VESA mode

[Sébastien Morand]

Hi

I'm using the snapshots version in my computer and for about 2 weeks now
I'm stuck in VESA mode.

I was working pretty well since 26th september for "Intel HD Graphics 5500"
but not anymore, any information about this?

Regards,
Sebastien

dmesg :
OpenBSD 5.9-beta (GENERIC.MP) #1778: Wed Dec 23 18:23:06 MST 2015
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error 80
real mem = 16884772864 (16102MB)
avail mem = 16368922624 (15610MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xacdfd000 (61 entries)
bios0: vendor LENOVO version "J5ET43WW (1.14 )" date 02/10/2015
bios0: LENOVO 20DF004UFR
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC ASF! HPET ECDT APIC MCFG SSDT SSDT SSDT SSDT
SSDT SSDT SSDT SSDT PCCT SSDT UEFI MSDM BATB FPDT UEFI
acpi0: wakeup devices LID_(S3) IGBE(S4) EXP3(S4) XHCI(S3) EHC1(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpiec0 at acpi0
acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-5500U CPU @ 2.40GHz, 798.28 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEA
DLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FS
GSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i7-5500U CPU @ 2.40GHz, 798.15 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEA
DLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FS
GSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i7-5500U CPU @ 2.40GHz, 798.15 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEA
DLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FS
GSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i7-5500U CPU @ 2.40GHz, 798.15 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEA
DLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FS
GSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 40 pins
acpimcfg0 at acpi0 addr 0xf800, bus 0-63
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 5 (PEG_)
acpiprt2 at acpi0: bus 2 (EXP1)
acpiprt3 at acpi0: bus 4 (EXP3)
acpiprt4 at acpi0: bus 6 (EXP6)
acpicpu0 at acpi0: C3(200@233 mwait.1@0x40), C2(200@148 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@233 mwait.1@0x40), C2(200@148 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@233 mwait.1@0x40), C2(200@148 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@233 mwait.1@0x40), C2(200@148 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1
acpipwrres1 at acpi0: AMD3, resource for PEG_
acpipwrres2 at acpi0: AMD2, resource for PEG_
acpitz0 at acpi0: critical temperature is 127 degC
acpibtn0 at acpi0: LID_
acpibat0 at acpi0: BAT0 model "LNV-45N1" serial  2079 type LION oem "SANYO"
acpiac0 at acpi0: AC unit offline
acpithinkpad0 at acpi0
cpu0: Enhanced SpeedStep 798 MHz: speeds: 2401, 2400, 2300, 2100, 2000,
1900, 1700, 1600, 1400, 1300, 1200, 1000, 900, 800, 600, 500 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 5G Host" rev 0x09
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 5500" rev 0x09
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1920x1080
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
azalia0 at pci0 dev 3 function 0 "Intel 

kernel compile error

[Hrvoje Popovski]

Hi,

after fetching source from cvs at 23:40 CET i'm getting this error
whilte comliling kernel.



cc  -Werror -Wall -Wimplicit-function-declaration  -Wno-main
-Wno-uninitialized  -Wframe-larger-than=2047 -mcmode
l=kernel -mno-red-zone -mno-sse2 -mno-sse -mno-3dnow  -mno-mmx
-msoft-float -fno-omit-frame-pointer -fno-builtin-
printf -fno-builtin-snprintf  -fno-builtin-vsnprintf -fno-builtin-log
-fno-builtin-log2 -fno-builtin-malloc -fno
-pie -O2 -pipe -nostdinc -I../../../.. -I. -I../../../../arch -DDDB
-DDIAGNOSTIC -DKTRACE -DACCOUNTING -DKMEMSTAT
S -DPTRACE -DPOOL_DEBUG -DCRYPTO -DSYSVMSG -DSYSVSEM -DSYSVSHM
-DUVM_SWAP_ENCRYPT -DFFS -DFFS2 -DFFS_SOFTUPDATES
-DUFS_DIRHASH -DQUOTA -DEXT2FS -DMFS -DNFSCLIENT -DNFSSERVER -DCD9660
-DUDF -DMSDOSFS -DFIFO -DTMPFS -DFUSE -DSOC
KET_SPLICE -DTCP_SACK -DTCP_ECN -DTCP_SIGNATURE -DINET6 -DIPSEC
-DPPP_BSDCOMP -DPPP_DEFLATE -DPIPEX -DMROUTING -D
MPLS -DBOOT_CONFIG -DUSER_PCICONF -DAPERTURE -DMTRR -DNTFS -DHIBERNATE
-DPCIVERBOSE -DUSBVERBOSE -DWSDISPLAY_COMP
AT_USL -DWSDISPLAY_COMPAT_RAWKBD -DWSDISPLAY_DEFAULTSCREENS="6"
-DWSDISPLAY_COMPAT_PCVT -DX86EMU -DONEWIREVERBOSE
 -DMULTIPROCESSOR -DMAXUSERS=80 -D_KERNEL -MD -MP  -c
../../../../dev/pci/vga_pci_common.c
{standard input}: Assembler messages:
{standard input}:254: Error: no such instruction: `rdseed %rbx'
*** Error 1 in target 'cpu.o'
*** Error 1 in /usr/src/sys/arch/amd64/compile/GENERIC.MP (Makefile:938
'cpu.o')

Re: Panic when copying files

[Thomas Bohl]

For the archive:
I changed the cabling.
RW disk on SATA3_A1
RO disk on SATA3_A2
(Instead of the other way around.)
Now no more kernel panic.

ospfd 224.0.0.5: Can't assign requested address on rdomain 2

[csszep]

Hello!

