Hi,
Any body running Ligitech QuickCam on OpenBSD 4.6 using
http://tamentis.com/projects/openqce/
or any other driver?
I have a QuickCam messenger.
Thanks
--Siju
You can use webcams which use UVC standard
http://en.wikipedia.org/wiki/USB_video_device_class . There is a lot
of them. Mostly you can recognize them by Certifed for Vista/Windows 7
logo. Those cams are supported in OpenBSD, OpenSolaris and others.
Linux has drivers for other cameras too, but
On Thu, 25 Feb 2010 13:25:04 +0530
Siju George sgeorge...@gmail.com wrote:
Hi,
Any body running Ligitech QuickCam on OpenBSD 4.6 using
http://tamentis.com/projects/openqce/
or any other driver?
As far as I know, there are no drivers for cameras other than the
uvideo(4) driver that
On Thu, Feb 25, 2010 at 7:25 AM, daniel d...@redmountainfarm.net wrote:
I'm running 4.6 (release, I think) on a Soekris Net 4501. See dmesg,
below. I recently got a Wistron CM9 (ath) mini-pci card for it (I've
been running, wired-only, for 4-5 years). I'm getting a couple
different error
The 22 Feb snapshot for loongson defaults to only one text console.
Changing /etc/ttys to add extra terminals does not seem to have any effect:
console /usr/libexec/getty std.9600 vt220 off secure
ttyC0 /usr/libexec/getty std.9600 vt220 on secure
ttyC1
I've just installed a server using current and have found that
there are problems with session_destroy(); such that is just
does not work.
The Apache is the installed (1.3) version and PHP is from
packages.
I have tested the same software and setup on a 4.5 Release
(no patches) and there
We don't provide multiple terminals for the loongson platform. You can
use tmux, or start X instead.
http://www.openbsd.org/faq/faq7.html#SwitchConsole
On 2010 Feb 25 (Thu) at 12:20:46 +0200 (+0200), Lars Nooden wrote:
:The 22 Feb snapshot for loongson defaults to only one text console.
:
On Thu, Feb 25, 2010 at 12:20:46PM +0200, Lars Nooden wrote:
The 22 Feb snapshot for loongson defaults to only one text console.
The smfb(4) framebufer just does not support more than one screen.
-Otto
Changing /etc/ttys to add extra terminals does not seem to have any effect:
Hi,
I was attempting to test temperatures under load by running cat
/dev/urandom file and I thought my system had crashed. Instantly when
this command begins the system becomes very unresponsive. All input over ssh
and keyboard attached to the machine has seemingly varying, but significant,
Stuart Henderson wrote:
On 2010-02-23, Chris Bennett ch...@bennettconstruction.biz wrote:
I just upgraded a production server to -current (needed latest PostgreSQL)
Did you upgrade all packages? Specifically, any Perl XS modules must
have been built with a version of Perl matching the
Post output of 'vmstat -i' and read this thread
http://marc.info/?l=openbsd-miscm=126203835608528w=2
On Thu, Feb 25, 2010 at 12:47 PM, Will Storey wsto...@gmail.com wrote:
Hi,
I was attempting to test temperatures under load by running cat
/dev/urandom file and I thought my system had
Any body running Ligitech QuickCam on OpenBSD 4.6 using
http://tamentis.com/projects/openqce/
or any other driver?
I have a QuickCam messenger.
This stuff was an experiment, the code is awful and I don't recommend
using it for anything but morbid curiosity. It only works with the
On Thu, 25 Feb 2010 03:47:24 -0800
Will Storey wsto...@gmail.com wrote:
I'm not sure how relevant this is, but the top output seems to indicate
something:
Memory: Real: 10M/137M act/tot Free: 845M Swap: 0K/2051M used/tot
PID USERNAME PRI NICE SIZE RES STATE WAIT TIMECPU
On Wed, 24 Feb 2010 19:02:15 +
carlos albino garcia grijalba genesi...@hotmail.com wrote:
I foud this:
http://allthatiswrong.wordpress.com/2010/01/20/the-insecurity-of-openbsd/
so ?
_
Hotmail: Trusted email with
On Thu, Feb 25, 2010 at 03:30:47AM -0700, Duncan Patton a Campbell wrote:
I've just installed a server using current and have found that
there are problems with session_destroy(); such that is just
does not work.
The Apache is the installed (1.3) version and PHP is from
packages.
I
Duncan Patton a Campbell campb...@neotext.ca writes:
This is a hatchet job by someone with an axe to grind.
Or simple flamebait. If so, it worked.
Now pretending to take the article seriously for a few moments, I'd
put it this way: the writer has decided that there will be one
specific item
On Wed, 24 Feb 2010, Theo de Raadt wrote:
One of the 10G cards I am using is:
ppb3 at pci3 dev 0 function 0 PLX PEX 8648 rev 0xbb
pci4 at ppb3 bus 5
ppb4 at pci4 dev 4 function 0 PLX PEX 8648 rev 0xbb: apic 1 int 6 (irq 0)
pci5 at ppb4 bus 6
ix0 at pci5 dev 0 function 0 Intel 10GbE SFP+
DHCPd on current serves up leases with no default route. It's been like
that for a long while now and I've not been able to find anything about
a solution.
