OpenBSD 4.5 and RelayD
Before implementing relayd for load balancing needs I wanted to get some answers (Yes I have read relayd and relayd.conf manual and I am able to run them successfully in a test environment). So here are some of the questions: 1. when I choose mode as loadbalance, what algorithm is is using? Is there a place where I can see that relayd is properly load balancing? 2. I see that "sticky-address" is only available in redirect, can I achieve the same in a relay? 3. Finally where is relayd logging everything? Thanks Dabheeruz
Dominios ? venda
DESENVOLVIMENTO COMERCIAL ACTIVO As "Vendas Valores- Consultores Comerciais" i uma empresa que presta servigos de consultoria comercial, de forma a maximizar o potjncial comercial da sua empresa. A Consultoria Comercial consiste numa analise sistematica do departamento comercial da empresa de forma a efectuar um diagnsstico detalhado do mesmo, deteCtando os pontos fracos e forte, com o objectivo de minimizar ou corrigir os pontos fracos e maximizar ou aperfeigoar os fortes. MELHOR A PERFOMANCE COMERCIAL DA SUA EMPRESA www.vendasvalor.com Pega-nos um orgamento gratuito Contactos: Vendas Valor- Consultores Comerciais Estrada Exterior da Circunvalagco n: 6670-3 G 4425-650- Pedrougos-Maia Tel: 220138738 Fax: 220137290 ge...@vendasvalor.com www.vendasvalor.com Copyright Vendas Valor- Consultores Comerciais Se nco deixa receber esta newsletter click Remove'>aqui e envie o e-mail [demime 1.01d removed an attachment of type image/jpeg which had a name of 1.jpg]
Re: CARP problem : slave rioting
Pierre, If I'm not mistaken the vhid on all your carp interfaces are the same value. I would suggest you use a unique value for each group. >From the man : The Virtual Host ID. This is a unique number that is used to identify the redundancy group to other nodes on the network. Acceptable values are from 1 to 255. I think this is the way to go but I'm not sure. UM "Nonviolence means avoiding not only external physical violence but also internal violence of spirit. You not only refuse to shoot a man, but you refuse to hate him". Rev. Martin Luther King Jr. On Fri, Jun 26, 2009 at 6:31 AM, BARDOU Pierre wrote: > Hello, > > CARP is configured using a script. Here it is (truncated version) : > > ifconfig carp5 create > ifconfig carp5 vhid 10 advskew $1 pass $PASS 10.31.0.254/16 description "LAN" > > ifconfig carp2 create > ifconfig carp2 vhid 10 advskew $1 pass $PASS 193.57.199.254/24 description "DMZ 1" > > ifconfig carp3 create > ifconfig carp3 vhid 10 advskew $1 pass $PASS 10.193.57.254/24 description "DMZ 2" > > ifconfig carp12 create > ifconfig carp12 vhid 10 advskew $1 pass $PASS 8.8.0.254/24 description "DMZ 3" > > > ifconfig carp13 create > ifconfig carp13 vhid 10 advskew $1 pass $PASS 10.193.70.254/24 description "DMZ 5" > > ifconfig carp4 create > ifconfig carp4 vhid 10 advskew $1 pass $PASS 10.60.0.254/24 description "DMZ Internet" > ifconfig carp4 alias 217.109.108.1/24 > > ifconfig carp14 create > ifconfig carp14 vhid 10 advskew $1 pass $PASS 217.109.xxx.xxx/28 description "Internet" > > > -- > Cordialement, > Pierre BARDOU > > > -Message d'origine- > De : uday [mailto:umoorjani@gmail.com] > Envoyi : vendredi 26 juin 2009 12:21 > @ : BARDOU Pierre > Cc : misc@openbsd.org > Objet : Re: CARP problem : slave rioting > > Can you post configuration files for the carp interfaces ? > > "Nonviolence means avoiding not only external physical violence but > also internal violence of spirit. You not only refuse to shoot a man, > but you refuse to hate him". Rev. Martin Luther King Jr. > > > > On Mon, Jun 22, 2009 at 11:01 AM, BARDOU Pierre wrote: >> Hello, >> >> I have a setup with 2 openBSD boxes used as firewall, redundancy is made using >> CARP. >> Each has 4 NIC : 1 for internet, 1 for pfsync, and the two last are used as a >> trunk, collecting all other VLANs. >> Master's advskew is 10, slave's is 50. >> All worked like a charm since nearly 2 years, but since 3 weeks I have odd >> problems : >> * on the net interface, the backup becomes master, but the master remains >> master -> Nearly half of the packets are lost >> I did a tcpdump on the slave's interface, carp packets from the master arrive. >> But it remains master ! >> Jun 22 16:42:50.572205 00:00:5e:00:01:0a 01:00:5e:00:00:12 0800 70: >> CARPv2-advertise 36: vhid=10 advbase=1 advskew=10 demote=0 (DF) [tos 0x10] >> Jun 22 16:42:50.748122 00:00:5e:00:01:0a 01:00:5e:00:00:12 0800 70: >> CARPv2-advertise 36: vhid=10 advbase=1 advskew=50 demote=0 (DF) [tos 0x10] >> >> * on my DMZ interface (vlan 4), the carp is in INIT state. By the way, as it >> is part of a trunk, physical connections are good : they work for all other >> VLANs. When I shut down the corresponding carp interface on the slave >> (ifconfig carp4 down), master becomes master again. >> >> Could you give me any clue to keep my master in master state ? >> >> Thank you >> >> -- >> Cordialement, >> >> Pierre BARDOU >> CSIM - Bureau 012 >> >> Midi Picardie Informatique Hospitalihre >> 12 rue Michel Labrousse >> BP93668 >> F-31036 Toulouse CEDEX 1 >> >> Til : 05 67 31 90 84 >> Fax : 05 34 61 51 00 >> Mail : bardo...@mipih.fr
Re: Plenty of Spam these days on the List
Siju George wrote: I am wondering why this has increased in the near future :-( --Siju Obviously you and the list maintainers haven't kept up to date. Recently Spam-Evil-3.56p0 -> Spam-Evil-3.7 They need to upgrade Spam-GoAway-4.3p2 -> Spam-GoAway-5.0 A quick little fix and all that nasty spam will go away!! -- OR -- perhaps its just that those little bastards have gotten a tad cleverer? I certainly noticed more spam getting past spamd starting a few months ago into my server. spamd is wonderful, but I have to maintain a manual blacklist now. Chris Bennett -- A human being should be able to change a diaper, plan an invasion, butcher a hog, conn a ship, design a building, write a sonnet, balance accounts, build a wall, set a bone, comfort the dying, take orders, give orders, cooperate, act alone, solve equations, analyze a new problem, pitch manure, program a computer, cook a tasty meal, fight efficiently, die gallantly. Specialization is for insects. -- Robert Heinlein
Re: "X -configure" command reboots machine
w...@xoono.net [w...@xoono.net] wrote: > pciide0 at pci0 dev 2 function 1 "Acer Labs M5219 UDMA IDE" rev 0x20: DMA > (unsupported), channel 0 configured to compatibility, channel 1 > configured to compatibility > pciide0: channel 0 ignored (other hardware responding at addresses) > pciide0: channel 1 ignored (other hardware responding at addresses) > cbb0 at pci0 dev 4 function 0 "TI PCI1130 CardBus" rev 0x04: couldn't map > interrupt > cbb1 at pci0 dev 4 function 1 "TI PCI1130 CardBus" rev 0x04: couldn't map > interrupt Does 4.2 also show these errors? Can you boot 4.3 and 4.4 bsd.rd and see there too?
pf-relayd-carp - multiple carp aliases to be used in relayd
Hi,
I've setup pf relayd and carp to work together as a load balancer. I
have one carp interface on the public internet on both servers :
inet 192.168.172.77 255.255.255.240 192.168.172.79 vhid 1 pass foo
inet alias 192.168.172.74 255.255.255.255
I wish to use ip aliases on the carp interface to send load balanced
traffic through relayd, traffic such as http/https. I goal here is the
to be able to bind service ports to external ip aliases on the carp
interface and proxy the traffic to my internal network.
