Re: Mobile VPN
On Mon, 2010-10-04 at 10:10 -0600, Shiu Lam wrote: Does anyone knows any OpenVPN client for S60 mobile phones? Thanks Claudiu Pruna wrote: On Sat, 2010-10-02 at 11:56 +0300, Evgeniy Sudyr wrote: I was able to get it working with 4.6/4.7 and E60/E65/E52 it works as expected :) Nokia VPN config tool will save hours instead trial by error. On Fri, Oct 1, 2010 at 10:29 PM, Claudiu Pruna clau...@net-go.net wrote: On Fri, 2010-10-01 at 21:19 +0200, David Coppa wrote: On Fri, Oct 1, 2010 at 9:11 PM, Claudiu Pruna clau...@net-go.net wrote: I was wondering has anyone got an S60 mobile phone to connect to OpenBSD Ipsec ? I did some tryies, but no luck. Maybe this is of some use: http://betabug.ch/wiki/VPNNotes I'm sorry, but I have no personal experiences with mobile vpns... cheers, david thanks a lot, sounds very interesting, I will test it and see what happens ;) -- Claudiu Pruna clau...@net-go.net -- -- With regards, Eugene Sudyr Well, I have tried that and ... it works Yes, it is working ok, but if your setup is like mine and after connecting to the ipsec, your internal network contains more branches connected through vpn and in conclusion the internal network contains more unroutable ip address classes, the problem appears because you appear in your network with the ip that your phone gets from the internet connection it has. So it is a little bit tricky to route your phone to other ip classes then the one you are directly connected. I have used in ipsecctl the tag option, and then in pf.conf I have created an nat pool which is just for the phones connecting from outside. But it is a start, I mean, from no vpn (except symbian pptp) until here we allready have a big progress. It would be nice if we could also get working the xauth and ip address assigning to phone through ipsec, but as I am not a developer, I hope it will happen someday. Cheers There isn't any Openvpn client for any mobile phone. -- Claudiu Pruna clau...@net-go.net
ASISTENTES EJECUTIVAS: ÚNICA PRESENTACIÓN OCTUBRE 29 EN PUERTO VALLARTA.
[IMAGE] Mayores informes responda este correo electrsnico con los siguientes datos. Empresa: Nombre: Telifono: Email: Nzmero de Interesados: Y en breve le haremos llegar la informacisn completa del evento. O bien comunmquense a nuestros telifonos un ejecutivo con gusto le atendera Tels. (33) 8851-2365, (33)8851-2741. Copyright (C) 2010, PMS Capacitacisn Efectiva de Mixico S.C. Derechos Reservados. PMS de Mixico, El logo de PMS de Mixico son marcas registradas. ADVERTENCIA PMS de Mixico no cuenta con alianzas estratigicas de ningzn tipo dentro de la Republica Mexicana. NO SE DEJE ENGAQAR - DIGA NO A LA PIRATERIA. Todos los logotipos, marcas comerciales e imagenes son propiedad de sus respectivas corporaciones y se utilizan con fines informativos solamente. Este Mensaje ha sido enviado a misc@openbsd.org como usuario de Pms de Mixico o bien un usuario le refiris para recibir este boletmn. Como usuario de Pms de Mixico, en este acto autoriza de manera expresa que Pms de Mixico le puede contactar vma correo electrsnico u otros medios. Si usted ha recibido este mensaje por error, haga caso omiso de el y reporte su cuenta respondiendo este correo con el subject BAJAASISTENTES Unsubscribe to this mailing list, reply a blank message with the subject UNSUBSCRIBE BAJAASISTENTES Tenga en cuenta que la gestisn de nuestras bases de datos es de suma importancia y no es intencisn de la empresa la inconformidad del receptor.
Re: Mobile VPN
The n900 most certainly can run openvpn.
Re: Mobile VPN
On Tue, Oct 5, 2010 at 8:28 AM, Claudiu Pruna clau...@net-go.net wrote: On Mon, 2010-10-04 at 10:10 -0600, Shiu Lam wrote: Does anyone knows any OpenVPN client for S60 mobile phones? There isn't any Openvpn client for any mobile phone. IPSec support is integrated. You can find the compatibility matrix here: http://europe.nokia.com/support/download-software/nokia-mobile-vpn/compatibility-and-download ciao, David
Is there a method to boot from floopy after booting from CD?