I notice in particular when connecting with clients from the various
debian-based distros' install CDs. Old CDs (e.g. Ubuntu 5.10, 8.10)
PoE!tovani,
Super ponude za mesec Ljubavi traju do kraja februara!
PodseDamo Vas da iskoristite ponudu za zaljubljene koja Vam je na
raspolaganju joE! samo 3 dana! Najbolje popuste na najpopularnije
proizvode moEete videti ako kliknete ovde!
Ne gubite vreme, prava je prilika da iznenadite onog
On Feb 25, 2010, at 4:58 AM, Aaron Mason wrote:
On Thu, Feb 25, 2010 at 7:25 AM, daniel d...@redmountainfarm.net
wrote:
I'm running 4.6 (release, I think) on a Soekris Net 4501. See dmesg,
below. I recently got a Wistron CM9 (ath) mini-pci card for it (I've
been running, wired-only, for 4-5
On Thu, Feb 25, 2010 at 06:47:32PM +0200, Lars Nooden wrote:
subnet 192.168.100.0 netmask 255.255.255.196 {
option routers 192.168.100.1;
range 192.168.101.9 192.168.101.14;
option domain-name-servers 192.168.101.1;
}
subnet
On 02/25/2010 06:47 AM, Will Storey wrote:
Hi,
I was attempting to test temperatures under load by running cat
/dev/urandom file and I thought my system had crashed. Instantly when
this command begins the system becomes very unresponsive. All input over ssh
and keyboard attached to the machine
I've tried all the suggestions so far but no luck. I can not ever get
/dev/cua* to work properly.
Even cat fails:
# cat /dev/cuaa
ksh: cannot open /dev/cuaa: Device not configured
So the fundamental problem is this Device not configured error. How
is OpenBSD supposed to be configuring
Use arandom.
On Thu, Feb 25, 2010 at 6:47 AM, Will Storey wsto...@gmail.com wrote:
Hi,
I was attempting to test temperatures under load by running cat
/dev/urandom file and I thought my system had crashed. Instantly when
this command begins the system becomes very unresponsive. All input
On 18:47, Thu 25 Feb 10, Lars Nooden wrote:
DHCPd on current serves up leases with no default route. It's been like
that for a long while now and I've not been able to find anything about
a solution.
Once you reread the configuration snippet from your mail it will be
clear. If not, read the
hOn Thu, Feb 25, 2010 at 01:15:29PM -0800, Alex Carver wrote:
I've tried all the suggestions so far but no luck. I can not ever
get /dev/cua* to work properly.
Even cat fails:
# cat /dev/cuaa
ksh: cannot open /dev/cuaa: Device not configured
So the fundamental problem is this
I got this while trying to e-mail f...@openbsd.org just
now:
---
The original message was received at Thu, 25 Feb 2010 14:22:51 -0700 (MST)
from lists.openbsd.org [192.43.244.163]
- The following addresses had permanent fatal errors -
joel
(reason: 550 5.1.1 User unknown)
On Thu, Feb 25, 2010 at 10:45:38PM +0100, Otto Moerbeek wrote:
hOn Thu, Feb 25, 2010 at 01:15:29PM -0800, Alex Carver wrote:
I've tried all the suggestions so far but no luck. I can not ever
get /dev/cua* to work properly.
Even cat fails:
# cat /dev/cuaa
ksh: cannot open
On 2010-02-25, Edwin Eyan Moragas haa...@gmail.com wrote:
hi misc,
this is a follow up on the post i made regarding multiple PPPoE connections.
ah, the thing that mightn't have been apparent with my suggestion
of route-to, is that my default route points out of a normal
ethernet interface,
Hi,
I wanted to test a current snapshot on my machine.
When booting the snapshot, I get
...
trm0 at pci0 dev 9 function 0 Tekram DC-3x5U rev 0x01: apic 2 int 17 (irq 5)
scsibus at trm0: 8 targets, initiator 7
panic: scsi_done called twice on x5 (0xd6197000)
(This is transcribed from paper)
I
Could you post a dmesg of 4.6-release - we don't know a thing about your system.
On Fri, Feb 26, 2010 at 9:05 AM, pet...@schwertfisch.de wrote:
Hi,
I wanted to test a current snapshot on my machine.
When booting the snapshot, I get
...
trm0 at pci0 dev 9 function 0 Tekram DC-3x5U rev
Aaron Mason simplersolut...@gmail.com wrote:
Could you post a dmesg of 4.6-release - we don't know a thing about your
system.
Sure (sorry, I should have thought of this):
OpenBSD 4.6 (GENERIC) #1: Fri Oct 23 17:09:17 CEST 2009
pet...@schwertfisch.de wrote:
Aaron Mason simplersolut...@gmail.com wrote:
Could you post a dmesg of 4.6-release - we don't know a thing about your
system.