I have relayd configured to recieve https traffic from aliased ip of
the carp interface :
relay https-proxy {
listen on 192.168.172.74 port 443 ssl
protocol https
forward to port 80 mode loadbalance check http "/" code 200
}
Now this configuration works like a charm..but not for long. After a
while I get timed out to the server. I tried setting up a second carp
interface with a different vhid to be sure that there was no
conflicts. Even after that I get the same symptom. When I try to
tcpdump the incoming traffic I see nothing coming in. All of this
happens after a while not right away, I have to do sh /etc/netstart on
both servers for it to go back to normal and then a while later it
starts to have the same reaction. Has anyone tried this sort of
configuration ? If Yes, do you have production examples or best
practices you can share ?
Thank you very much for your kind support.
"Nonviolence means avoiding not only external physical violence but
also internal violence of spirit. You not only refuse to shoot a man,
but you refuse to hate him". Rev. Martin Luther King Jr.
Departamentos en Mar del Plata en 120 Cuotas!!
NS EDIFICIOS se complace en acercarle una excelente propuesta: su plan en 120 CUOTAS!!!, a travis de un sistema znico de financiacisn propia, con mmnimo anticipo y sin requisitos formales de accesibilidad, mediante el cual UD. Podra acceder a su departamento de 1 2 y 3 ambientes, oficina, ambiente apto para profesional o simplemente como una magnifica inversisn. Edificados en las mejores ubicaciones de nuestra ciudad. Desde hoy UD. tiene una opcisn diferente que seguramente va a estar al alcance de sus posibilidades a travis de un PLAN POSIBLE, AGIL Y VERDADERAMENTE SENCILLO. No deje pasar esta gran oportunidad. Acirquese a nuestra oficina o comunmquese vma mail o telefsnicamente y uno de nuestros representantes le informara acerca de todo lo que UD. necesita saber. Esperamos su consulta NS EDIFICIOS BELGRANO 3367 MAR DEL PLATA TE.: (0223) 474-9158 Mail: nsmardelpl...@fibertel.com.ar
relayd question
Hi List ! Another Quick question... Is there a way to define a table name in relayd.conf and use this same table name in pf.conf ?? ( instead of dealing with __automatic_.. in pf.conf ) Marcus
isakmpd question
Hey List !
quick question... Is there a way to clear one specific VPN in the
ipsecctl reference table or a really need to clear the entire table ? (
ipsecctl -F )
Example... I got a bunch of VPN ( 50 + ) , need to flush the state of
this particular one:
BSD 4.3 // config in /etc/ipsec.conf
# IPSec encapsulation of GRE tunnel OSPF between office
ike esp transport from { 10.200.0.10 } to { 192.168.1.200 } \
local ip.my.primary.office peer ip.my.remote.office \
main auth hmac-sha1 enc aes-256 group modp1024 \
quick auth hmac-sha1 enc aes-256 group modp1024
Regards
Marcus
Re: random crashes on a firewall with OpenBSD 4.5-stable
Can't read that? Custom compiled kernel and cac error speaks by
themselves; dirty solution, try other disk controller. Best solution,
discard you don't have bad hardware and, if everything is ok, make
contact with developers and help searching for a code patch to improve
the RAID adapter driver.
Regards!
Dani
ComC(te escribiC3:
Hi,
we are using the last OpenBSD 4.5-stable release on an old Compaq
Proliant ML350 as a firewall with spamd. But we encounter randomly some
system crashes (once a week or two weeks). The system always displays
the same message:
uvm_fault (0xd080d9e00x0,0,1) -> e
kernel: page fault trap, code=0
Stopped at cac_pci_l0_intr_pending+0xb
push 0x34 (%eax)
What do you think it could be ? I thought about maybe a hardware problem
but where exactly...
I join my dmesg below
Thanks for your advice !
OpenBSD 4.5-stable (GENERIC) #9: Sun May 17 22:59:17 CEST 2009
r...@arwen.saintlo.fr:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) III CPU family 1266MHz ("GenuineIntel"
686-class) 1.27 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 267988992 (255MB)
avail mem = 250839040 (239MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf,
SMBIOS rev. 2.3 @ 0xec000 (31 entries)
bios0: vendor Compaq version "D11" date 01/29/2002
bios0: Compaq ProLiant ML350 G2
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC SPCR
acpi0: wakeup devices PBTN(S5)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
cpu0 at mainbus0: apid 3 (boot processor)
cpu0: apic clock running at 132MHz
ioapic0 at mainbus0: apid 8 pa 0xfec0, version 11, 16 pins
ioapic0: misconfigured as apic 0, remapped to apid 8
ioapic1 at mainbus0: apid 2 pa 0xfec01000, version 11, 16 pins
ioapic1: misconfigured as apic 0, remapped to apid 2
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (PCI1)
acpicpu0 at acpi0
acpitz0 at acpi0: critical temperature 31 degC
acpibtn0 at acpi0: PBTN
bios0: ROM list: 0xc/0x8000 0xc8000/0x1800 0xc9800/0x1800
0xcb000/0x1800 0xcc800/0x4000! 0xd0800/0x1800 0xee000/0x2000!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20LE Host" rev 0x06
pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20LE Host" rev 0x06
pci1 at pchb1 bus 2
em0 at pci1 dev 1 function 0 "Intel PRO/1000T (82544GC)" rev 0x02: apic
2 int 0 (irq 5), address 00:02:b3:b9:0d:a4
em1 at pci1 dev 2 function 0 "Intel PRO/1000T (82544GC)" rev 0x02: apic
2 int 2 (irq 15), address 00:02:b3:b9:0d:7d
re0 at pci1 dev 3 function 0 "D-Link Systems DGE-528T" rev 0x10:
RTL8169/8110SB (0x1000), apic 2 int 4 (irq 15), address 00:1c:f0:6f:38:7e
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 3
cac0 at pci1 dev 4 function 0 "DEC Compaq SMART RAID 42xx" rev 0x01:
apic 2 int 6 (irq 11), Smart Array 431
scsibus0 at cac0: 1 targets
sd0 at scsibus0 targ 0 lun 0: SCSI2 0/direct
fixed
sd0: 34727MB, 512 bytes/sec, 71122560 sec total
re1 at pci1 dev 5 function 0 "D-Link Systems DGE-528T" rev 0x10:
RTL8169/8110SB (0x1000), apic 2 int 8 (irq 15), address 00:1c:f0:62:eb:12
rgephy1 at re1 phy 7: RTL8169S/8110S PHY, rev. 3
fxp0 at pci0 dev 1 function 0 "Intel 8255x" rev 0x08, i82559: apic 2 int
10 (irq 5), address 00:02:a5:44:33:f7
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
ahc0 at pci0 dev 2 function 0 "Adaptec AHA-3960D U160" rev 0x01: apic 2
int 11 (irq 11)
scsibus1 at ahc0: 16 targets, initiator 7
ahc1 at pci0 dev 2 function 1 "Adaptec AHA-3960D U160" rev 0x01: apic 2
int 11 (irq 11)
scsibus2 at ahc1: 16 targets, initiator 7
st0 at scsibus2 targ 6 lun 0: SCSI2
1/sequential removable
fxp1 at pci0 dev 4 function 0 "Intel 8255x" rev 0x08, i82559: apic 2 int
13 (irq 10), address 00:08:02:45:29:64
inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 4
vga1 at pci0 dev 5 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Compaq Netelligent ASMC" rev 0x00 at pci0 dev 6 function 0 not configured
piixpm0 at pci0 dev 15 function 0 "ServerWorks CSB5" rev 0x92: polling
iic0 at piixpm0
iic0: addr 0x28 00=a0 01=10 02=03 03=01 04=7f 05=04 06=03 07=00 08=00
09=00 0b=00 0c=03 0d=41 0e=02 0f=00 10=00 11=05 18=3a 19=10 20=ff 21=ff
28=00 29=00 2a=04 2b=00 2c=00 2d=00 2e=00 30=00 31=00 32=00 38=00 39=00
3a=00 3b=00 3c=00 3d=00 3e=00 40=08 41=08 42=80 48=03 49=03 4a=03 50=00
51=80 58=00 59=00 60=f0 61=f0 68=af 69=af 70=ff 71=00 78=ff 79=ff 80=2b
81=37 82=ff 88=f0 89=f0 8a=f0 90=3c 91=46 92=ff 98=37 99=41 9a=ff a0=22
a1=2d a2=80 a8=ff a9=ff b0=00 b1=00 b8=06 b9=00 words 00=a0a0 01=1010
02=0303 03=0101 04=7f7f 05=0404 06=0303 07=
spdmem0 at iic0 addr 0x50: 256MB SDRAM registered ECC PC133CL2
pciide0 at pci0 dev 15 function 1 "ServerWorks CSB5 IDE" rev 0x92: DMA
atapiscsi0 at pciide0 channel 0 drive 0
scsibus3 at atapiscsi0: 2 targets
cd0 a
Re: random crashes on a firewall with OpenBSD 4.5-stable
On 2009-06-26, Michal wrote: > Well, you can check the Volt readings in the bios, most will give you a > reading, but I am sure there is some BSD software out there "sysctl hw.sensors" works for some systems. also see sensorsd(8).