Hello, My name is Topaz. Nice to meet everybady. I'm a windows user now.And Installing OpenBSD is First time. I bought Sony Vaio PCG-U1 about 5 or 6years ago. on this laptop, Windows XP is running.But It's very heavy for this laptop.So I was looking for a lighter OS. I was interested in Linux.But I found OpenBSD while I was serching a OS that I should change from Windows. I got very interested in the belief of OpenBSD.So I decided installing OpenBSD. Even though I met a trouble in front of instalation.I tried 3 CDs cd47.iso , cdemu47.iso And install47.iso.But all of them show the same result.First I can boot every instalation CD.And then The display shows boot . After that, many characters appear.Unless instalation won't continue after the messages below appears. isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 My laptop can be booted by ONLY IEEE1394 connected DVD drive.So I guess the drive isn't supported by OpenBSD.That's why istallation won't continue from the middle.So I'd like to know ways to boot from floppy disk drive or something like that. Maybe It's possible by typing something when boot is shown?
Re: No Livelock on 2 Oct 2010 current
On Tue, Oct 05, 2010 at 11:28:50AM +1000, David Gwynne wrote:
On Mon, Oct 04, 2010 at 10:41:15PM +, Stuart Henderson wrote:
On 2010-10-04, Insan Praja SW insan.pr...@gmail.com wrote:
I can't see any livelocks. I'm aware of new algorithm on mclgeti got
something to do with this, I just want to confirm this. If this systat
output tells me the truth, well that just a huge achievement.
# pstat -d u mcllivelocks
You will probbaly see more livelocks than before (the detection is more
sensitive), but the effect on network traffic should be smaller.
this restores the visibility of network livelocks to systat.
anyone object? if not i'll commit it tomorrow morning around 10am
in a GMT+10 timezeon.
No objections from me. ok k...@.
Ken
Index: sbin/sysctl/sysctl.c
===
RCS file: /cvs/src/sbin/sysctl/sysctl.c,v
retrieving revision 1.173
diff -u -p -r1.173 sysctl.c
--- sbin/sysctl/sysctl.c 19 Aug 2010 18:14:14 - 1.173
+++ sbin/sysctl/sysctl.c 5 Oct 2010 01:20:59 -
@@ -447,6 +447,9 @@ parse(char *string, int flags)
case KERN_CONSDEV:
special |= CHRDEV;
break;
+ case KERN_NETLIVELOCKS:
+ special |= UNSIGNED;
+ break;
}
break;
Index: sys/kern/kern_sysctl.c
===
RCS file: /cvs/src/sys/kern/kern_sysctl.c,v
retrieving revision 1.193
diff -u -p -r1.193 kern_sysctl.c
--- sys/kern/kern_sysctl.c23 Sep 2010 13:24:22 - 1.193
+++ sys/kern/kern_sysctl.c5 Oct 2010 01:21:02 -
@@ -110,6 +110,7 @@ extern int nselcoll, fscale;
extern struct disklist_head disklist;
extern fixpt_t ccpu;
extern long numvnodes;
+extern u_int mcllivelocks;
extern void nmbclust_update(void);
@@ -585,6 +586,8 @@ kern_sysctl(int *name, u_int namelen, vo
else
dev = NODEV;
return sysctl_rdstruct(oldp, oldlenp, newp, dev, sizeof(dev));
+ case KERN_NETLIVELOCKS:
+ return (sysctl_rdint(oldp, oldlenp, newp, mcllivelocks));
default:
return (EOPNOTSUPP);
}
Index: sys/sys/sysctl.h
===
RCS file: /cvs/src/sys/sys/sysctl.h,v
retrieving revision 1.106
diff -u -p -r1.106 sysctl.h
