracking system.
Seconded.
Lee
On Sun, Mar 22, 2015 at 11:03 PM, Jonathan Gray j...@jsg.id.au wrote:
On Sun, Mar 22, 2015 at 06:27:19PM +0100, Mattieu Baptiste wrote:
On Sun, Mar 22, 2015 at 2:06 PM, Jonathan Gray j...@jsg.id.au wrote:
On Sun, Mar 22, 2015 at 06:49:33AM -0400, Ted Unangst wrote:
Jonathan Gray wrote:
On
I use redmine for project management and that includes a calendar and time
tracking system.
On Mar 22, 2015 1:44 PM, Lampshade lampsh...@poczta.fm wrote:
What software you use for this purposes?
26 matches
Mail list logo