I created a simple ospf test lab, but i ran into the following error:

The setup:

ospfd.conf

rdomain 2

area 0.0.0.0 {
interface vio2
}


route -T2 -n show
Routing tables

Internet:
DestinationGatewayFlags   Refs  Use   Mtu  Prio
Iface
default127.0.0.1  UGBS   00 32768 8 lo2
127/8  127.0.0.1  UGRS   00 32768 8 lo2
127.0.0.1  127.0.0.1  UHl09 32768 1 lo2
172.16.2/24172.16.2.1 UC 00 - 4 vio2
172.16.2.1 08:00:27:1b:ce:55  UHLl   05 - 1 vio2
172.16.2.255   172.16.2.1 UHb00 - 1 vio2
224/4  127.0.0.1  URS00 32768 8 lo2



 ifconfig

lo0: flags=8049 mtu 32768
priority: 0
groups: lo
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
inet 127.0.0.1 netmask 0xff00
vio0: flags=8843 mtu 1500
lladdr 08:00:27:48:6a:16
priority: 0
groups: egress
media: Ethernet autoselect
status: active
inet 10.0.2.15 netmask 0xff00 broadcast 10.0.2.255
vio1: flags=8843 mtu 1500
lladdr 08:00:27:e8:94:dc
priority: 0
media: Ethernet autoselect
status: active
inet 192.168.56.11 netmask 0xff00 broadcast 192.168.56.255
vio2: flags=8843 rdomain 2 mtu 1500
lladdr 08:00:27:1b:ce:55
priority: 0
media: Ethernet autoselect
status: active
inet 172.16.2.1 netmask 0xff00 broadcast 172.16.2.255
enc0: flags=0<>
priority: 0
groups: enc
status: active
pflog0: flags=141 mtu 33144
priority: 0
groups: pflog
lo2: flags=8049 rdomain 2 mtu 32768
priority: 0
groups: lo
inet 127.0.0.1 netmask 0xff00


ospfd -dvv -f /etc/ospfd2.conf

WARNING: IP forwarding NOT enabled, running as stub router
password = "secret"
warning: macro 'password' not used
startup
if_join_group: error IP_ADD_MEMBERSHIP, interface vio2 address 224.0.0.5:
Can't assign requested address
if_fsm: error changing state for interface vio2, event UP, state DOWN
error starting interface vio2

 ospfctl show interfaces

Interface   AddressState  HelloTimer Linkstate  Uptimenc  ac
vio2172.16.2.1/24  DOWN   -  active 00:00:00   0   0

 ospfctl show fib

flags: * = valid, O = OSPF, C = Connected, S = Static
Flags  Prio Destination  Nexthop
*S8 0.0.0.0/0127.0.0.1
*C0 127.0.0.0/8  link#0
*S8 127.0.0.0/8  127.0.0.1
* 1 127.0.0.1/32 127.0.0.1
*C4 172.16.2.0/24link#3
*S8 224.0.0.0/4  127.0.0.1

ospfctl show summary

Router ID: 10.0.2.15
Uptime: 00:01:33
RFC1583 compatibility flag is disabled
SPF delay is 1000 msec(s), hold time between two SPFs is 5000 msec(s)
Number of external LSA(s) 0 (Checksum sum 0x0)
Number of areas attached to this router: 1

Area ID: 0.0.0.0
  Number of interfaces in this area: 1
  Number of fully adjacent neighbors in this area: 0
  SPF algorithm executed 0 time(s)
  Number LSA(s) 0 (Checksum sum 0x0)


I miss something, or this is a bug?

Thx
Godot

OpenBSD 5.9-beta (GENERIC) #1658: Sun Dec 27 17:03:23 MST 2015
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 520028160 (495MB)
avail mem = 500244480 (477MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xe1000 (10 entries)
bios0: vendor innotek GmbH version "VirtualBox" date 12/01/2006
bios0: innotek GmbH VirtualBox
acpi0 at bios0: rev 2
acpi0: sleep states S0 S5
acpi0: tables DSDT FACP APIC SSDT
acpi0: wakeup devices
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-4310U CPU @ 2.00GHz, 2594.82 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,RDRAND,HV,NXE,LONG,LAHF,ABM,ITSC
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: CPU supports MTRRs but not enabled by BIOS
cpu0: apic clock running at 1000MHz
cpu0: mwait min=64, max=64
ioapic0 at mainbus0: apid 1 pa 0xfec0, version 11, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0: C1(@1 halt!)
acpibat0 at acpi0: BAT0 model "1" serial 0 type VBOX oem "innotek"
acpiac0 at acpi0: AC unit online
acpivideo0 at acpi0: GFX0
pvbus0 at mainbus0: KVM
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
pcib0 at pci0 dev 1 

Re: Mg scroll-up issue in xterm

[Timo Myyrä]

Christian Weisgerber  writes:

> On 2015-12-27, Timo Myyrä  wrote:
>
>> I noticed issue with mg scroll-up keybinding when "xterm*locale: true" is
set in
>> ~/.Xresources.
>> When the above option is set, mg requires that you type C-v C-v to
scroll-up
>> instead of single C-v. I'm not sure if this is bug or feature.
>
> That would be a bug, but I can't reproduce this.

Just did a bit more testing.
After stripping my ~/.Xresources to following:

xterm*loginShell: true
xterm*locale: utf-8

And using 'xrdb ~/.Xresources', opening new xterm I get the expected
behaviour.
If I change the config 's/utf-8/true/', use xrdb to update settings and open
new
Xterm I get the odd behaviour. It doesn't seem to be mg specific. The Xterm
itself shows this. With first config the key combination "^v^m" inserts
literal
^M to shell. With latter config shell does new line as though ^v never
happened.