--- sys/sys/sysctl.h 19 Aug 2010 18:14:13 - 1.106
+++ sys/sys/sysctl.h 5 Oct 2010 01:21:03 -
@@ -190,7 +190,8 @@ struct ctlname {
#define KERN_FILE2 73 /* struct: file entries */
#define KERN_RTHREADS 74 /* kernel rthreads support
enabled */
#define KERN_CONSDEV75 /* dev_t: console terminal
device */
-#define KERN_MAXID 76 /* number of valid kern ids */
+#define KERN_NETLIVELOCKS 76 /* int: number of network
livelocks */
+#define KERN_MAXID 77 /* number of valid kern ids */
#define CTL_KERN_NAMES { \
{ 0, 0 }, \
@@ -269,6 +270,7 @@ struct ctlname {
{ file2, CTLTYPE_STRUCT }, \
{ rthreads, CTLTYPE_INT }, \
{ consdev, CTLTYPE_STRUCT }, \
+ { netlivelocks, CTLTYPE_INT }, \
}
/*
Index: usr.bin/systat/mbufs.c
===
RCS file: /cvs/src/usr.bin/systat/mbufs.c,v
retrieving revision 1.29
diff -u -p -r1.29 mbufs.c
--- usr.bin/systat/mbufs.c23 Sep 2010 10:49:55 - 1.29
+++ usr.bin/systat/mbufs.c5 Oct 2010 01:21:04 -
@@ -41,6 +41,7 @@ struct mclpool_info {
int mclpool_count = 0;
int mbpool_index = -1;
struct pool mbpool;
+u_int mcllivelocks = 0;
/* interfaces */
static int num_ifs;
@@ -198,6 +199,15 @@ read_mb(void)
int i, p, nif, ret = 1;
size_t size;
+ mib[0] = CTL_KERN;
+ mib[1] = KERN_NETLIVELOCKS;
+ size = sizeof(mcllivelocks);
+ if (sysctl(mib, 2, mcllivelocks, size, NULL, 0) 0
+ errno != EOPNOTSUPP) {
+ error(sysctl(KERN_NETLIVELOCKS));
+ goto exit;
+ }
+
num_disp = 0;
if (getifaddrs(ifap)) {
error(getifaddrs: %s, strerror(errno));
@@ -341,6 +351,7 @@ showmbuf(struct if_info *ifi, int p, int
print_fld_str(FLD_MB_IFACE, ifi-name);
if (p == -1 ifi == interfaces) {
+ print_fld_uint(FLD_MB_LLOCKS, mcllivelocks);
print_fld_size(FLD_MB_MSIZE, mbpool.pr_size);
print_fld_size(FLD_MB_MALIVE, mbpool.pr_nget - mbpool.pr_nput);
print_fld_size(FLD_MB_MHWM, mbpool.pr_hiwat);
@@ -349,8 +360,6 @@ showmbuf(struct if_info *ifi, int p, int
#if NOTYET
print_fld_uint(FLD_MB_RXDELAY, ifi-data.ifi_rxdelay);
print_fld_uint(FLD_MB_TXDELAY,
Real Cast Iron Witches Cauldrons for Halloween
Please click here if the e-mail below is not displayed correctly Cast in Style www.castinstyle.co.uk Beautiful Cast Iron Home and Garden Ware Clothes Airers Pot Racks Bells Bolts, Latches Hinges Boot Scrapers Pulls Brackets Cabinet Knobs Clocks Cookware Door Knobs Handles Door Furniture Door Knockers Door Mats Door Stops Drawer Handles Pulls Electrical Switches Fires Fire baskets Garden Gate Furniture Hat Coat Hooks Homeware Kitchenware Letterboxes Rim Locks Latches Signs Sun Dials Trivets Wall Art Window Furniture Wine Racks Cauldron for haloween cast iron Remove me from this newsletter
Re: Mobile VPN
On Tue, Oct 5, 2010 at 9:25 AM, Jussi Peltola pe...@pelzi.net wrote: The n900 most certainly can run openvpn. Android phones can too: http://code.google.com/p/android-openvpn-settings/ ciao, david
Re: kernel hangs by many connections (reproducable)
On Sun, Sep 12, 2010 at 11:26 +0600, Anton Maksimenkov wrote:
Hello.
I use my OBSD machine to test some server on another machine. They are
connected by pathcord, 1Gbit network cards are used.
Test program (uses kqueue) do many (I want thousands) connections to
server. Write query, read answer.