Re: Plenty of Spam these days on the List
On Fri, Jun 26, 2009 at 09:57:51PM +0530, Siju George wrote: > I am wondering why this has increased in the near future :-( You seem to possess powers tha I (and I suspect many others) do not. Do you have a crystal ball, were you struck by a meteorite, were you granted three wishes and used one to look into the futre? ;) > > --Siju
Re: Plenty of Spam these days on the List
On Fri, Jun 26, 2009 at 09:57:51PM +0530, Siju George wrote: > I am wondering why this has increased in the near future :-( > > --Siju > Maybe you should stop sending more of it
Plenty of Spam these days on the List
I am wondering why this has increased in the near future :-( --Siju
Re: random crashes on a firewall with OpenBSD 4.5-stable
Overheating?
On 26 jun 2009, at 17.50, Michal wrote:
Well, you can check the Volt readings in the bios, most will give
you a
reading, but I am sure there is some BSD software out there, maybe
someone
in the list will know. On windows you can use Speedfan. Even if it's
not
this, it's worth knowing how to check this as a simple check on
servers
-Original Message-
From: Comhte [mailto:com...@daknet.org]
Sent: 26 June 2009 16:42
To: Michal
Subject: Re: random crashes on a firewall with OpenBSD 4.5-stable
Oh sorry :p
How could i test the power supply unit ?
Michal a icrit :
Other servers?? I don't mean PDU, I mean PSU...the power supply in
the
server. If your shearing a power supply across 2 servers I would be
shocked
:)
-Original Message-
From: Comete [mailto:com...@daknet.org]
Sent: 26 June 2009 13:48
To: Michal
Subject: Re: random crashes on a firewall with OpenBSD 4.5-stable
No problem with the PSU and voltage limits. The PSU isn't used at its
full capacity and the other servers plugged on it work well.
Could it be a bad network interface ?
Michal a icrit :
Just stabbing the dark here, test your Voltage Rails on your PSU.
Check
they
are within limits. I find unexplained crash's can be traced back
to PSU's
quite often
-Original Message-
From: owner-m...@openbsd.org [mailto:owner-m...@openbsd.org] On
Behalf Of
Comhte
Sent: 26 June 2009 12:22
To: Misc OpenBSD
Cc: Daniel Gracia Garallar
Subject: Re: random crashes on a firewall with OpenBSD 4.5-stable
Well i have tested the RAM with memtest, no error.
maybe another idea ?
Thanks
Daniel Gracia Garallar a C)crit :
Oh and maybe bad RAM; I've hit some nasty errors with these faulty
DIMMs... :/
ComC(te escribiC3:
Hi,
we are using the last OpenBSD 4.5-stable release on an old Compaq
Proliant ML350 as a firewall with spamd. But we encounter randomly
some system crashes (once a week or two weeks). The system always
displays the same message:
uvm_fault (0xd080d9e00x0,0,1) -> e
kernel: page fault trap, code=0
Stopped at cac_pci_l0_intr_pending+0xb
push 0x34 (%eax)
What do you think it could be ? I thought about maybe a hardware
problem but where exactly...
I join my dmesg below
Thanks for your advice !
OpenBSD 4.5-stable (GENERIC) #9: Sun May 17 22:59:17 CEST 2009
r...@arwen.saintlo.fr:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) III CPU family 1266MHz ("GenuineIntel"
686-class) 1.27 GHz
cpu0:
FPU
,V86
,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,
FXSR,SSE
real mem = 267988992 (255MB)
avail mem = 250839040 (239MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @
0xf, SMBIOS rev. 2.3 @ 0xec000 (31 entries)
bios0: vendor Compaq version "D11" date 01/29/2002
bios0: Compaq ProLiant ML350 G2
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC SPCR
acpi0: wakeup devices PBTN(S5)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
cpu0 at mainbus0: apid 3 (boot processor)
cpu0: apic clock running at 132MHz
ioapic0 at mainbus0: apid 8 pa 0xfec0, version 11, 16 pins
ioapic0: misconfigured as apic 0, remapped to apid 8
ioapic1 at mainbus0: apid 2 pa 0xfec01000, version 11, 16 pins
ioapic1: misconfigured as apic 0, remapped to apid 2
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (PCI1)
acpicpu0 at acpi0
acpitz0 at acpi0: critical temperature 31 degC
acpibtn0 at acpi0: PBTN
bios0: ROM list: 0xc/0x8000 0xc8000/0x1800 0xc9800/0x1800
0xcb000/0x1800 0xcc800/0x4000! 0xd0800/0x1800 0xee000/0x2000!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20LE Host" rev 0x06
pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20LE Host" rev 0x06
pci1 at pchb1 bus 2
em0 at pci1 dev 1 function 0 "Intel PRO/1000T (82544GC)" rev 0x02:
apic 2 int 0 (irq 5), address 00:02:b3:b9:0d:a4
em1 at pci1 dev 2 function 0 "Intel PRO/1000T (82544GC)" rev 0x02:
apic 2 int 2 (irq 15), address 00:02:b3:b9:0d:7d
re0 at pci1 dev 3 function 0 "D-Link Systems DGE-528T" rev 0x10:
RTL8169/8110SB (0x1000), apic 2 int 4 (irq 15), address
00:1c:f0:6f:38:7e
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 3
cac0 at pci1 dev 4 function 0 "DEC Compaq SMART RAID 42xx" rev
0x01:
apic 2 int 6 (irq 11), Smart Array 431
scsibus0 at cac0: 1 targets
sd0 at scsibus0 targ 0 lun 0: SCSI2 0/
direct
fixed
sd0: 34727MB, 512 bytes/sec, 71122560 sec total
re1 at pci1 dev 5 function 0 "D-Link Systems DGE-528T" rev 0x10:
RTL8169/8110SB (0x1000), apic 2 int 8 (irq 15), address
00:1c:f0:62:eb:12
rgephy1 at re1 phy 7: RTL8169S/8110S PHY, rev. 3
fxp0 at pci0 dev 1 function 0 "Intel 8255x" rev 0x08, i82559:
apic 2
int 10 (irq 5), address 00:02:a5:44:33:f7
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
ahc0 at pci0 dev 2 function 0 "Adaptec AHA-3960D U160" rev 0x01:
apic
2 int 11 (irq 11)
scsibus1 at ahc0: 16 targets, initiator 7
ahc1 at pci0 dev 2 function 1 "Adaptec AHA-3960D
Re: random crashes on a firewall with OpenBSD 4.5-stable
But even measuring the ripple with a scope won't guarantee it's OK. Swapping out all of the hardware is sometimes the only way to find out. Same goes for memtest86+: it can prove it's broken, but if it doesn't find problems it doesn't guarantee there are none. -- Jussi Peltola
Re: random crashes on a firewall with OpenBSD 4.5-stable
Well, you can check the Volt readings in the bios, most will give you a
reading, but I am sure there is some BSD software out there, maybe someone
in the list will know. On windows you can use Speedfan. Even if it's not
this, it's worth knowing how to check this as a simple check on servers
-Original Message-
From: Comhte [mailto:com...@daknet.org]
Sent: 26 June 2009 16:42
To: Michal
Subject: Re: random crashes on a firewall with OpenBSD 4.5-stable
Oh sorry :p
How could i test the power supply unit ?