By looking at Xterm man page seems that locale:true assumes all input is
utf-8
encoded already, with locale:utf-8 xterm uses luit to convert input to utf-8
with it. So input given to xterm isn't utf-8 on OpenBSD and needs luit to
convert it?

Timo

Re: wle200nx WiFi card on apu2b4 - no link

[LÉVAI Dániel]

Kapfhammer, Stefan @ 2015-12-27T22:44:09 +0100:
> Good evening,
> 
> I cannot access hotspot with apu2b4's wle200nx wifi card.
> 
> got ath0: device timeout
[...]

How come it's not athn? Is this the full and only error message?

>From athn(4):
athn0: device timeout  A frame dispatched to the hardware for
transmission did not complete in time.  The driver will reset the
hardware.  This should not happen.

Can you try the minipcie card in an other board, or switch minipcie
slots?

[...]
> -> athn0 at pci4 dev 0 function 0 "Atheros AR9281" rev 0x01: apic 4 int 16
> -> athn0: AR9280 rev 2 (2T2R), ROM rev 22, address 
[...]
> # ifconfig
> 
> athn0: flags=8843 mtu 1500
> lladdr 
> priority: 4
> groups: wlan
> media: IEEE802.11 autoselect (OFDM6 mode 11a)
> status: no network
> ieee80211: nwid  chan 9 wpakey 0x wpaprotos
> wpa2 wpaakms psk wpaciphers ccmp wpagroupcipher tkip
> 
> # cat /etc/hostname.athn0
> 
> nwid TESTNET
> wpakey 'Do!Not-deal+w1th-IT'
> dhcp

I'm using exactly the same minipcie card, in almost the same board
(apu1d), only with -current, and in hostap mode.

Just off the top of my head, you could try to set media to autoselect,
and make sure that you use the right mode:

# ifconfig athn0 media
[...]
supported media:
media autoselect
media autoselect mediaopt hostap
media autoselect mediaopt monitor
media autoselect mode 11a
media autoselect mode 11a mediaopt hostap
media autoselect mode 11a mediaopt monitor
media autoselect mode 11b
media autoselect mode 11b mediaopt hostap
media autoselect mode 11b mediaopt monitor
media autoselect mode 11g
media autoselect mode 11g mediaopt hostap
media autoselect mode 11g mediaopt monitor


The one and only problem with my WLE card was that I set the mode to 11g
before setting it to a 5GHz channel, and that combo does not exist, and
I could not set it back without a reboot. But other than that, it is
performing really well, set to 11a and 5GHz.


Daniel

-- 
LÉVAI Dániel
PGP key ID = 0x83B63A8F
Key fingerprint = DBEC C66B A47A DFA2 792D  650C C69B BE4C 83B6 3A8F

audio capturing

[Kirill]

Hello!

I want to capture audio from another app to file or simply stdout. How
can I do this?

Thanks.

Re: audio capturing

[Jan Stary]

On Dec 28 16:46:24, nightl...@nightbbs.ru wrote:
> I want to capture audio from another app to file or simply stdout. How
> can I do this?

It woould be easier to help you you just said what "app" it is
and how it produces "audio".

Re: audio capturing

[Kirill]

On 12/28/15 17:21, Jan Stary wrote:
> On Dec 28 16:46:24, nightl...@nightbbs.ru wrote:
>> I want to capture audio from another app to file or simply stdout. How
>> can I do this?
> It woould be easier to help you you just said what "app" it is
> and how it produces "audio".

i want to capture with ffmpeg from dosbox (no, internal dosbox capture
don't need)

Re: Mg scroll-up issue in xterm

[Tati Chevron]

We are seeing too much of your emails


Your rudeness is crass and inappropriate.

You are not obliged to read any of my posts to this or any other
mailing list.

Other people have read them, and that is why, besides other things, 
certain ports now build correctly with systrace enabled that didn't

build before, and the terminfo file actually contains correctly working
entries for the framebuffer console.

--
Tati Chevron
Perl and FORTRAN specialist.
SWABSIT development and migration department.
http://www.swabsit.com

Re: Panic when copying files

[Thomas Bohl]

I tried EFI for a change. Same panic there:

# time cp -R /mnt/BackupDisk/Tag.0/a/b/c/* /home/c
panic: kernel diagnostic assertin "(cmd & AHCI_PREG_CMD_CR) == 0"
failed: files "../../../../dev/ic/ahci.c", line 2513
wsdisplay_switch2: not switching
Stopped at  Debugger+0x9:   leave
   TIDPIDUID PRFLAGS PFLAGS  CPU  COMMAND
Debugger() at Debugger+0x9
panic() at panic+0xfe
__assert() at __assert+0x25
ahci_port_read_ncp_error() at ahci_port_read_ncp_error+0x251
ahci_port_intr() at ahci_port_intr+0x73c
ahci_intr() at ahci_intr+0x5b
intr_handler() at intr_handler+0x67
Xintr_ioapic_edge23() at Xintr_ioapic_ewdsgdei2s3p+10axyc_9s
h-i-n-g  tc
h-i-n-g interrupt ---tc
tacchp2i:c pnuo_ti dslwei(t)c haitn ga
dw   2
:c pnuo_ti dslwei_tccyhcilneg(
cle+0x10  y
end trace frame: 0x0, count: 5

ddb{0}> trace
Debugger() at Debugger+0x9
panic() at panic+0xfe
__assert() at __assert+0x25
ahci_port_read_ncp_error() at ahci_port_read_ncp_error+0x251
ahci_port_intr() at ahci_port_intr+0x73c
ahci_intr() at ahci_intr+0x5b
intr_handler() at intr_handler+0x67
Xintr_ioapic_edge23() at Xintr_ioapic_edge23+0xc9
--- interrupt ---
acpicpu_idle() at acpicpu_idle+0x22d
cpu_idle_cycle() at cpu_idle_cycle+0x10
end trace frame: 0x0, count: -10