And it tries to keep that much connections by doing as much new
connections as needed.
When number of connections kept below 100 - all ok. But if I raise
them (upto about 500-1000) the program start these connections, do
some write/read (show about 10-20 successful reads) and the kernel
hangs. 1-2 sec after start.
Tweaks - kern.maxfiles=16384 and openfiles-cur/max=8192 for my user.
Info from ddb (see dmesg below):
ddb show panic
the kernel did not panic
ddb trace
Debugger(0,3f8,0,0,1) at Debugger+0x4
comintr(d1571000) at comintr+0x287
Xrecurse_legacy4() at Xrecurse_legacy4+0xb3
--- interrupt ---
pool_do_get(d0a10b60,0,0,0,60) at pool_do_get+0x2c2
pool_get(d0a10b60,0,8000,0,0) at pool_get+0x54
m_gethdr(1,1,8000,369e99,0) at m_gethdr+0x39
m_clget(0,1,d1526054,800,d03e1aeb) at m_clget+0x10a
re_newbuf(d1526000,10,d999eb48,d02b30cc,d1526000) at re_newbuf+0x35
re_rx_list_fill(d1526000,20,60,58,d1520010) at re_rx_list_fill+0x21
re_rxeof(d1526000,d9799800,3e,10,10) at re_rxeof+0x37c
re_intr(d1526000) at re_intr+0x12a
Xrecurse_legacy11() at Xrecurse_legacy11+0xb7
--- interrupt ---
filt_soread(d9a5bdc0,0,0,d9a5bd98,d9a5bd98) at filt_soread+0x1
selwakeup(d9a5bdbc,d9b08300,d9b08200,d9b08300,d9a5bd98) at selwakeup+0x22
sowakeup(d9a5bd4c,d9a5bd98,14,d999ed24,1) at sowakeup+0x1d
tcp_input(d9b08300,14,0,0,6) at tcp_input+0x26ac
ipv4_input(d9b08300,0,d999ede8,d0202089,d03d0058) at ipv4_input+0x42a
ipintr(d03d0058,d09e0010,10,d5d10010,d09e72c0) at ipintr+0x49
Bad frame pointer: 0xd999ede8
there's a forgotten splx in the driver. that explains why system
appears to be hung. OK?
Index: re.c
===
RCS file: /home/cvs/src/sys/dev/ic/re.c,v
retrieving revision 1.128
diff -u -p -u -p -r1.128 re.c
--- re.c27 Aug 2010 17:08:00 - 1.128
+++ re.c5 Oct 2010 08:27:05 -
@@ -2042,8 +2042,10 @@ re_init(struct ifnet *ifp)
if (sc-sc_hwrev != RL_HWREV_8139CPLUS)
CSR_WRITE_2(sc, RL_MAXRXPKTLEN, 16383);
- if (sc-rl_testmode)
+ if (sc-rl_testmode) {
+ splx(s);
return (0);
+ }
mii_mediachg(sc-sc_mii);
Re: kernel hangs by many connections (reproducable)
On Tue, Oct 05, 2010 at 10:35:28AM +0200, Mike Belopuhov wrote:
there's a forgotten splx in the driver. that explains why system
appears to be hung. OK?
While this is a bug and should be fixed, we never actually call that codepath
as only re_diag sets testmode and we never call that :)
Index: re.c
===
RCS file: /home/cvs/src/sys/dev/ic/re.c,v
retrieving revision 1.128
diff -u -p -u -p -r1.128 re.c
--- re.c 27 Aug 2010 17:08:00 - 1.128
+++ re.c 5 Oct 2010 08:27:05 -
@@ -2042,8 +2042,10 @@ re_init(struct ifnet *ifp)
if (sc-sc_hwrev != RL_HWREV_8139CPLUS)
CSR_WRITE_2(sc, RL_MAXRXPKTLEN, 16383);
- if (sc-rl_testmode)
+ if (sc-rl_testmode) {
+ splx(s);
return (0);
+ }
mii_mediachg(sc-sc_mii);
¡CÓMO HACER CRECER SU NEGOCIO! SEMINARIO DE CRECIMIENTO PARA PYMES OCTUBRE 26.