Michal a icrit :
> Other servers?? I don't mean PDU, I mean PSU...the power supply in the
> server. If your shearing a power supply across 2 servers I would be
shocked
> :)
>
> -Original Message-
> From: Comete [mailto:com...@daknet.org]
> Sent: 26 June 2009 13:48
> To: Michal
> Subject: Re: random crashes on a firewall with OpenBSD 4.5-stable
>
> No problem with the PSU and voltage limits. The PSU isn't used at its
> full capacity and the other servers plugged on it work well.
>
> Could it be a bad network interface ?
>
> Michal a icrit :
>> Just stabbing the dark here, test your Voltage Rails on your PSU. Check
> they
>> are within limits. I find unexplained crash's can be traced back to PSU's
>> quite often
>>
>> -Original Message-
>> From: owner-m...@openbsd.org [mailto:owner-m...@openbsd.org] On Behalf Of
>> Comhte
>> Sent: 26 June 2009 12:22
>> To: Misc OpenBSD
>> Cc: Daniel Gracia Garallar
>> Subject: Re: random crashes on a firewall with OpenBSD 4.5-stable
>>
>> Well i have tested the RAM with memtest, no error.
>>
>> maybe another idea ?
>>
>> Thanks
>>
>> Daniel Gracia Garallar a C)crit :
>>> Oh and maybe bad RAM; I've hit some nasty errors with these faulty
>>> DIMMs... :/
>>>
>>> ComC(te escribiC3:
Hi,
we are using the last OpenBSD 4.5-stable release on an old Compaq
Proliant ML350 as a firewall with spamd. But we encounter randomly
some system crashes (once a week or two weeks). The system always
displays the same message:
uvm_fault (0xd080d9e00x0,0,1) -> e
kernel: page fault trap, code=0
Stopped at cac_pci_l0_intr_pending+0xb
push 0x34 (%eax)
What do you think it could be ? I thought about maybe a hardware
problem but where exactly...
I join my dmesg below
Thanks for your advice !
OpenBSD 4.5-stable (GENERIC) #9: Sun May 17 22:59:17 CEST 2009
r...@arwen.saintlo.fr:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) III CPU family 1266MHz ("GenuineIntel"
686-class) 1.27 GHz
cpu0:
>
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,
>> FXSR,SSE
real mem = 267988992 (255MB)
avail mem = 250839040 (239MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @
0xf, SMBIOS rev. 2.3 @ 0xec000 (31 entries)
bios0: vendor Compaq version "D11" date 01/29/2002
bios0: Compaq ProLiant ML350 G2
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC SPCR
acpi0: wakeup devices PBTN(S5)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
cpu0 at mainbus0: apid 3 (boot processor)
cpu0: apic clock running at 132MHz
ioapic0 at mainbus0: apid 8 pa 0xfec0, version 11, 16 pins
ioapic0: misconfigured as apic 0, remapped to apid 8
ioapic1 at mainbus0: apid 2 pa 0xfec01000, version 11, 16 pins
ioapic1: misconfigured as apic 0, remapped to apid 2
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (PCI1)
acpicpu0 at acpi0
acpitz0 at acpi0: critical temperature 31 degC
acpibtn0 at acpi0: PBTN
bios0: ROM list: 0xc/0x8000 0xc8000/0x1800 0xc9800/0x1800
0xcb000/0x1800 0xcc800/0x4000! 0xd0800/0x1800 0xee000/0x2000!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20LE Host" rev 0x06
pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20LE Host" rev 0x06
pci1 at pchb1 bus 2
em0 at pci1 dev 1 function 0 "Intel PRO/1000T (82544GC)" rev 0x02:
apic 2 int 0 (irq 5), address 00:02:b3:b9:0d:a4
em1 at pci1 dev 2 function 0 "Intel PRO/1000T (82544GC)" rev 0x02:
apic 2 int 2 (irq 15), address 00:02:b3:b9:0d:7d
re0 at pci1 dev 3 function 0 "D-Link Systems DGE-528T" rev 0x10:
RTL8169/8110SB (0x1000), apic 2 int 4 (irq 15), address
> 00:1c:f0:6f:38:7e
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 3
cac0 at pci1 dev 4 function 0 "DEC Compaq SMART RAID 42xx" rev 0x01:
apic 2 int 6 (irq 11), Smart Array 431
scsibus0 at cac0: 1 targets
sd0 at scsibus0 targ 0 lun 0: SCSI2 0/direct
fixed
sd0: 34727MB, 512 bytes/sec, 71122560 sec total
re1 at pci1 dev 5 function 0 "D-Link Systems DGE-528T" rev 0x10:
RTL8169/8110SB (0x1000), apic 2 int 8 (irq 15), address
> 00:1c:f0:62:eb:12
rgephy1 at re1 phy 7: RTL8169S/81
MAGNETOTHERAPY
MAGNETOTHERAPY After two weeks of tour around Australian lands, the Venezuelan surfer Magnum “Magneto” Martínez is back in Carlsbad (California) to recharge batteries. Manly Beach, Dee Why, Narrabeen, Avalon and some other Sidney’s northern beaches were some of the points chosen by the member of the Quiksilver team. He also went to Gold Coast and Sunshine Coast where he visited Noosa Heads. We will see the trip at Gravedad Zero (ESPN) in a few days, and the show will also include Tom Carroll and Layne Beachley who were interviewed by Gravedad Zero. Relaxed at his home, Magneto talked to Surfpress about the days in Australia, the The Lab Project and some other issues that are part of the Magnetotherapy. “We shared some sessions with Tom Carroll at his home town Avalon and we surfed in the beach where he grew up surfing, which is called North Avalon. I also went to Dee Why with Tobby Martin, a respected local surfer and an former WCT competitor . We had the chance to visit Gold Coast with Troy Brooks and we surfed several spots such as Currumbin, Duranbah and Surfers Paradise among others. We also went to Layne (Beachley)’s home where we interviewed her". Tom Carroll at home. Which was your highest moment of this first part of the year? There are many. Seeing the place where I will be building my home, God willing! When I got back from Australia I could readjust some things in my life and in my surfing and that has helped me to feel free and relaxed in the last weeks… And the wedding of my great friend Otto (Flores) was also a nice experience to me. What competitions have you planned to participate in on this second part of the year? This year I’ve changed my focus a bit, I’ m not participating in as many competitions, but I’ve planned to go to: the US Open, the ISA World Championship in Costa Rica if the Venezuelan team wants me to, the QUIKSILVER WQS at Puerto Escondido in August, the WQS at Newport Beach, maybe the Cold Water Classic at Santa Cruz (California) and it could be possible that I also go to some ALAS like in Venezuela and in Costa Rica. The last two great WQS events that were organized in Latin American countries (Mexico and Chile) were won by Latin surfers. Why do you think there are no more events in places like Costa Rica, Panama or El Salvador which have great conditions for the Latin surfers to stand out? Costa Rica and Panama have been the venue of WQS and ASP events in previous years, where a lot of international surfers have competed, not only Latin surfers. These events were very productive for Latin America, but the price of a WQS’s sanction is pretty high and many companies prefer to avoid these costs and to have events without this sanction. The difference is that a WQS event helps you to get points to gain, maintain or improve your position on the ASP ranking. And if the event takes place in Latin America that will obviously benefit Latin surfers and will give them more and better international acknowledgement. This also helps the industry and the local talent to get involve in such important events. What’s the The Lab Project? The LAB is a Project some friends of mine and I have been working in the last year and a half. We are a very talented group in many areas, with a great potential of marketing and promotion of different products related to surfing. This will help many Latin American countries to develop a surfing industry and to encourage the local talent through the availability of high quality products at a lower cost. And above all, we offer technical and informative advising for the benefit of our clients and of the audience in general. We are a company formed by Latin American people, represented by Latin American people and made for Latin American people with the best world wide quality. More importantly, is our commitment to the environment and the fact that we need to pay a lot closer attention to it before is too late to make the changes in our life style and the products we create and consume, hence, The Lab will be look to stimulate individuals and regions in creating the consciousness necessary to improve our environment and to live in harmony with Mother Nature. How was the spring time at California? We had some south and south-west swells that didn’t stop breaking for at least two weeks. I have had the chance to practice for hours in the last weeks at Lowers Trestles one of the best breaks of the area. I have surfed with pros like Chris Ward, Damien Hobgood and Rusty Long among others and a lot of top juniors of the country. Lowers is the place in the summer, where most action and talent come together in the whole coast of the USA. Have you been testing new boards? Have you tested new models after the revolution Kelly Slater is promoting with those really innovative measures? I haven't really changed my dimensions at all. Kelly is Kelly, he's got a unique ability and he's looking fo
Re: random crashes on a firewall with OpenBSD 4.5-stable
On Thu, Jun 25, 2009 at 05:23:40PM +0200, Com??te wrote:
> Hi,
>
> we are using the last OpenBSD 4.5-stable release on an old Compaq
> Proliant ML350 as a firewall with spamd. But we encounter randomly some
> system crashes (once a week or two weeks). The system always displays
> the same message:
>
> uvm_fault (0xd080d9e00x0,0,1) -> e
>
> kernel: page fault trap, code=0
>
> Stopped at cac_pci_l0_intr_pending+0xb
> push 0x34 (%eax)
The function name gives it away. 99% cac(4) is causing your problem.