ddb{0}> mach ddbcpu 1
Stopped at  Debugger+0x9:   leave
Debugger() at Debugger+0x9
x86_ipi_handler() at x86_ipi_handler+0x76
Xresume_lapic_ipi()at Xresume_lapic_ipi+0x1c
--- interrupt ---
acpicpu_idle() at acpicpu_idle+0x22d
cpu_idle_cycle() at cpu_idle_cycle+0x10
end trace frame: 0x0, count: 10
ddb{1}> trace
Debugger() at Debugger+0x9
x86_ipi_handler() at x86_ipi_handler+0x76
Xresume_lapic_ipi() at Xresume_lapic_ipi+0x1c
--- interrupt ---
acpicpu_idle() at acpicpu_idle+0x22d
cpu_idle_cycle() at cpu_idle_cycle+0x10
end trace frame: 0x0, count: -5

ddb{1}> mach ddbcpu 2
Stopped at  Debugger+0x9:   leave
Debugger() at Debugger+0x9
x86_ipi_handler() at x86_ipi_handler+0x76
Xresume_lapic_ipi()at Xresume_lapic_ipi+0x1c
--- interrupt ---
acpicpu_idle() at acpicpu_idle+0x22d
cpu_idle_cycle() at cpu_idle_cycle+0x10
end trace frame: 0x0, count: 10
ddb{2}> trace
Debugger() at Debugger+0x9
x86_ipi_handler() at x86_ipi_handler+0x76
Xresume_lapic_ipi() at Xresume_lapic_ipi+0x1c
--- interrupt ---
acpicpu_idle() at acpicpu_idle+0x22d
cpu_idle_cycle() at cpu_idle_cycle+0x10
end trace frame: 0x0, count: -5

ddb{2}> mach ddbcpu 3
Stopped at  Debugger+0x9:   leave
Debugger() at Debugger+0x9
x86_ipi_handler() at x86_ipi_handler+0x76
Xresume_lapic_ipi()at Xresume_lapic_ipi+0x1c
--- interrupt ---
acpicpu_idle() at acpicpu_idle+0x22d
cpu_idle_cycle() at cpu_idle_cycle+0x10
end trace frame: 0x0, count: 10
ddb{3}> trace
Debugger() at Debugger+0x9
x86_ipi_handler() at x86_ipi_handler+0x76
Xresume_lapic_ipi() at Xresume_lapic_ipi+0x1c
--- interrupt ---
acpicpu_idle() at acpicpu_idle+0x22d
cpu_idle_cycle() at cpu_idle_cycle+0x10
end trace frame: 0x0, count: -5

ddb{3}> ps
   TID   PPID   PGRPUID  S   FLAGS  WAIT   COMMAND
  8960  15339   8960  0  3 0x3  bioait cp
 16465  18320  16465  0  30x83  poll   systat
 26860  0  0  0  3 0x14200  bored  srdis
 22457  1  22457  0  30x100083  ttyin  getty
 10940  1  10940  0  30x100083  ttyin  getty
 30641  1  30641  0  30x100083  ttyin  getty
 18320  1  18320  0  30x10008b  pause  ksh
 15339  1  15339  0  30x10008b  pause  ksh
  2381  1   2381  0  30x100098  pool   cron
 14885  1  14885 99  30x100090  pool   sndiod
 25921  1  25921110  30x100090  pool   sndiod
 19894  26249  26249 95  30x100090  kqread smtpd
 19281  26249  26249 95  30x100090  kqread smtpd
 10089  26249  26249 95  30x100090  kqread smtpd
 25084  26249  26249 95  30x100090  kqread smtpd
 24862  26249  26249 95  30x100090  kqread smtpd
 15496  26249  26249103  30x100090  kqread smtpd
 26249  1  26249  0  30x100090  kqread smtpd
 16966  1  16966  0  30x80  select sshd
 22068  28619  22385 83  30x100090  poll   ntpd
 28619  22385  22385 83  30x100090  poll   ntpd
 22385  1  22385  0  30x100080  poll   ntpd
  9328  28932  28932 74  30x100090  bpfpflogd
 28932  1  28932  0  30x80  netio  pflogd
  5510   9277   9277 73  30x100090  kqread syslogd
  9277  1   9277  0  30x100080  netio  syslogd
 12989  1  12989 77  30x100090  poll   dhclient
 28690  1  28690  0  30x80  poll   dhclient
 23316  0  0  0  3 0x14200  pgzero zerothread
  2296  0  0  0  3 0x14200  

Adding a new Polish BUG to groups list

[Frederic Cambus]

Hi misc@,

Here is a filled template for a new user group submission. We are
based in Poland, and targeting the Podkarpackie Voivodeship.

0
C Poland
P Podkarpackie
T Rzeszow 
F Irregular
O SBUG
I Frederic Cambus
M 
U http://www.sbug.org/
N OpenBSD, *BSD

Thanks in advance!

Cheers,
Frederic

Re: libGL error: failed to open drm device: Permission denied

[Mihai Popescu]

Well, things were sorted out.

Looking at that /etc/fbtab file Jonathan Gray pointed out (and yes,
this is not a typo of /etc/fstab like I thought before) I can spot the
/dev/drm0 in that long list of devices prepared for chown at login.