Csmo Enfrentar con Ixito los Retos en las PYMES !Znico dma! Octubre 26 Mixico, D.F. Pms Capacitacisn Efectiva de Mixico . tiene el placer de invitarle a participar en este exclusivo seminario. Nuestro programa se compone de 4 conferencias impartidas por tres expertos consultores en el ramo empresarial los cuales expondran puntos relevantes y soluciones a los retos a los cuales las Pymes se enfrentan diariamente. !Participe y NO deje pasar esta oportunidad! ?A quiin va dirigido? Directores , Gerentes, Empresarios, Emprendedores , Profesionistas con visisn empresarial y en general Lmderes dispuestos a ser agentes de cambio en el ambito laboral. !El momento es Hoy! Este seminario ampliara su visisn y le brindara opciones que le permitan dirigir su compaqma con el liderazgo requerido y consolidar la posicisn de su empresa en el mercado. ?Por qui Asistir? Es una excelente oportunidad para obtener estrategias efectivas y de aplicacisn practica e inmediata que le apoyen a detonar la productividad y crecimiento de su empresa. !Solicite mas informacisn de este seminario impartido por 3 Expertos! !Promociones Especiales para Grupos! Mayores informes responda este correo electrsnico con los siguientes datos. Empresa: Nombre: Telifono: Email: Nzmero de Interesados: Y en breve le haremos llegar la informacisn completa del evento. O bien comunmquense a nuestros telifonos un ejecutivo con gusto le atendera Tels. (33) 8851-2365, (33)8851-2741. Copyright (C) 2010, PMS Capacitacisn Efectiva de Mixico S.C. Derechos Reservados. PMS de Mixico, El logo de PMS de Mixico son marcas registradas. ADVERTENCIA PMS de Mixico no cuenta con alianzas estratigicas de ningzn tipo dentro de la Republica Mexicana. NO SE DEJE ENGAQAR - DIGA NO A LA PIRATERIA. Todos los logotipos, marcas comerciales e imagenes son propiedad de sus respectivas corporaciones y se utilizan con fines informativos solamente. Este Mensaje ha sido enviado a misc@openbsd.org como usuario de Pms de Mixico o bien un usuario le refiris para recibir este boletmn. Como usuario de Pms de Mixico, en este acto autoriza de manera expresa que Pms de Mixico le puede contactar vma correo electrsnico u otros medios. Si usted ha recibido este mensaje por error, haga caso omiso de el y reporte su cuenta respondiendo este correo con el subject BAJAPYMES Unsubscribe to this mailing list, reply a blank message with the subject UNSUBSCRIBE BAJAPYMES Tenga en cuenta que la gestisn de nuestras bases de datos es de suma importancia y no es intencisn de la empresa la inconformidad del receptor.
Re: Is there a method to boot from floopy after booting from CD?
On Tue, 5 Oct 2010 15:55:31 +0900 (JST) z6w...@yahoo.co.jp wrote: laptop can be booted by ONLY IEEE1394 connected DVD drive.So I Firewire is not supported in OpenBSD. middle.So I'd like to know ways to boot from floppy Look here: http://www.openbsd.org/faq/faq4.html#DosFlop You have to prepare an installation floppy disk and boot from it; don't use the CD. Then just follow the information on that page. When the setup asks you where the remaining files are, you have to choose ftp or http, since the CD won't be accessible. kind regards, Robert
Looking for New Customers?
E-mail Marketing 1.0 is a software to find contacts and send email. With it you will have more buyers for their products or services. http://www.emailmasivo.com Enter to our website to test the software free of charge or ask any questions that you have* * Use the contact form that is on our website.
Re: OpenBSD Vim Programming FAQ
I'm sorry. My bad. PDF Version http://dl.dropbox.com/u/9017966/OpenBSDDevelopementandVimProgrammingGuide.pdf HTML Version http://dl.dropbox.com/u/9017966/OpenBSDDevelopementandVimProgrammingGuide.zip
Re: Is there a method to boot from floopy after booting from CD?