Connect the drive to another scsi controller and if possible disable the
compaq thing in the bios.
>
> What do you think it could be ? I thought about maybe a hardware problem
> but where exactly...
>
> I join my dmesg below
>
> Thanks for your advice !
>
> OpenBSD 4.5-stable (GENERIC) #9: Sun May 17 22:59:17 CEST 2009
> r...@arwen.saintlo.fr:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel(R) Pentium(R) III CPU family 1266MHz ("GenuineIntel"
> 686-class) 1.27 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
> real mem = 267988992 (255MB)
> avail mem = 250839040 (239MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf,
> SMBIOS rev. 2.3 @ 0xec000 (31 entries)
> bios0: vendor Compaq version "D11" date 01/29/2002
> bios0: Compaq ProLiant ML350 G2
> acpi0 at bios0: rev 0
> acpi0: tables DSDT FACP APIC SPCR
> acpi0: wakeup devices PBTN(S5)
> acpitimer0 at acpi0: 3579545 Hz, 32 bits
> acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
> cpu0 at mainbus0: apid 3 (boot processor)
> cpu0: apic clock running at 132MHz
> ioapic0 at mainbus0: apid 8 pa 0xfec0, version 11, 16 pins
> ioapic0: misconfigured as apic 0, remapped to apid 8
> ioapic1 at mainbus0: apid 2 pa 0xfec01000, version 11, 16 pins
> ioapic1: misconfigured as apic 0, remapped to apid 2
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 2 (PCI1)
> acpicpu0 at acpi0
> acpitz0 at acpi0: critical temperature 31 degC
> acpibtn0 at acpi0: PBTN
> bios0: ROM list: 0xc/0x8000 0xc8000/0x1800 0xc9800/0x1800
> 0xcb000/0x1800 0xcc800/0x4000! 0xd0800/0x1800 0xee000/0x2000!
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20LE Host" rev 0x06
> pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20LE Host" rev 0x06
> pci1 at pchb1 bus 2
> em0 at pci1 dev 1 function 0 "Intel PRO/1000T (82544GC)" rev 0x02: apic
> 2 int 0 (irq 5), address 00:02:b3:b9:0d:a4
> em1 at pci1 dev 2 function 0 "Intel PRO/1000T (82544GC)" rev 0x02: apic
> 2 int 2 (irq 15), address 00:02:b3:b9:0d:7d
> re0 at pci1 dev 3 function 0 "D-Link Systems DGE-528T" rev 0x10:
> RTL8169/8110SB (0x1000), apic 2 int 4 (irq 15), address 00:1c:f0:6f:38:7e
> rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 3
> cac0 at pci1 dev 4 function 0 "DEC Compaq SMART RAID 42xx" rev 0x01:
> apic 2 int 6 (irq 11), Smart Array 431
> scsibus0 at cac0: 1 targets
> sd0 at scsibus0 targ 0 lun 0: SCSI2 0/direct fixed
> sd0: 34727MB, 512 bytes/sec, 71122560 sec total
> re1 at pci1 dev 5 function 0 "D-Link Systems DGE-528T" rev 0x10:
> RTL8169/8110SB (0x1000), apic 2 int 8 (irq 15), address 00:1c:f0:62:eb:12
> rgephy1 at re1 phy 7: RTL8169S/8110S PHY, rev. 3
> fxp0 at pci0 dev 1 function 0 "Intel 8255x" rev 0x08, i82559: apic 2 int
> 10 (irq 5), address 00:02:a5:44:33:f7
> inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
> ahc0 at pci0 dev 2 function 0 "Adaptec AHA-3960D U160" rev 0x01: apic 2
> int 11 (irq 11)
> scsibus1 at ahc0: 16 targets, initiator 7
> ahc1 at pci0 dev 2 function 1 "Adaptec AHA-3960D U160" rev 0x01: apic 2
> int 11 (irq 11)
> scsibus2 at ahc1: 16 targets, initiator 7
> st0 at scsibus2 targ 6 lun 0: SCSI2
> 1/sequential removable
> fxp1 at pci0 dev 4 function 0 "Intel 8255x" rev 0x08, i82559: apic 2 int
> 13 (irq 10), address 00:08:02:45:29:64
> inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 4
> vga1 at pci0 dev 5 function 0 "ATI Rage XL" rev 0x27
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> "Compaq Netelligent ASMC" rev 0x00 at pci0 dev 6 function 0 not configured
> piixpm0 at pci0 dev 15 function 0 "ServerWorks CSB5" rev 0x92: polling
> iic0 at piixpm0
> iic0: addr 0x28 00=a0 01=10 02=03 03=01 04=7f 05=04 06=03 07=00 08=00
> 09=00 0b=00 0c=03 0d=41 0e=02 0f=00 10=00 11=05 18=3a 19=10 20=ff 21=ff
> 28=00 29=00 2a=04 2b=00 2c=00 2d=00 2e=00 30=00 31=00 32=00 38=00 39=00
> 3a=00 3b=00 3c=00 3d=00 3e=00 40=08 41=08 42=80 48=03 49=03 4a=03 50=00
> 51=80 58=00 59=00 60=f0 61=f0 68=af 69=af 70=ff 71=00 78=ff 79=ff 80=2b
> 81=37 82=ff 88=f0 89=f0 8a=f0 90=3c 91=46 92=ff 98=37 99=41 9a=ff a0=22
> a1=2d a2=80 a8=ff a9=ff b0=00 b1=00 b8=06 b9=00 words 00=a0a0 01=1010
> 02=0303 03=0101 04=7f7f 05=0404 06=0303 07=
> spdmem0 at iic0 addr 0x50: 256MB SDRAM registered ECC PC133CL2
> pciide0 at pci0 dev 15 function 1 "ServerWorks CSB5 IDE" rev
The 1st HYIP with Guaranteed Principal
If you want to lock in a unvarying monthly income stream from your portfolio, then it's time to overlook your investments. Thanks to the introduction of a brand new assets, there's a whole new world of daily income just waiting for you. Plenty of people are already using these new ways to generate a fat dividends weekly. For profits junkies, there's nothing sweeter than a solid yield. So if you get a impassion from cashing a huge swarm of dividends, then you're missing effectively on some of the highest profit on the planet. I'm speaking about what has been the most important financial invention - http://groups.yahoo.com/group/qykimazyvuzoj86/message/1
Re: random crashes on a firewall with OpenBSD 4.5-stable
No problem with the PSU and voltage limits. The PSU isn't used at its
full capacity and the other servers plugged on it work well.
