Ok guys,
Lets kill this one.
I did asked that question simply out of curiosity more then a week ago
and I got the answer. End of story.
Like I said then, I was just curious. Sure I would love to see OpenBSD
running on the 32 simultaneous processing threads of the T1 processor,
but Theo is
Hi,
for several years I've used Linux on some machines while now I'm
trying to switch to OpenBSD. With the Linux Firewall called iptables
you can easely block all connections which try to establish a new
connection. For example your default policy is block and then you
could use the
On Fri, 24 Feb 2006, Stefan wrote:
Hi,
for several years I've used Linux on some machines while now I'm
trying to switch to OpenBSD. With the Linux Firewall called iptables
you can easely block all connections which try to establish a new
connection. For example your default policy
On Feb 24, 2006, at 6:29 AM, Otto Moerbeek wrote:
On Fri, 24 Feb 2006, Stefan wrote:
iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
Does someone know if this is also possible with the OpenBSD PF?
Read http://www.openbsd.org/faq/pf/filter.html#state, esp. the
flags
Stefan [EMAIL PROTECTED] writes:
block in inet6 all
pass in inet6 proto { tcp, udp } from any to any flags /S
'keep state' would certainly help.
I would suggest something along the lines of
block all
pass inet proto { tcp, udp } from $me to any port $portsiwant keep state
with useful
On Fri, Feb 24, 2006 at 12:15:44PM +0100, Stefan wrote:
Hi,
for several years I've used Linux on some machines while now I'm
trying to switch to OpenBSD. With the Linux Firewall called iptables
you can easely block all connections which try to establish a new
connection. For example
Michael Schmidt wrote:
Hello together,
is it impossible to run USB driven tapedrives under OpenBSD?
The hardware list shows them to be officially not supported.
Thanks to all who replied.
I have kape my fingers off USB-tapes and could get a SCSI-tape.
SCSI forever ;)
--
Michael Schmidt
Thank you for all the help. I've created a new ruleset which I hope
is ok.
# macros
int_if = em0
# tables
# options
set block-policy return
# scrub
scrub all
# filter rules
block log inet6 all
pass quick on lo0 inet6 all
pass in quick on gif0 inet6 proto icmp6 icmp6-type echoreq keep
Hello,
I would like to run an OpenBSD machine where I want that the boot prompt
disappears, reason is that I do not want others having access to the
boot prompt.
In case you put a boot into boot.conf or set timeout to zero then you
do not have the opportunity to boot in single user when it
On Fri, Feb 24, 2006 at 02:53:06PM +0100, Michael Schmidt wrote:
Hello,
I would like to run an OpenBSD machine where I want that the boot prompt
disappears, reason is that I do not want others having access to the
boot prompt.
In case you put a boot into boot.conf or set timeout to zero
On 2/24/06, Michael Schmidt [EMAIL PROTECTED] wrote:
Hello,
I would like to run an OpenBSD machine where I want that the boot prompt
disappears, reason is that I do not want others having access to the
boot prompt.
In case you put a boot into boot.conf or set timeout to zero then you
do not
Boot off of the cd38.iso, mount your / partition and remove
your /etc/boot.conf is the first way that comes to mind.
You could also work some magic with the boot prompt that you get from booting
off the CD. Something like boot -s hd0a:/bsd should do it and I'm sure I
could find a half
I am trying to use carp in a high availability cluster with an i386 and
an amd64 machine and OpenBSD 3.8. Most of the time, everything is
working fine, but occasionally on the i386 machine I get:
Feb 22 21:24:12 host386 /bsd: carp0: incorrect hash
I have switched out network cards, moved the
Hello all,
I have the following problem when running freshclam:
# freshclam
ClamAV update process started at Fri Feb 24 17:58:29 2006
ERROR: Can't get information about db.ro.clamav.net: Host not found
Connection with db.ro.clamav.net (IP: ???) failed.
Trying again in 5 secs...
Hi,
I have a PC running 3.8 which is currently idle (ie, it is powered on,
but nobody uses it except me for minor maintenance). The box showed the
following behaviour over the last few weeks: w/o much processes running
and almost no activity, the amount of free memory shown in 'top'
decreases
From: [EMAIL PROTECTED]
[... doesn't have idle memory]
Is it a real problem, or is this only misleading top output (despite
the machine feeling quite sluggish)?
Or does OpenBSD put idle memory to productive use elsewhere, making the
perception that it is just leaking away?
DS
I understand your problem. In fact a closer analysis will
show that there is no problem. Probably the memory you are reporting
as filled is used for caching/memory. At work I have an OpenBSD 3.8
system (with 1GB RAM, P4 3GHz) and I haven't noticed such a thing.