Hello, My name is Topaz. Nice to meet everybady. I'm a windows user now.And Installing OpenBSD is First time. I bought Sony Vaio PCG-U1 about 5 or 6years ago. on this laptop, Windows XP is running.But It's very heavy for this laptop.So I was looking for a lighter OS. I was interested in Linux.But I found OpenBSD while I was serching a OS that I should change from Windows. I got very interested in the belief of OpenBSD.So I decided installing OpenBSD. Even though I met a trouble in front of instalation.I tried 3 CDs cd47.iso , cdemu47.iso And install47.iso.But all of them show the same result.First I can boot every instalation CD.And then The display shows boot . After that, many characters appear.Unless instalation won't continue after the messages below appears. isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 My laptop can be booted by ONLY IEEE1394 connected DVD drive.So I guess the drive isn't supported by OpenBSD.That's why istallation won't continue from the middle.So I'd like to know ways to boot from floppy disk drive or something like that. Maybe It's possible by typing something when boot is shown? Hi Topaz, you could try to install OpenBSD from an usb key (http://azbsd.org/~marco/openbsd/flashkeyinstaller/) Or if you have a usb floppy drive, you can use : http://ftp.openbsd.org/pub/OpenBSD/4.7/i386/floppy47.fs More information about all ways to install, here : http://www.openbsd.org/faq/faq4.html Regards, Guillaume.
Re: OpenBSD Vim Programming FAQ
I'll publish my .vimrc when I get home. 2010/10/5 David Coppa dco...@gmail.com: On Tue, Oct 5, 2010 at 11:38 AM, Tomas Vavrys vav...@cleancode.cz wrote: I'm sorry. My bad. PDF Version http://dl.dropbox.com/u/9017966/OpenBSDDevelopementandVimProgrammingGuide.pdf HTML Version http://dl.dropbox.com/u/9017966/OpenBSDDevelopementandVimProgrammingGuide.zip Hi, What's the link to your .vimrc? cheers, david
Mutui cambializzati
Mutuo Ipotecario cambializzato anche in seconda ipoteca ( finalit`) Mutuo anche per segnalati in banche dati Acquisto casa Per acquistare la 1* o la 2* casa con un mutuo estremamente vantaggioso. Ristrutturazione Per ristrutturare casa con un mutuo fino all'80% del valore dell'immobile. Completamento costruzione Per completare la costruzione di una casa gi` accatastata. Liquidit` Per ottenere liquidit` da utilizzare per qualsiasi finalit`. Sostituzione + Liquidit` Per sostituire il tuo mutuo e richiedere liquidit` aggiuntiva. Anche per segnalati in banche dati
khadija
Je sais que cette proposition pourrait jtre une surprise pour vous, mais
comme une situation d'urgence ` notre condition avec mes fils ici ` Dakar
au Sinigal. Soyez binis par Allah que vous m'aider ma famille et moi de
transfirer et d'investir notre argent dans votre pays. Je suis Khadija
Yhombi de la Ripublique dimocratique du Congo (RD Congo) maintenant
rifugii au Royaume-Uni dans le cadre du HCR des Nations Unies (Haut
Commissariat pour les rifugiis). J'ai obtenu votre contact au cours d'une
recherche disespirie ici ` la Chambre internationale de commerce pour une
opiration d'investissement possible. Mon (difunt) mari l'honorable Dr
Kyelu Yhombi qui itait l'ancien ministre de l'iconomie des finances en RD
Congo a iti assassini par les rebelles dans la capitale en 2008. Et
toutes nos propriitis ont iti totalement ditruites. Toutefois, nous avons
riussi ` s'ichapper avec quelques-uns des documents de mon mari qui
couvre un montant de 5 millions de dollars (cinq millions de dollars) qui
est actuellement diposi en toute sicuriti dans un titre mondial ici `
Londres. Cest pourquoi je suis ici. La Global Security ` approuvi de
joindre le HCR des Nations Unies pour m'aider dans la question, mais je
cherche une personne de confiance au Maroc ou en Algirie qui va m'aider
mes enfants et moi pour transfirer et investir les fonds dans son pays
parce que cest un pays pacifique. Donc, mes enfants se diplacent `
partir de Dakar au Sinigal, oy ils sont pris comme rifugiis au compte du
HCR. Je suis prjt ` vous offrir 20% sur la somme totale pour votre aide.