Sure (sorry, I should have thought of this):
OpenBSD 4.6 (GENERIC) #1: Fri Oct 23 17:09:17 CEST 2009
Episjeuhe_te tgm die}humsg http://www.e-shop.gr/newsletter/mail-100220.html
cia ma de_te tir pqosvoq]r lar
TGKEVYMIJES PAQACCEKIES 9:00-20:00 STO 211
5000500
Oi til]r isw}oum ap| 20/02/10 l]wqi 06/03/10, ]yr enamtk^seyr tym
apohel\tym jai l|mo cia ta l]kg tou e-shop.gr
Am h]kete ma
On 2010-02-25, Chris Bennett ch...@bennettconstruction.biz wrote:
Stuart Henderson wrote:
On 2010-02-23, Chris Bennett ch...@bennettconstruction.biz wrote:
I just upgraded a production server to -current (needed latest PostgreSQL)
Did you upgrade all packages? Specifically, any Perl
Is it too early for Friday humor? If not, here are some clowns worth
watching:
http://www.youtube.com/watch?v=VjfaCoA2sQk
On Thu, Feb 25, 2010 at 10:04 AM, Pete Vickers p...@systemnet.no wrote:
Hi,
A proxy (squid) server running i368/4.6RELEASE with around 800 users, what
would be a reasonable value to increase kern.maxclusters too, to cure this
:
r...@proxy-s ~ grep mcl /var/log/messages
Dec 10 10:13:43
oh, please also keep /tmp/pkglist around in case anyone wants to see it..
On 2010-02-26, Stuart Henderson s...@spacehopper.org wrote:
On 2010-02-25, Chris Bennett ch...@bennettconstruction.biz wrote:
Stuart Henderson wrote:
On 2010-02-23, Chris Bennett ch...@bennettconstruction.biz wrote:
Otto Moerbeek wrote:
On Thu, Feb 25, 2010 at 10:45:38PM +0100, Otto Moerbeek wrote:
hOn Thu, Feb 25, 2010 at 01:15:29PM -0800, Alex Carver wrote:
I've tried all the suggestions so far but no luck. I can not ever
get /dev/cua* to work properly.
Even cat fails:
# cat /dev/cuaa
ksh: cannot
hi Stuart,
so i guess i should remove the callout from hostname.pppoe to adding a
default route?
thank you for the assist. :)
On Fri, Feb 26, 2010 at 6:28 AM, Stuart Henderson s...@spacehopper.org wrote:
On 2010-02-25, Edwin Eyan Moragas haa...@gmail.com wrote:
hi misc,
this is a follow up
Stuart Henderson wrote:
oh, please also keep /tmp/pkglist around in case anyone wants to see it..
On 2010-02-26, Stuart Henderson s...@spacehopper.org wrote:
On 2010-02-25, Chris Bennett ch...@bennettconstruction.biz wrote:
Stuart Henderson wrote:
On 2010-02-23, Chris Bennett
Stuart Henderson wrote:
oh, please also keep /tmp/pkglist around in case anyone wants to see it..
On 2010-02-26, Stuart Henderson s...@spacehopper.org wrote:
On 2010-02-25, Chris Bennett ch...@bennettconstruction.biz wrote:
Stuart Henderson wrote:
On 2010-02-23, Chris Bennett
Greetings Folks,
Just wanted to ask out if there's anyone that is successful on
building proxychains on OpenBSD? I tried building it on my box (4.6
stable) with the following output:
$ gmake
gmake all-recursive
gmake[1]: Entering directory `/home/pfunix/tor/proxychains-3.1'
Making all in
--snip--
This will filx this particular error.
http://www.freebsd.org/cgi/cvsweb.cgi/ports/net/proxychains/files/patch-proxychains-libproxychains.c?rev=1.1
thanks for the link. I tried the patch... and it gave me the following error
$ gmake
gmake all-recursive
gmake[1]: Entering directory
Stuart Henderson wrote:
oh, please also keep /tmp/pkglist around in case anyone wants to see it..
On 2010-02-26, Stuart Henderson s...@spacehopper.org wrote:
On 2010-02-25, Chris Bennett ch...@bennettconstruction.biz wrote:
Stuart Henderson wrote:
On 2010-02-23, Chris Bennett
On Thu, Feb 25, 2010 at 06:39:23PM -0800, Alexander Carver wrote:
Otto Moerbeek wrote:
On Thu, Feb 25, 2010 at 10:45:38PM +0100, Otto Moerbeek wrote:
hOn Thu, Feb 25, 2010 at 01:15:29PM -0800, Alex Carver wrote:
I've tried all the suggestions so far but no luck. I can not ever
get
On Fri, Feb 26, 2010 at 08:13:31AM +0100, Otto Moerbeek wrote:
On Thu, Feb 25, 2010 at 06:39:23PM -0800, Alexander Carver wrote:
Otto Moerbeek wrote:
On Thu, Feb 25, 2010 at 10:45:38PM +0100, Otto Moerbeek wrote:
hOn Thu, Feb 25, 2010 at 01:15:29PM -0800, Alex Carver wrote:
I've
47 matches
Mail list logo