But, that file is filled in for ttyC0 only, the tty that most users
are using it for login. But, giving the fact that I got some annoying
kernel messages from my connecting/disconnecting USB mouse with
aggresive power management routines, I was using ttyC1 for login. From
that things got another way. I think this clarifies the other issue of
changing tty / ownership change mentioned in this thread by somebody
else.

So the error was not really an error, going back to ttyC0 login I got
the right permission and the messages are no more. Of course I can
edit the /etc/fbtab, too.

One question please: is it right that not getting access to /dev/drm0
is like losing hardware acceleration for applications using it?

Thanks.

Re: libGL error: failed to open drm device: Permission denied

[lists]

Mon, 28 Dec 2015 00:25:25 +0200 Mihai Popescu 
> libGL error: failed to open drm device: Permission denied
> libGL error: failed to load driver: r600
> 
> Is it normal, can it be fixed on my side?

Quick and dirty hack around this (if your user is in group wheel):

$ grep chmod .xinitrc
sudo chmod g+rw /dev/drm0

$ ls -l /dev/drm*

Any other suggestions, and moreover proper way to address this?

Re: libGL error: failed to open drm device: Permission denied

[Mihai Popescu]

> Can you include the output of ls -l /dev/drm0 and
> the contents of /var/log/Xorg.0.log ?

$ ls -l /dev/drm0
crw---  1 root  wheel   87,   0 Dec 11 20:39 /dev/drm0

$ more /var/log/Xorg.0.log
[46.215] (WW) checkDevMem: failed to open /dev/xf86 and /dev/mem
(Operation not permitted)
Check that you have set 'machdep.allowaperture=1'
in /etc/sysctl.conf and reboot your machine
refer to xf86(4) for details
[46.215]linear framebuffer access unavailable
[46.221] (--) Using wscons driver on /dev/ttyC4 in pcvt
compatibility mode (version 3.32)
[47.345]
X.Org X Server 1.17.4
Release Date: 2015-10-28
[47.345] X Protocol Version 11, Revision 0
[47.345] Build Operating System: OpenBSD 5.8 amd64
[47.345] Current Operating System: OpenBSD thinkc.my.domain 5.8
GENERIC.MP#1739 amd64
[47.346] Build Date: 11 December 2015  07:02:02AM
[47.346]
[47.346] Current version of pixman: 0.32.8
[47.346]Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[47.346] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[47.346] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Dec 28
17:22:45 2015
[47.376] (==) Using system config directory
"/usr/X11R6/share/X11/xorg.conf.d"
[47.383] (==) No Layout section.  Using the first Screen section.
[47.383] (==) No screen section available. Using defaults.
[47.383] (**) |-->Screen "Default Screen Section" (0)
[47.383] (**) |   |-->Monitor ""
[47.384] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[47.384] (==) Disabling SIGIO handlers for input devices
[47.384] (==) Automatically adding devices
[47.384] (==) Automatically enabling devices
[47.384] (==) Not automatically adding GPU devices
[47.488] (==) FontPath set to:
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF/,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/
[47.488] (==) ModulePath set to "/usr/X11R6/lib/modules"
[47.488] (II) The server relies on wscons to provide the list of
input devices.
If no devices become available, reconfigure wscons or disable
AutoAddDevices.
[47.488] (II) Loader magic: 0x10a6b3131ce0
[47.488] (II) Module ABI versions:
[47.488]X.Org ANSI C Emulation: 0.4
[47.488]X.Org Video Driver: 19.0
[47.488]X.Org XInput driver : 21.0
[47.488]X.Org Server Extension : 9.0
[47.489] (--) PCI:*(0:1:5:0) 1002:9715:17aa:3082 rev 0, Mem @
0xd000/268435456, 0xfe90/65536, 0xfe80/1048576, I/O @
0xe000/256
[47.489] (II) LoadModule: "glx"
[47.503] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[47.581] (II) Module glx: vendor="X.Org Foundation"
[47.581]compiled for 1.17.4, module version = 1.0.0
[47.581]ABI class: X.Org Server Extension, version 9.0
[47.581] (==) AIGLX enabled
[47.582] (==) Matched ati as autoconfigured driver 0
[47.582] (==) Matched vesa as autoconfigured driver 1
[47.582] (==) Assigned the driver to the xf86ConfigLayout
[47.582] (II) LoadModule: "ati"
[47.582] (II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.so
[47.607] (II) Module ati: vendor="X.Org Foundation"
[47.607]compiled for 1.17.4, module version = 7.5.0
[47.607]Module class: X.Org Video Driver
[47.607]ABI class: X.Org Video Driver, version 19.0
[47.607] (II) LoadModule: "radeon"
[47.608] (II) Loading /usr/X11R6/lib/modules/drivers/radeon_drv.so
[47.626] (II) Module radeon: vendor="X.Org Foundation"
[47.626]compiled for 1.17.4, module version = 7.5.0
[47.626]Module class: X.Org Video Driver
[47.626]ABI class: X.Org Video Driver, version 19.0
[47.627] (II) LoadModule: "vesa"
[47.627] (II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.so
[47.636] (II) Module vesa: vendor="X.Org Foundation"
[47.636]compiled for 1.17.4, module version = 2.3.3
[47.636]Module class: X.Org Video Driver
[47.636]ABI class: X.Org Video Driver, version 19.0
[47.636] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
 

Re: Mg scroll-up issue in xterm

[lists]

> On Sun, Dec 27, 2015 at 06:21:41PM +0200, Timo Myyrä wrote:
> I noticed issue with mg scroll-up keybinding when "xterm*locale:
> true" is set in ~/.Xresources.
> When the above option is set, mg requires that you type C-v C-v to
> scroll-up

I have this in .Xdefaults and don't have to press any of the scroll
keys twice:

XTerm*locale: utf8

I also have the locale(1) for character set to this:

LC_CTYPE=en_US.UTF-8

> On Sun, Dec 27, 2015 at 06:21:41PM +0200, Timo Myyrä wrote:
> instead of single C-v. I'm not sure if this is bug or feature.