S'il vous plant pour votre bonne information, cette transaction est 100%
s{r et en aucune fagon liis ` l'opiration illigale. QuAllah le
TOUT-PUISSANT vous binisse pour toute aide. S'il vous plant si vous etes
intiresser veuillez bien vouloir me contacter via mon e-mail
(madam_khad...@inmail24.com) ou appelez-moi ` ce numiro (00447031895054)
pour plus de ditails. Je veux en savoir plus sur vous Votre nom
... Votre ville actuelle... Votre profession
... ... ... ... .. Votre numiro de tiliphone ... ... ... ... Votre
bge ... Cordialement Khadija Yhombi
Seminario Taller Determinación de Necesidades de Capacitación 29 de Octubre México DF
Congress Marketing Presenta Seminario: Determinacisn de Necesidades de Capacitacisn Introduccisn: Congress marketing lo invita a participar en este exclusivo seminario en el cual el asistente actualizara su ticnicas y estrategias para una efectiva deteccisn de necesidades de capacitacisn, Como ya lo sabemos los recursos humanos son el activo mas importante y la base cierta de la ventaja competitiva en un plan de desarrollo estratigico, esto significa que dma a dma habra mayor inversisn en la capacitacisn, retencisn y sustitucisn del personal que conforma una organizacisn. Los cambios se producen cada vez en menor espacio de tiempo y la adaptacisn de la empresa a los mismos exige un compromiso especial de su recurso humano. La identificacisn del ser humano con la empresa es la znica base que hara posible el cambio permanente para evitar el avance de la competencia, incluso despuis de un programa de orientacisn, en pocas ocasiones los nuevos empleados estan en condiciones de desempeqarse satisfactoriamente. Objetivo: Proporcionarle al participante la metodologma necesaria que le permita establecer los Instrumentos adecuados para que en base a los resultados de la Deteccisn de necesidades, Le permita conformar un programa de capacitacisn congruente a las necesidades reales de Su organizacisn. Dirigido a: Personal del area de Recursos Humanos, area de Capacitacisn y personal orientado al desarrollo del recurso humano de la empresa Mayores informes, comunmquese a nuestros telifonos 01 33 1201-6898 y 33 15621784 y un ejecutivo de Congress marketing lo atendera o bien responda este correo con los siguientes datos y en breve nos pondremos en contacto con usted Empresa: Nombre: Telifono: Email: Nzmero de Interesados: Y en breve le haremos llegar la informacisn completa del evento. O bien comunmquense a nuestros telifonos un ejecutivo con gusto le atendera Tels. (33) 12016898, (33)15621784. Copyright (C) 2010, Congress Marketing Online S.C. Derechos Reservados. ADVERTENCIA Congress Marketing no cuenta con alianzas estratigicas de ningzn tipo dentro de la Republica Mexicana. NO SE DEJE ENGAQAR - DIGA NO A LA PIRATERIA. Todos los logotipos, marcas comerciales e imagenes son propiedad de sus respectivas corporaciones y se utilizan con fines informativos solamente. Este Mensaje ha sido enviado a misc@openbsd.org como usuario de Congress Marketing o bien un usuario le refiris para recibir este boletmn. Si usted ha recibido este mensaje por error, haga caso omiso de el y reporte su cuenta respondiendo este correo con el subject BAJACAPACITACION. Unsubscribe to this mailing list, reply a blank message with the subject UNSUBSCRIBE BAJACAPACITACION Tenga en cuenta que la gestisn de nuestras bases de datos es de suma importancia y no es intencisn de la empresa la inconformidad del receptor.
Re: Is there a method to boot from floopy after booting from CD?
In gmane.os.openbsd.misc, you wrote: Hello, My name is Topaz. Nice to meet everybady. Even though I met a trouble in front of instalation.I tried 3 CDs cd47.iso , cdemu47.iso And install47.iso.But all of them show the same result.First I can boot every instalation CD.And then The display shows boot . After that, many characters appear.Unless instalation won't continue after the messages below appears. isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 I would suggest trying a -current snapshot, it's quite possible that your machine is supported better there. (Or wait for 4.8 release). There were many changes in ACPI since 4.7 which may very well have fixed things for this vaio. My laptop can be booted by ONLY IEEE1394 connected DVD drive.So I guess the drive isn't supported by OpenBSD.That's why istallation won't continue from the middle. This doesn't matter, by the time the kernel has loaded you don't need the CD any more (providing you have a usable network interface over which you can download the installation files).