Could it be a bad network interface ?
Michal a icrit :
Just stabbing the dark here, test your Voltage Rails on your PSU. Check they
are within limits. I find unexplained crash's can be traced back to PSU's
quite often
-Original Message-
From: owner-m...@openbsd.org [mailto:owner-m...@openbsd.org] On Behalf Of
Comhte
Sent: 26 June 2009 12:22
To: Misc OpenBSD
Cc: Daniel Gracia Garallar
Subject: Re: random crashes on a firewall with OpenBSD 4.5-stable
Well i have tested the RAM with memtest, no error.
maybe another idea ?
Thanks
Daniel Gracia Garallar a C)crit :
Oh and maybe bad RAM; I've hit some nasty errors with these faulty
DIMMs... :/
ComC(te escribiC3:
Hi,
we are using the last OpenBSD 4.5-stable release on an old Compaq
Proliant ML350 as a firewall with spamd. But we encounter randomly
some system crashes (once a week or two weeks). The system always
displays the same message:
uvm_fault (0xd080d9e00x0,0,1) -> e
kernel: page fault trap, code=0
Stopped at cac_pci_l0_intr_pending+0xb
push 0x34 (%eax)
What do you think it could be ? I thought about maybe a hardware
problem but where exactly...
I join my dmesg below
Thanks for your advice !
OpenBSD 4.5-stable (GENERIC) #9: Sun May 17 22:59:17 CEST 2009
r...@arwen.saintlo.fr:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) III CPU family 1266MHz ("GenuineIntel"
686-class) 1.27 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,
FXSR,SSE
real mem = 267988992 (255MB)
avail mem = 250839040 (239MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @
0xf, SMBIOS rev. 2.3 @ 0xec000 (31 entries)
bios0: vendor Compaq version "D11" date 01/29/2002
bios0: Compaq ProLiant ML350 G2
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC SPCR
acpi0: wakeup devices PBTN(S5)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
cpu0 at mainbus0: apid 3 (boot processor)
cpu0: apic clock running at 132MHz
ioapic0 at mainbus0: apid 8 pa 0xfec0, version 11, 16 pins
ioapic0: misconfigured as apic 0, remapped to apid 8
ioapic1 at mainbus0: apid 2 pa 0xfec01000, version 11, 16 pins
ioapic1: misconfigured as apic 0, remapped to apid 2
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (PCI1)
acpicpu0 at acpi0
acpitz0 at acpi0: critical temperature 31 degC
acpibtn0 at acpi0: PBTN
bios0: ROM list: 0xc/0x8000 0xc8000/0x1800 0xc9800/0x1800
0xcb000/0x1800 0xcc800/0x4000! 0xd0800/0x1800 0xee000/0x2000!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20LE Host" rev 0x06
pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20LE Host" rev 0x06
pci1 at pchb1 bus 2
em0 at pci1 dev 1 function 0 "Intel PRO/1000T (82544GC)" rev 0x02:
apic 2 int 0 (irq 5), address 00:02:b3:b9:0d:a4
em1 at pci1 dev 2 function 0 "Intel PRO/1000T (82544GC)" rev 0x02:
apic 2 int 2 (irq 15), address 00:02:b3:b9:0d:7d
re0 at pci1 dev 3 function 0 "D-Link Systems DGE-528T" rev 0x10:
RTL8169/8110SB (0x1000), apic 2 int 4 (irq 15), address 00:1c:f0:6f:38:7e
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 3
cac0 at pci1 dev 4 function 0 "DEC Compaq SMART RAID 42xx" rev 0x01:
apic 2 int 6 (irq 11), Smart Array 431
scsibus0 at cac0: 1 targets
sd0 at scsibus0 targ 0 lun 0: SCSI2 0/direct
fixed
sd0: 34727MB, 512 bytes/sec, 71122560 sec total
re1 at pci1 dev 5 function 0 "D-Link Systems DGE-528T" rev 0x10:
RTL8169/8110SB (0x1000), apic 2 int 8 (irq 15), address 00:1c:f0:62:eb:12
rgephy1 at re1 phy 7: RTL8169S/8110S PHY, rev. 3
fxp0 at pci0 dev 1 function 0 "Intel 8255x" rev 0x08, i82559: apic 2
int 10 (irq 5), address 00:02:a5:44:33:f7
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
ahc0 at pci0 dev 2 function 0 "Adaptec AHA-3960D U160" rev 0x01: apic
2 int 11 (irq 11)
scsibus1 at ahc0: 16 targets, initiator 7
ahc1 at pci0 dev 2 function 1 "Adaptec AHA-3960D U160" rev 0x01: apic
2 int 11 (irq 11)
scsibus2 at ahc1: 16 targets, initiator 7
st0 at scsibus2 targ 6 lun 0: SCSI2
1/sequential removable
fxp1 at pci0 dev 4 function 0 "Intel 8255x" rev 0x08, i82559: apic 2
int 13 (irq 10), address 00:08:02:45:29:64
inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 4
vga1 at pci0 dev 5 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Compaq Netelligent ASMC" rev 0x00 at pci0 dev 6 function 0 not
configured
piixpm0 at pci0 dev 15 function 0 "ServerWorks CSB5" rev 0x92: polling
iic0 at piixpm0
iic0: addr 0x28 00=a0 01=10 02=03 03=01 04=7f 05=04 06=03 07=00 08=00
09=00 0b=00 0c=03 0d=41 0e=02 0f=00 10=00 11=05 18=3a 19=10 20=ff
21=ff 28=00 29=00 2a=04 2b=00 2c=00 2d=00 2e=00 30=00 31=00 32=00
38=00 39=00 3a=00 3b=00 3c=00 3d=00 3e=00 40=08 41=08 42=80 48=03
49=03 4a=03 50=0
Re: About the OpenBSD repository
There's also ample room for improvements in some of the algorithms cvs currently use. It positively SUCKS at merging stuff. It can't even work with its own keywords properly. I no longer count the number of times I've had a *conflict* after a merge on code I committed myself in another tree, just because cvs is stupid enough to not recognize $OpenBSD: 1.1$ vs. $OpenBSD: 1.3$ And we all know that branch-merging doesn't actually work. The process to merge branches I used in the past was: - create the diff I want to use - checkout a pristine tree and apply the diff by hand. - checkout the tree I'm going to work on. - use the cvs merge/commit operations. - wipe out the work tree - cvs check out the result - compare against what I would like to have. - fix all the stupid mistakes cvs did. YES, it is THAT bad. I've done enough gcc merges to know. Ask matthieu@ as well, each xorg merge shows traces of those issues as well. In particular, cvs does resurrect files I explicitly deleted on the branch, for absolutely no good reason. The source code from GNU cvs is FULL of highly special cases that make absolutely NO SENSE in general, are totally non-documented, and were obviously hacked in because some stupid guy needed it for his own very special project with its own hackish rules. I definitely have high hopes opencvs will be better in that regard eventually. I don't care all that much for speed, but hey, when I see a version control system do dumb mistakes it has no business doing, and needing me to fix obvious stuff like that... there's MASSIVE room for improvements.