What date is the snapshot you're running?

Here C-v goes down in mg and M-v goes up (as intended), are you using
default key bindings for mg?

Any window manager / terminal emulator key bindings that might
interfere?

---8<--- skip below ---8<---

Accompanying info about scrolling direction.  According to the mg(1)
man page [1] they should be:

C-v scroll-up
M-v scroll-down

scroll-up
  Scroll forward one page.  A two-line overlap between pages is
  assumed.  If given a repeat argument, scrolls back lines, not
  pages.

scroll-down
  Scroll backwards n pages.  A two-line overlap between pages is
  assumed.  If given a repeat argument, scrolls back lines, not
  pages.

[1]http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man1/mg.1

If your intuition told you scroll-up would go up, it's the other way
in reality, and it goes down.

The mg(1) tutorial [2] says this:

>> Try using M-v and C-v to move up and down, one page at a time.

[2]http://cvsweb.openbsd.org/cgi-bin/cvsweb/~checkout~/src/usr.bin/mg/tutoria
l

Again more intuitive would be to have it phrased (as the order you
would need them, and the order in which they come on the man page):

>> Try using C-v and M-v to move down and up, one page at a time.

The man page got them in the right order definition, but the meaning
scroll-up going forward (is down) and scroll-down going backward (is
up) similar to the Emacs manual [3] quote:

You can also scroll explicitly with these commands:

C-v
next
PageDown
  Scroll forward by nearly a full window (scroll-up-command).

M-v
prior
PageUp
  Scroll backward (scroll-down-command).

C-v (scroll-up-command) scrolls forward by nearly the whole window
height.  The effect is to take the two lines at the bottom of the
window and put them at the top, followed by lines that were not
previously visible.  If point was in the text that scrolled off the
top, it ends up on the window’s new topmost line.  The next (or
PageDown) key is equivalent to C-v.

M-v (scroll-down-command) scrolls backward in a similar way.  The prior
(or PageUp) key is equivalent to M-v.

[3]http://www.gnu.org/software/emacs/manual/html_node/emacs/Scrolling.html

Think about rolling a long paper sheet between two drum rolls, so that
the scroll-up-command means activate the upper drum of the paper
scroll, text goes up, you move forward down the file.

One can find this in the CVS tree for mg and probably fix the tutorial
page to be more common sense like the man page, and optionally make
clearer the man page wording for the directions of movement, though
it's not "that" necessary.

Sun, 27 Dec 2015 17:37:21 + Tati Chevron 
> ^V is traditionally used on UNIX like systems to 'insert the next
> character literally', for example if you type Control-V, Enter at the
> shell, you will produce ^M, or Control-V, Backspace will produce ^?
> which is a backspace character.

General knowledge, probably not relevant in this case though increases
chance you make a mistake suggesting something.

Concentrate on the man pages, included docs, FAQs, sources, mailing
list threads etc before giving quick common suggestions just to say
something, even if this is correct.

Sun, 27 Dec 2015 17:37:21 + Tati Chevron 
> This is what you are seeing, the first Control-v is swallowed before
> reaching mg.

How are you sure this is what's happening, have you debugged this in
reality, can you point code sections responsible for this?  Please try
it first before advising.  Try to replicate it.

We are seeing too much of your emails in every other thread, Mr. Tati
Chevron, looks more like an advertisement for your employment company
in the email signature all over the place, on the OpenBSD mailing lists
like a know it all but did not participate in it person.  Please don't
respond to this challenge, act accordingly.

Re: VESA mode

[Thomas Weinbrenner]

Am Mon, 28 Dec 2015 17:53:45 +
schrieb Sébastien Morand :

> I'm using the snapshots version in my computer and for about 2 weeks
> now I'm stuck in VESA mode.
>
> I was working pretty well since 26th september for "Intel HD Graphics
> 5500" but not anymore, any information about this?

http://marc.info/?l=openbsd-cvs=145068713628147

|CVSROOT:   /cvs
|Module name:   xenocara
|Changes by:kette...@cvs.openbsd.org2015/12/21 01:37:11
|
|Modified files:
|   xserver/hw/xfree86/common: xf86pciBus.c
|
|Log message:
|On Broadwell, default to using the modesetting driver.  Our KMS support
|on Broadwell is still a bit weak and the modesetting driver seems to
|work better than the intel driver, while still providing 3D
|acceleration and video playback support.
|
|ok phessler@, matthieu@, jsg@

You can of course override this in you xorg.conf

I prefer the Intel driver too (even if it isn't always stable) so I
created a small /etc/X11/xorg.conf:

 Section "Device"
Identifier "Intel"
Driver "intel"
 EndSection

Re: audio capturing

[Jan Stary]

On Dec 28 17:45:40, nightl...@nightbbs.ru wrote:
> On 12/28/15 17:21, Jan Stary wrote:
> > On Dec 28 16:46:24, nightl...@nightbbs.ru wrote:
> >> I want to capture audio from another app to file or simply stdout. How
> >> can I do this?
> > It woould be easier to help you you just said what "app" it is
> > and how it produces "audio".
> 
> i want to capture with ffmpeg from dosbox

If you are running sndiod, then dosbox is a client to sndiod.
With an appropriate sndiod command line, you should be able
to capture all of dosbox's output (or any sound output,
for that matter) to a file. You might benefit from reading
Alex Ratchov's posts to this list in particular.