Nevertheless, I don't
Hi there,
seems I get a bug with openbgpd in 3.9-beta snapshot of 12/02/2006.
I get some configuration like this
group transit {
remote-as x
local-address xx.xx.xx.3
neighbor xx.xx.xx.1 {
descr transit-1
announce self
On Friday, February 24, Michael Schmidt wrote:
In case you put a boot into boot.conf or set timeout to zero then you
do not have the opportunity to boot in single user when it may be
necessary. Are there ways to circumvent the latter?
With physical access to the machine, yes, there are
Bryan Irvine [EMAIL PROTECTED] wrote:
If the laptop only needs www access no appletalk is needed. Appletalk
is purely a file serving mechanism, like samba or nfs. If you need
appletalk it's pretty easy to set up on OpenBSD.
Well... Appletalk itself is a lower-level protocol than samba or
On Fri, Feb 24, 2006 at 06:37:00PM +0100, Xavier Beaudouin wrote:
Hi there,
seems I get a bug with openbgpd in 3.9-beta snapshot of 12/02/2006.
I get some configuration like this
group transit {
remote-as x
local-address xx.xx.xx.3
neighbor xx.xx.xx.1 {
Hello,
I have isakmpd setup talking to about 15 IKE peers and doing about 100
Phase 2 SA's. However, frequently I will attempt to initiate traffic over
one of the tunnels and will not get any response.
If I issue a command to the FIFO like so : echo S /tmp/isakmpd.fifo
and then view the
Hi,
I've a firewall/proxy with 3.7 running a named and transparent
squid. I want to use cachemgr.cgi, so I've setup apache to listen
on port 8080 and copied /usr/local/libexec/cachemgr.cgi to
/var/www/cgi-bin
Now, the Cache Manager Interface comes up on
http://firewall:8080/cgi-bin/cachemgr.cgi,
On 21 Feb 2006, at 13:43, FTP wrote:
Hi there,
I'm interested to buy an ADSL modem PCI card for OpenBSD and
Sangoma informed me that their products are not for xBSD any more!
Any alternatives around?
I've been using an Thomson (previously Alcatel) Speedtouch USB ADSL
modem.
ugen0 at
On Fri, 2006-02-24 at 21:57:24 +0100, Martin Schrvder proclaimed...
Now, the Cache Manager Interface comes up on
http://firewall:8080/cgi-bin/cachemgr.cgi, but whatever I enter
(or if I simply press Continue), I always get an error page:
Cache Manager Error
On Fri, Feb 24, 2006 at 09:57:24PM +0100, Martin Schr?der wrote:
Hi,
I've a firewall/proxy with 3.7 running a named and transparent
squid. I want to use cachemgr.cgi, so I've setup apache to listen
on port 8080 and copied /usr/local/libexec/cachemgr.cgi to
/var/www/cgi-bin
Now, the Cache
Hi,
can anyone tell me wtf I'm missing in the commands below?
# mkdir foo
# cd foo
# mkdir bin dev
# cp -p /bin/cat bin
# cd dev
# /dev/MAKEDEV std
# cd ..
# chroot . /bin/cat /dev/stdin
cat: /dev/stdin: Device not configured
The reason I ask is that I need to run tar -czf within a chroot
Matthias Kilian 24-Feb-06 21:38
Hi,
can anyone tell me wtf I'm missing in the commands below?
# mkdir foo
# cd foo
# mkdir bin dev
# cp -p /bin/cat bin
# cd dev
# /dev/MAKEDEV std
# cd ..
# chroot . /bin/cat /dev/stdin
cat: /dev/stdin: Device not configured
The reason I ask is
On 2/24/06, Gabriel George POPA [EMAIL PROTECTED] wrote:
I understand your problem. In fact a closer analysis will
show that there is no problem. Probably the memory you are reporting
as filled is used for caching/memory.
Caching RAM is space reserved for data being used by the
On 2/24/06, Matthias Kilian [EMAIL PROTECTED] wrote:
Hi,
can anyone tell me wtf I'm missing in the commands below?
# mkdir foo
# cd foo
# mkdir bin dev
# cp -p /bin/cat bin
# cd dev
# /dev/MAKEDEV std
This should say stdin, no?
# cd ..
# chroot . /bin/cat /dev/stdin
cat: /dev/stdin:
On Fri, Feb 24, 2006 at 10:38:13PM +0100, Matthias Kilian wrote:
Hi,
can anyone tell me wtf I'm missing in the commands below?
# mkdir foo
# cd foo
# mkdir bin dev
# cp -p /bin/cat bin
# cd dev
# /dev/MAKEDEV std
# cd ..
# chroot . /bin/cat /dev/stdin
cat: /dev/stdin: Device not
can anyone tell me wtf I'm missing in the commands below?