Re: random crashes on a firewall with OpenBSD 4.5-stable
Well i have tested the RAM with memtest, no error.
maybe another idea ?
Thanks
Daniel Gracia Garallar a C)crit :
Oh and maybe bad RAM; I've hit some nasty errors with these faulty
DIMMs... :/
ComC(te escribiC3:
Hi,
we are using the last OpenBSD 4.5-stable release on an old Compaq
Proliant ML350 as a firewall with spamd. But we encounter randomly
some system crashes (once a week or two weeks). The system always
displays the same message:
uvm_fault (0xd080d9e00x0,0,1) -> e
kernel: page fault trap, code=0
Stopped at cac_pci_l0_intr_pending+0xb
push 0x34 (%eax)
What do you think it could be ? I thought about maybe a hardware
problem but where exactly...
I join my dmesg below
Thanks for your advice !
OpenBSD 4.5-stable (GENERIC) #9: Sun May 17 22:59:17 CEST 2009
r...@arwen.saintlo.fr:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) III CPU family 1266MHz ("GenuineIntel"
686-class) 1.27 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 267988992 (255MB)
avail mem = 250839040 (239MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @
0xf, SMBIOS rev. 2.3 @ 0xec000 (31 entries)
bios0: vendor Compaq version "D11" date 01/29/2002
bios0: Compaq ProLiant ML350 G2
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC SPCR
acpi0: wakeup devices PBTN(S5)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
cpu0 at mainbus0: apid 3 (boot processor)
cpu0: apic clock running at 132MHz
ioapic0 at mainbus0: apid 8 pa 0xfec0, version 11, 16 pins
ioapic0: misconfigured as apic 0, remapped to apid 8
ioapic1 at mainbus0: apid 2 pa 0xfec01000, version 11, 16 pins
ioapic1: misconfigured as apic 0, remapped to apid 2
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (PCI1)
acpicpu0 at acpi0
acpitz0 at acpi0: critical temperature 31 degC
acpibtn0 at acpi0: PBTN
bios0: ROM list: 0xc/0x8000 0xc8000/0x1800 0xc9800/0x1800
0xcb000/0x1800 0xcc800/0x4000! 0xd0800/0x1800 0xee000/0x2000!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20LE Host" rev 0x06
pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20LE Host" rev 0x06
pci1 at pchb1 bus 2
em0 at pci1 dev 1 function 0 "Intel PRO/1000T (82544GC)" rev 0x02:
apic 2 int 0 (irq 5), address 00:02:b3:b9:0d:a4
em1 at pci1 dev 2 function 0 "Intel PRO/1000T (82544GC)" rev 0x02:
apic 2 int 2 (irq 15), address 00:02:b3:b9:0d:7d
re0 at pci1 dev 3 function 0 "D-Link Systems DGE-528T" rev 0x10:
RTL8169/8110SB (0x1000), apic 2 int 4 (irq 15), address 00:1c:f0:6f:38:7e
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 3
cac0 at pci1 dev 4 function 0 "DEC Compaq SMART RAID 42xx" rev 0x01:
apic 2 int 6 (irq 11), Smart Array 431
scsibus0 at cac0: 1 targets
sd0 at scsibus0 targ 0 lun 0: SCSI2 0/direct
fixed
sd0: 34727MB, 512 bytes/sec, 71122560 sec total
re1 at pci1 dev 5 function 0 "D-Link Systems DGE-528T" rev 0x10:
RTL8169/8110SB (0x1000), apic 2 int 8 (irq 15), address 00:1c:f0:62:eb:12
rgephy1 at re1 phy 7: RTL8169S/8110S PHY, rev. 3
fxp0 at pci0 dev 1 function 0 "Intel 8255x" rev 0x08, i82559: apic 2
int 10 (irq 5), address 00:02:a5:44:33:f7
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
ahc0 at pci0 dev 2 function 0 "Adaptec AHA-3960D U160" rev 0x01: apic
2 int 11 (irq 11)
scsibus1 at ahc0: 16 targets, initiator 7
ahc1 at pci0 dev 2 function 1 "Adaptec AHA-3960D U160" rev 0x01: apic
2 int 11 (irq 11)
scsibus2 at ahc1: 16 targets, initiator 7
st0 at scsibus2 targ 6 lun 0: SCSI2
1/sequential removable
fxp1 at pci0 dev 4 function 0 "Intel 8255x" rev 0x08, i82559: apic 2
int 13 (irq 10), address 00:08:02:45:29:64
inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 4
vga1 at pci0 dev 5 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Compaq Netelligent ASMC" rev 0x00 at pci0 dev 6 function 0 not
configured
piixpm0 at pci0 dev 15 function 0 "ServerWorks CSB5" rev 0x92: polling
iic0 at piixpm0
iic0: addr 0x28 00=a0 01=10 02=03 03=01 04=7f 05=04 06=03 07=00 08=00
09=00 0b=00 0c=03 0d=41 0e=02 0f=00 10=00 11=05 18=3a 19=10 20=ff
21=ff 28=00 29=00 2a=04 2b=00 2c=00 2d=00 2e=00 30=00 31=00 32=00
38=00 39=00 3a=00 3b=00 3c=00 3d=00 3e=00 40=08 41=08 42=80 48=03
49=03 4a=03 50=00 51=80 58=00 59=00 60=f0 61=f0 68=af 69=af 70=ff
71=00 78=ff 79=ff 80=2b 81=37 82=ff 88=f0 89=f0 8a=f0 90=3c 91=46
92=ff 98=37 99=41 9a=ff a0=22 a1=2d a2=80 a8=ff a9=ff b0=00 b1=00
b8=06 b9=00 words 00=a0a0 01=1010 02=0303 03=0101 04=7f7f 05=0404
06=0303 07=
spdmem0 at iic0 addr 0x50: 256MB SDRAM registered ECC PC133CL2
pciide0 at pci0 dev 15 function 1 "ServerWorks CSB5 IDE" rev 0x92: DMA
atapiscsi0 at pciide0 channel 0 drive 0
scsibus3 at atapiscsi0: 2 targets
cd0 at scsibus3 targ 0 lun 0: ATAPI 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
ohci0 at pci0 dev
Re: CARP problem : slave rioting
Hello, CARP is configured using a script. Here it is (truncated version) : ifconfig carp5 create ifconfig carp5 vhid 10 advskew $1 pass $PASS 10.31.0.254/16 description "LAN" ifconfig carp2 create ifconfig carp2 vhid 10 advskew $1 pass $PASS 193.57.199.254/24 description "DMZ 1" ifconfig carp3 create ifconfig carp3 vhid 10 advskew $1 pass $PASS 10.193.57.254/24 description "DMZ 2" ifconfig carp12 create ifconfig carp12 vhid 10 advskew $1 pass $PASS 8.8.0.254/24 description "DMZ 3" ifconfig carp13 create ifconfig carp13 vhid 10 advskew $1 pass $PASS 10.193.70.254/24 description "DMZ 5" ifconfig carp4 create ifconfig carp4 vhid 10 advskew $1 pass $PASS 10.60.0.254/24 description "DMZ Internet" ifconfig carp4 alias 217.109.108.1/24 ifconfig carp14 create ifconfig carp14 vhid 10 advskew $1 pass $PASS 217.109.xxx.xxx/28 description "Internet" -- Cordialement, Pierre BARDOU -Message d'origine- De : uday [mailto:umoorjani@gmail.com] Envoyi : vendredi 26 juin 2009 12:21 @ : BARDOU Pierre Cc : misc@openbsd.org Objet : Re: CARP problem : slave rioting Can you post configuration files for the carp interfaces ? "Nonviolence means avoiding not only external physical violence but also internal violence of spirit. You not only refuse to shoot a man, but you refuse to hate him". Rev. Martin Luther King Jr. On Mon, Jun 22, 2009 at 11:01 AM, BARDOU Pierre wrote: > Hello, > > I have a setup with 2 openBSD boxes used as firewall, redundancy is made using > CARP. > Each has 4 NIC : 1 for internet, 1 for pfsync, and the two last are used as a > trunk, collecting all other VLANs. > Master's advskew is 10, slave's is 50. > All worked like a charm since nearly 2 years, but since 3 weeks I have odd > problems : > * on the net interface, the backup becomes master, but the master remains > master -> Nearly half of the packets are lost > I did a tcpdump on the slave's interface, carp packets from the master arrive. > But it remains master ! > Jun 22 16:42:50.572205 00:00:5e:00:01:0a 01:00:5e:00:00:12 0800 70: > CARPv2-advertise 36: vhid=10 advbase=1 advskew=10 demote=0 (DF) [tos 0x10] > Jun 22 16:42:50.748122 00:00:5e:00:01:0a 01:00:5e:00:00:12 0800 70: > CARPv2-advertise 36: vhid=10 advbase=1 advskew=50 demote=0 (DF) [tos 0x10] > > * on my DMZ interface (vlan 4), the carp is in INIT state. By the way, as it > is part of a trunk, physical connections are good : they work for all other > VLANs. When I shut down the corresponding carp interface on the slave > (ifconfig carp4 down), master becomes master again. > > Could you give me any clue to keep my master in master state ? > > Thank you > > -- > Cordialement, > > Pierre BARDOU > CSIM - Bureau 012 > > Midi Picardie Informatique Hospitalihre > 12 rue Michel Labrousse > BP93668 > F-31036 Toulouse CEDEX 1 > > Til : 05 67 31 90 84 > Fax : 05 34 61 51 00 > Mail : bardo...@mipih.fr
Re: About the OpenBSD repository
> Come on, it is fucking inefficient. The way it checks out *empty > directories* > and then garbage-collects them at the end of an update is beyond stupid. Not that i particularly care; but isn't git incapable of checking out empty directories? Besides that, it is perfectly possible to use git yourself privately alongside whatever the project is using; so I don't really get what the problem is.