System hangs at setting tty flags

[Mik J]

Hello,
I just did a fresh install with OpenBSD 5.8 and an ASUS motherboard Z97-P
The installation went fine but then from the first boot it hangs at "setting 
tty flags" this is just after the partitions are fsck'edI searched on search 
engines and found that people running Openbsd as a VM disable the mpbios
I did that but no luck, I'm not using Openbsd as a VM, it's running on a 
physical hardware.
Do you have any idea on how to debug this situation ?
Thanks

Re: kernel compile error

[Hrvoje Popovski]

On 28.12.2015. 23:44, Hrvoje Popovski wrote:
> Hi,
> 
> after fetching source from cvs at 23:40 CET i'm getting this error
> whilte comliling kernel.
> 
> 
> 
> cc  -Werror -Wall -Wimplicit-function-declaration  -Wno-main
> -Wno-uninitialized  -Wframe-larger-than=2047 -mcmode
> l=kernel -mno-red-zone -mno-sse2 -mno-sse -mno-3dnow  -mno-mmx
> -msoft-float -fno-omit-frame-pointer -fno-builtin-
> printf -fno-builtin-snprintf  -fno-builtin-vsnprintf -fno-builtin-log
> -fno-builtin-log2 -fno-builtin-malloc -fno
> -pie -O2 -pipe -nostdinc -I../../../.. -I. -I../../../../arch -DDDB
> -DDIAGNOSTIC -DKTRACE -DACCOUNTING -DKMEMSTAT
> S -DPTRACE -DPOOL_DEBUG -DCRYPTO -DSYSVMSG -DSYSVSEM -DSYSVSHM
> -DUVM_SWAP_ENCRYPT -DFFS -DFFS2 -DFFS_SOFTUPDATES
> -DUFS_DIRHASH -DQUOTA -DEXT2FS -DMFS -DNFSCLIENT -DNFSSERVER -DCD9660
> -DUDF -DMSDOSFS -DFIFO -DTMPFS -DFUSE -DSOC
> KET_SPLICE -DTCP_SACK -DTCP_ECN -DTCP_SIGNATURE -DINET6 -DIPSEC
> -DPPP_BSDCOMP -DPPP_DEFLATE -DPIPEX -DMROUTING -D
> MPLS -DBOOT_CONFIG -DUSER_PCICONF -DAPERTURE -DMTRR -DNTFS -DHIBERNATE
> -DPCIVERBOSE -DUSBVERBOSE -DWSDISPLAY_COMP
> AT_USL -DWSDISPLAY_COMPAT_RAWKBD -DWSDISPLAY_DEFAULTSCREENS="6"
> -DWSDISPLAY_COMPAT_PCVT -DX86EMU -DONEWIREVERBOSE
>  -DMULTIPROCESSOR -DMAXUSERS=80 -D_KERNEL -MD -MP  -c
> ../../../../dev/pci/vga_pci_common.c
> {standard input}: Assembler messages:
> {standard input}:254: Error: no such instruction: `rdseed %rbx'
> *** Error 1 in target 'cpu.o'
> *** Error 1 in /usr/src/sys/arch/amd64/compile/GENERIC.MP (Makefile:938
> 'cpu.o')
> 
> 
> 
> 


please ignore .. everything what i need to know is here
http://www.openbsd.org/faq/current.html
under
2015/12/27 - amd64 and i386 support for rdseed instruction

Re: wle200nx WiFi card on apu2b4 - athn0: device timeout

[Kapfhammer, Stefan]

Hello Dániel,

thank you for your reply. I changed from PCIe slot 1 to PCie slot 2 - same
result.
got athn0: device timeout. (Sorry forgot the "n" in error msg in first post)
I tried also to set media with

- media autoselect
- media autoselect mode 11g
- media DS1 mode 11g

but won't work. I will give -current a try, but that's not the right way
for a production system.

Friendly regards,

Stefan

-Ursprüngliche Nachricht-
Von: LÉVAI Dániel [mailto:l...@ecentrum.hu]
Gesendet: Montag, 28. Dezember 2015 15:10
An: Kapfhammer, Stefan 
Cc: misc@openbsd.org
Betreff: Re: wle200nx WiFi card on apu2b4 - no link

Kapfhammer, Stefan @ 2015-12-27T22:44:09 +0100:
> Good evening,
>
> I cannot access hotspot with apu2b4's wle200nx wifi card.
>
> got ath0: device timeout
[...]

How come it's not athn? Is this the full and only error message?

>From athn(4):
athn0: device timeout  A frame dispatched to the hardware for
transmission did not complete in time.  The driver will reset the
hardware.  This should not happen.

Can you try the minipcie card in an other board, or switch minipcie slots?

[...]
> -> athn0 at pci4 dev 0 function 0 "Atheros AR9281" rev 0x01: apic
> -> 4 int 16
> -> athn0: AR9280 rev 2 (2T2R), ROM rev 22, address 
[...]
> # ifconfig
>
> athn0: flags=8843 mtu 1500
> lladdr 
> priority: 4
> groups: wlan
> media: IEEE802.11 autoselect (OFDM6 mode 11a)
> status: no network
> ieee80211: nwid  chan 9 wpakey 0x
> wpaprotos
> wpa2 wpaakms psk wpaciphers ccmp wpagroupcipher tkip
>
> # cat /etc/hostname.athn0
>
> nwid TESTNET
> wpakey 'Do!Not-deal+w1th-IT'
> dhcp

I'm using exactly the same minipcie card, in almost the same board (apu1d),
only with -current, and in hostap mode.