# mkdir foo
# cd foo
# mkdir bin dev
# cp -p /bin/cat bin
# cd dev
# /dev/MAKEDEV std
# cd ..
# chroot . /bin/cat /dev/stdin
cat: /dev/stdin: Device not configured
The reason I ask is that I need to run tar -czf within a
while doing some reading on secure software development
(//www.ranum.com/security/computer_security/archives/security-for-developers.pdf)
I came across the advice always link your priviliged binaries
statically.
However a quick check on my system revealed me almost all suid/sgid
programs
can anyone tell me wtf I'm missing in the commands below?
# mkdir foo
# cd foo
# mkdir bin dev
# cp -p /bin/cat bin
# cd dev
# /dev/MAKEDEV std
# cd ..
# chroot . /bin/cat /dev/stdin
cat: /dev/stdin: Device not configured
The reason I ask is that I need to run tar -czf
On Fri, Feb 24, 2006 at 04:49:07PM -0500, Nick Holland wrote:
cat: /dev/stdin: Device not configured
[...]
~ $ mount
/dev/wd0a on / type ffs (local, softdep)
/dev/wd0h on /home type ffs (local, nodev, nosuid, softdep)
/dev/wd0e on /tmp type ffs (local, nodev, nosuid, softdep)
/dev/wd0d on
You have been successfully removed and will not receive any more messages.
Hey folks,
i am in need to make windows and openbsd machines to live together and happy.
I have kerberos, nis, storage server in openbsd and would like to them
to server windows clients and servers. I have users on my nfs openbsd
server and my users are on a nis server too.
One very important
-Original Message-
From: [EMAIL PROTECTED] on behalf of Gustavo Rios
Sent: Fri 2/24/2006 9:39 PM
To: misc@openbsd.org
Subject: integrating windows client and server with openbsd servers
Hey folks,
i am in need to make windows and openbsd machines to live together and happy.
I have
I want to use pf.conf in what may be an unusual place.
Not the usual sheild between private net and internet.
It would be more as a logging service but will need some config to
allow two private net machines to access it.
A network picture:
INTERNET
|
Harry Putnam wrote:
I want to use pf.conf in what may be an unusual place.
Not the usual sheild between private net and internet.
It would be more as a logging service but will need some config to
allow two private net machines to access it.
A network picture:
Melameth, Daniel D. [EMAIL PROTECTED] writes:
There is a facility on the NETGEAR to send all traffic to an inside
machine for whatever reason. Its called a DMZ Server although I don't
think that is the normal usage of DMZ, but not experienced enough to
know for sure.
This might not work
Dan and Harry,
Agreed. A consumer-class Netgear device will not be the best choice, as it's
got an underpowered CPU and has more than enough issues with its
configuration. While many SOHO routers can output to syslog, unless you spend
the money for a higher-end product like a Juniper Netscreen,
Harry Putnam wrote:
Melameth, Daniel D. [EMAIL PROTECTED] writes:
There is a facility on the NETGEAR to send all traffic to an
inside machine for whatever reason. Its called a DMZ Server
although I don't think that is the normal usage of DMZ, but not
experienced enough to know for
Somebody should gave him the boot.
Respectfully,
Tony Sterrett
[EMAIL PROTECTED]
Consultant in Open Source Software, featuring OpenBSD and Linux.
www.sterrett.net
(858) 433-1467 San Diego
(408) 705-2135 San Jose
On Feb 24, 2006, at 5:06 PM, julio perez wrote:
hey, umm..i need help. Umm..can
--- Gabriel George POPA [EMAIL PROTECTED] wrote:
Hello all,
I have the following problem when running freshclam:
# freshclam
ClamAV update process started at Fri Feb 24 17:58:29 2006
ERROR: Can't get information about db.ro.clamav.net: Host not found
Connection with
Melameth, Daniel D. [EMAIL PROTECTED] writes:
Thanks for the nifty summary. I want to pester you just a little more
then I'll get to work on this and see if I get really stuck
somewhere.
# Address translation for machines on your LAN
nat on $ext_if from $int_if:network to any - ($ext_if)
Hi everyone. I've been trying to bring up an old Sun Enterprise Ultra 150,
with the following results. I keep thinking that there's something obvious
staring me in the face, but I don't see it. Can anyone help?
Thanks in advance!
Dave Klingler
Boot device: disk1:3 File and args:
OpenBSD IEEE
--On February 24, 2006 11:04:12 PM -0700
[EMAIL PROTECTED] wrote:
Hi everyone. I've been trying to bring up an old Sun Enterprise
Ultra 150, with the following results. I keep thinking that
there's something obvious staring me in the face, but I don't see
it. Can anyone help?
Thanks in
48 matches
Mail list logo
