Hello,
I tried this work for me.
1. Install openbsd (basic packages:- bsd,bsd.rd and basexx.tgz) in a usb
drive2. use the newly installed usb drive to boot up the system and then shut
it down.3. use other openbsd system to delete all the contents of the usb drive
except bsd.rd, bsd, boot. Then
I understand that this command:
# pfctl -t spam -T expire
Takes in care the "Cleared" date:
# pfctl -t spam -vT show
___.___.22.65
Cleared: Mon May 25 16:10:22 2020
___.___.167.62
Cleared: Mon May 25 16:10:22 2020
[...]
Is there a way to save and
On 26/05/2020 15.34, Kanto Andria wrote:
Hello,
man ndp is probably another solution
This is the correct way since it is v6 :)
/T
shouldn’t sysupgrade default to use the disk where bad.rd launched from?
I assume it’s the same disk that was running the system before boot.
This would be ideal default behaviour since this is an upgrade.
regards
> On 25 May 2020, at 18:26, Nick Holland wrote:
>
> On 2020-05-25 10:21, Why
On Mon, May 25, 2020 at 04:51:51PM +0200, Antoine Jacoutot wrote:
> > ...
> > It looks as if the file has been sorted e.g.
> Did you use rcctl(8) ?
Hi Antoine,
You are correct, that does it. I checked the history and after the
upgrade I had run rcctl to enable sensorsd. Just tested it again
On 26/05/2020 11.38, Demi M. Obenour wrote:
What is the OpenBSD equivalent to this Linux command?
ip neighbor add 2001:db8::1 dev xnf0 lladdr fe:ff:ff:ff:ff:ff router nud
permanent
It doesn’t need to be a single command. If the existing userspace
tooling does not support this, is it possible
Hello there dear OpenBSD fellows.
I would like to change default 404 page in httpd(8), and I've seen in this
list that in past versions is hardcoded into the C sources.
Now it's possible in httpd.conf(5) ?
Very nice regards,
RG.
--
Name: Riccardo Giuntoli
Email: tag...@gmail.com
Location:
What is the OpenBSD equivalent to this Linux command?
ip neighbor add 2001:db8::1 dev xnf0 lladdr fe:ff:ff:ff:ff:ff router nud
permanent
It doesn’t need to be a single command. If the existing userspace
tooling does not support this, is it possible to do it via the
kernel APIs?
Sincerely,
On Tue, May 26, 2020 at 05:16:44PM +0200, Why 42? The lists account. wrote:
>
> On Mon, May 25, 2020 at 04:51:51PM +0200, Antoine Jacoutot wrote:
> > > ...
> > > It looks as if the file has been sorted e.g.
> > Did you use rcctl(8) ?
>
> Hi Antoine,
>
> You are correct, that does it. I checked
Fair enough. Thanks for the information.
I will look at doing some profiling to figure out what the routing
bottleneck is instead of going off a hunch.
On Tue, May 26, 2020 at 5:13 PM Theo de Raadt wrote:
>
> And by the way, if it is *just routing* -- in the kernel -- then
> neither Meltdown NOR
On Tue, May 26, 2020 at 11:25:21PM +0200, Anders Andersson wrote:
> On Tue, May 26, 2020 at 2:14 PM Walter Alejandro Iglesias
> wrote:
> >
> > I understand that this command:
> >
> > # pfctl -t spam -T expire
> >
> > Takes in care the "Cleared" date:
> >
> > # pfctl -t spam -vT show
> >
Would there be any interest in having a sysctl to enable/disable
meltdown and mds mitigations?
I was poking around 'sys/arch/amd64/amd64/cpu.c' and it appears that
these mitigations are currently hardcoded.
The benefit of having these sysctl's is that they would allow users to
disable the
Absolutely no interest at all.
Not interested in the source code complexity (it is worse than you
think), nor do we believe people's ability to make correct decisions
in regards to complicated security issues.
dhcpd, you say...
Elias Carter wrote:
> Would there be any interest in having a
And by the way, if it is *just routing* -- in the kernel -- then
neither Meltdown NOR MDS are involved in what you perceive as
performance problems, since those only happen upon *context switch
to/from userland*.
As I was saying... we don't want to provide these knobs for people who
cannot make
On Tue, May 26, 2020 at 2:14 PM Walter Alejandro Iglesias
wrote:
>
> I understand that this command:
>
> # pfctl -t spam -T expire
>
> Takes in care the "Cleared" date:
>
> # pfctl -t spam -vT show
> ___.___.22.65
> Cleared: Mon May 25 16:10:22 2020
> ___.___.167.62
>
On Mon, May 25, 2020 at 12:26:43PM -0400, Nick Holland wrote:
> While OpenBSD itself is great about using duids, those are defined in
> the 'a' partition of the boot disk..which is usually the first disk. But
> in your case, the "first disk" doesn't include the 'a' partitionand the
> /etc/fstab
No, it's not.
But that would be nice, at least to suggest a link to à search page for a lost
user. For now, you have to modify sources and compile again.
Le 26 mai 2020 17:34:11 GMT+02:00, Riccardo Giuntoli a écrit
:
>Hello there dear OpenBSD fellows.
>
>I would like to change default 404
On 2020-05-26 09:34, Kanto Andria wrote:
> Hello,
> man ndp is probably another solution
>
> On Tuesday, May 26, 2020, 9:17:25 a.m. EDT, Tommy Nevtelen
> wrote:
>
> On 26/05/2020 11.38, Demi M. Obenour wrote:
>> What is the OpenBSD equivalent to this Linux command?
>>
>> ip neighbor
Hello,
man ndp is probably another solution
On Tuesday, May 26, 2020, 9:17:25 a.m. EDT, Tommy Nevtelen
wrote:
On 26/05/2020 11.38, Demi M. Obenour wrote:
> What is the OpenBSD equivalent to this Linux command?
>
> ip neighbor add 2001:db8::1 dev xnf0 lladdr fe:ff:ff:ff:ff:ff router
Do it in hostname.if. You’ll win the race.
> On May 26, 2020, at 2:14 PM, Demi M. Obenour wrote:
>
> On 2020-05-26 09:34, Kanto Andria wrote:
>> Hello,
>> man ndp is probably another solution
>>
>>On Tuesday, May 26, 2020, 9:17:25 a.m. EDT, Tommy Nevtelen
>> wrote:
>>
>>> On
20 matches
Mail list logo