Just off the top of my head, you could try to set media to autoselect, and
make sure that you use the right mode:

# ifconfig athn0 media
[...]
supported media:
media autoselect
media autoselect mediaopt hostap
media autoselect mediaopt monitor
media autoselect mode 11a
media autoselect mode 11a mediaopt hostap
media autoselect mode 11a mediaopt monitor
media autoselect mode 11b
media autoselect mode 11b mediaopt hostap
media autoselect mode 11b mediaopt monitor
media autoselect mode 11g
media autoselect mode 11g mediaopt hostap
media autoselect mode 11g mediaopt monitor


The one and only problem with my WLE card was that I set the mode to 11g
before setting it to a 5GHz channel, and that combo does not exist, and I
could not set it back without a reboot. But other than that, it is
performing really well, set to 11a and 5GHz.


Daniel

--
LÉVAI Dániel
PGP key ID = 0x83B63A8F
Key fingerprint = DBEC C66B A47A DFA2 792D  650C C69B BE4C 83B6 3A8F

[demime 1.01d removed an attachment of type application/pkcs7-signature which 
had a name of smime.p7s]

Re: libGL error: failed to open drm device: Permission denied

[lists]

Mon, 28 Dec 2015 19:50:42 +0200 Mihai Popescu 
> But, that file is filled in for ttyC0 only, the tty that most users
> are using it for login. But, giving the fact that I got some annoying
> kernel messages from my connecting/disconnecting USB mouse with
> aggresive power management routines, I was using ttyC1 for login.

Similar here, not using anywhere ttyC0, rather tty00 and ttyC1 to
ttyC5.  Confirmed the /etc/fbtab lines for these ttys worked as
expected in these cases.

> So the error was not really an error, going back to ttyC0 login I got
> the right permission and the messages are no more. Of course I can
> edit the /etc/fbtab, too.

Interesting if you ssh log in to startx, e.g. ttyp0, does this work
in /etc/fbtab and is it expected to in this case?

> One question please: is it right that not getting access to /dev/drm0
> is like losing hardware acceleration for applications using it?

Yes, on a drm(4) supported device.  You could confirm this with the
demo glxgears(1).

Binding ^T to status

[Tati Chevron]

The installation ramdisk kernel, binds ^T to status by default, which
is quite useful.

We don't set this up by default on a standard install, though.

Admittedly it's easy to add, but is there a reason for it's inclusion
in the ramdisk kernel, and not elsewhere?  I can understand removing
features to reduce kernel site on the installation media, but that
clearly doesn't apply in this case.

Presumably consistency between terminal behaviour during install and
the defaults for a newly installed system is a good thing?

--
Tati Chevron
Perl and FORTRAN specialist.
SWABSIT development and migration department.
http://www.swabsit.com

Re: TCL in a chroot

[dan mclaughlin]

On Mon, 28 Dec 2015 19:53:47 -0500 Paul Pereira  wrote:
> Has anyone had luck running tcl within a chroot? I have the required
> libraries reported by ldd in place, but the interpreter cannot find
> them.
> 
> # chroot /var/www /usr/local/bin/tclsh8.5
> /usr/local/bin/tclsh8.5: can't load library 'libtcl85.so.1.7'
> 
> # ldd `which tclsh8.5`
> /usr/local/bin/tclsh8.5:
> StartEnd  Type Open Ref GrpRef Name
> 1a646000 3a64a000 exe  10   0  /usr/local/bin/tclsh8.5
> 0c0e6000 2c105000 rlib 01   0  /usr/local/lib/libtcl85.so.1.7
> 0a26d000 2a276000 rlib 02   0  /usr/lib/libm.so.9.0
> 0ce86000 2cea4000 rlib 01   0  /usr/lib/libc.so.80.1
> 02688000 02688000 rtld 01   0  /usr/libexec/ld.so
> 
> # ls /var/www/usr/local/lib/libtcl85.so.1.7
> /var/www/usr/local/lib/libtcl85.so.1.7
> 
> Regards,
> Paul
> 

have you run ldconfig?

i do the following to set up my chroots (_jailroot=/var/www in your case)

sudo mkdir $_jailroot/{sbin,usr/libexec}
sudo cp -p /sbin/ldconfig $_jailroot/sbin
sudo cp -p /usr/libexec/ld.so $_jailroot/usr/libexec
sudo chroot $_jailroot ldconfig /usr/{,X11R6,local}/lib

that should create /var/www/var/run/ld.so.hints which aids the linker in
locating the shared libs.

Re: TCL in a chroot

[Paul Pereira]

> have you run ldconfig?
...
> that should create /var/www/var/run/ld.so.hints which aids the linker in
> locating the shared libs.

Thanks Dan, I hadn't.

TCL in a chroot

[Paul Pereira]

Has anyone had luck running tcl within a chroot? I have the required
libraries reported by ldd in place, but the interpreter cannot find
them.

# chroot /var/www /usr/local/bin/tclsh8.5
/usr/local/bin/tclsh8.5: can't load library 'libtcl85.so.1.7'

# ldd `which tclsh8.5`
/usr/local/bin/tclsh8.5:
StartEnd  Type Open Ref GrpRef Name
1a646000 3a64a000 exe  10   0  /usr/local/bin/tclsh8.5
0c0e6000 2c105000 rlib 01   0  /usr/local/lib/libtcl85.so.1.7
0a26d000 2a276000 rlib 02   0  /usr/lib/libm.so.9.0
0ce86000 2cea4000 rlib 01   0  /usr/lib/libc.so.80.1
02688000 02688000 rtld 01   0  /usr/libexec/ld.so

# ls /var/www/usr/local/lib/libtcl85.so.1.7
/var/www/usr/local/lib/libtcl85.so.1.7

Regards,
Paul