Re: About the OpenBSD repository
On Tue, Jun 23, 2009 at 02:17:30PM +0200, Hannah Schroeter wrote:
> Hi!
>
> On Mon, Jun 22, 2009 at 10:16:12PM +0100, Anil Madhavapeddy wrote:
> >Pretty much every single new revision control system can import/export
> >from CVS, so use whatever you want...
>
> I tried git cvsimport on OpenBSD's tree and it failed, alas.
> cvs2svn doesn't grok some peculiarities of OpenBSD's tree either.
Sort of pointless to add more fuel to this discussion, but here it goes:
None of the cvs importers (known to me) can import the src tree.
They all parse the output of cvs log/rlog. That doesn't work because cvs
doesn't escape anything but what is necessary for its rcs file structure
(@ and stuff)
Various places in the src tree have commit messages that contain cvs
log output. panic("I'm confused! Halp!").
Migrating this is some work, likely involves writing your own rcs
parser...
Yes there is sed. If you have too much time in your hands and an amd64
(because it needs to handle 1G+ datasets), you may be able to make it
work. However everyone i've asked gave up.
Next step would be writing open(hg|git) with a license for real men (:P)
>
> Kind regards,
>
> Hannah.
Re: About the OpenBSD repository
On Tue, Jun 23, 2009 at 07:39:41AM -0500, Marco Peereboom wrote: > Manure alert! > > On Tue, Jun 23, 2009 at 02:16:39PM +0200, Hannah Schroeter wrote: > > Hi! > > > > On Mon, Jun 22, 2009 at 02:11:21PM -0500, Marco Peereboom wrote: > > >What is wrong with CVS? And no I am not talking about the hypotheticals > > >and some bugs that exist in the current code (that can also be easily > > >worked around). > > > > - It's *slow* (once you've seen git's speed, both cvs and svn are snails > > against it; hg and bzr might perhaps compare with it, though). > > It isn't slow. I can check out a tree in a minute. Here is a nickel > kid go buy yourself some real disks. Come on, it is fucking inefficient. The way it checks out *empty directories* and then garbage-collects them at the end of an update is beyond stupid.
Re: CARP problem : slave rioting
Can you post configuration files for the carp interfaces ? "Nonviolence means avoiding not only external physical violence but also internal violence of spirit. You not only refuse to shoot a man, but you refuse to hate him". Rev. Martin Luther King Jr. On Mon, Jun 22, 2009 at 11:01 AM, BARDOU Pierre wrote: > Hello, > > I have a setup with 2 openBSD boxes used as firewall, redundancy is made using > CARP. > Each has 4 NIC : 1 for internet, 1 for pfsync, and the two last are used as a > trunk, collecting all other VLANs. > Master's advskew is 10, slave's is 50. > All worked like a charm since nearly 2 years, but since 3 weeks I have odd > problems : > * on the net interface, the backup becomes master, but the master remains > master -> Nearly half of the packets are lost > I did a tcpdump on the slave's interface, carp packets from the master arrive. > But it remains master ! > Jun 22 16:42:50.572205 00:00:5e:00:01:0a 01:00:5e:00:00:12 0800 70: > CARPv2-advertise 36: vhid=10 advbase=1 advskew=10 demote=0 (DF) [tos 0x10] > Jun 22 16:42:50.748122 00:00:5e:00:01:0a 01:00:5e:00:00:12 0800 70: > CARPv2-advertise 36: vhid=10 advbase=1 advskew=50 demote=0 (DF) [tos 0x10] > > * on my DMZ interface (vlan 4), the carp is in INIT state. By the way, as it > is part of a trunk, physical connections are good : they work for all other > VLANs. When I shut down the corresponding carp interface on the slave > (ifconfig carp4 down), master becomes master again. > > Could you give me any clue to keep my master in master state ? > > Thank you > > -- > Cordialement, > > Pierre BARDOU > CSIM - Bureau 012 > > Midi Picardie Informatique Hospitalihre > 12 rue Michel Labrousse > BP93668 > F-31036 Toulouse CEDEX 1 > > Til : 05 67 31 90 84 > Fax : 05 34 61 51 00 > Mail : bardo...@mipih.fr
compiling swt 3.3
Hi there, are there any experiences to compile swt 3.3 under 4.5? I need it for the jameica framework http://willuhn.de/products/jameica/ In the ports there is just swt-3.2.2p0 TIA Andri
8 526 Case per le vacanze, Appartamenti per le vacanze, Hotel
Ferienunterkunft vacation rentals worldwide * secondcasa.com * vacation rentals worldwide * Reuchlinstrasse 23 * 72800 Eningen unter Achalm * Germania * Telefono/Telefax +49 (0)7123 2846889/2846892 * E-Mail i...@secondcasa.com * Greece Gentili signore ed egregi signori, e con piacere che vi presentiamo personalmente secondcasa, il portale per le vacanze unico nel suo genere, ed e con altrettanto piacere che saremmo lieti di darvi il nostro caloroso benvenuto come nuovo inserzionista secondcasa e una piattaforma plurilingue in funzione di intermediario per alloggi di villeggiatura. Se avete altri quesiti il nostro servizio assistenza e a vostra completa disposizione per rispondervi. * Traduzione automatica del vostro annuncio in 20 lingue * Elaborazione sicura e facile gestione degli affitti per le vacanze * Sviluppo sicuro delle richieste di prenotazione * Organizzazione online dell'anagrafica clienti * Ed inoltre avrete a disposizione un sito Internet aggiornabile e dotato di un libro degli ospiti * Statistiche e newsletter * Presentazione dettagliata dei vostri immobili compreso il piano delle prenotazioni e la galleria fotografica * Oltre 8.500 alloggi di villeggiatura in 92 paesi * 949.000 ospiti al mese Approfittate di questa occasione e registratevi oggi stesso: Maggiori informazioni / secondcasa.com ; Distinti saluti, Maik Schmidt Mallorca Toscana New York If you wish to unsubscribe from the Publisher Email Notifications, simply click on this unsubscribe-link.