Re: Mobile VPN
And WebOS phones too: http://www.webos-internals.org/wiki/OpenVPN_for_Palm_Pre -Nick On Oct 5, 2010 3:40 AM, David Coppa lt;dco...@gmail.comgt; wrote: On Tue, Oct 5, 2010 at 9:25 AM, Jussi Peltola lt;pe...@pelzi.netgt; wrote: gt; The n900 most certainly can run openvpn. Android phones can too: http://code.google.com/p/android-openvpn-settings/ ciao, david
-current openssl seems broken
Hi, Since the openssl update (I run the latest amd64 snapshot from 10/04/2010), things like openssh are broken. $ ssh blurp.domain.loc ssh:/usr/lib/libcrypto.so.19.0: undefined symbol 'sha256_block_data_order' lazy binding failed! zsh: segmentation fault (core dumped) ssh blurp.domain.loc -- cb
Re: Router components
Hear, hear. I just built out one of these for my home firewall and the installation is bog simple. -Original Message- From: owner-m...@openbsd.org [mailto:owner-m...@openbsd.org] On Behalf Of Sean Kamath Sent: Monday, October 04, 2010 1:28 AM To: David Higgs Cc: misc@openbsd.org Subject: Re: Router components On Oct 3, 2010, at 11:15 PM, David Higgs wrote: NONE OF IT WILL MATTER TO YOU. I'll google up some smaller systems (Soekris, ALIX, etc?) and see how they strike me. Pointers here are even more welcome, as I am not as familiar with this end of the spectrum and want to avoid the aforementioned crappy super-low-power systems. Thanks for the input. I just bought a Alix 2d13 board. Then ended up buying about 7 of them for work for OOB back-channel machines. Insanely straightforward, and they Just Work(tm). Sean
Can't kill a state with pfctl?
Hello misc, I'm really coming around to using Openbsd and PF for my firewalls, it has been a great experience so far, however I am having trouble with the pfctl command in regards to killing an active state. I've tried my best to follow the man pages and seem to be doing just what it says, but it just isn't working. I have an OpenBSD box routing between two LAN segments, 192.168.10.0/24 and 192.168.0.0/24. I add a rule to my pf.conf to block traffic from the 192.168.10.0/24 net to a specific host, 192.168.0.23, port 80. Works fine, All new connection attempts are blocked as expected. However if there is an existing established connection, it continues to function. So I try to kill the existing state with pfctl, but no luck. First I tried it by specific ID: # pfctl -s state -vv | grep 192.168.0.23 -A 3 all tcp 192.168.0.23:80 - 192.168.10.111:1230 ESTABLISHED:ESTABLISHED [2511621728 + 59935] [791437282 + 6432] age 05:18:15, expires in 24:00:00, 203727:267131 pkts, 8886145:242055534 bytes id: 4ca1ac7500441b35 creatorid: a11bb4a9 all tcp 192.168.10.111:1230 - 192.168.0.23:80 ESTABLISHED:ESTABLISHED [791437282 + 6432] [2511621728 + 59935] age 05:18:15, expires in 24:00:00, 203727:267131 pkts, 8886145:242055534 bytes id: 4ca1ac7500441b36 creatorid: a11bb4a9 # pfctl -k id -k 4ca1ac7500441b35 killed 0 states Trying without the -k id produces killed 0 states from 1 source and 0 destinations Trying to kill all connections from the host (pfctl -k 192.168.0.23) does the same. I'm pulling this straight from pfctl man pages, but can't seem to get it working. I know I'm probably messing something silly, but am blind to see what it is! As always, thanks for the help in advance. I love this group, everyone has been very helpful as I make my journey into OpenBSD.
Re: -current openssl seems broken
On Tue, Oct 5, 2010 at 8:56 PM, Cedric Brisseau cbriss...@gmail.com wrote: Since the openssl update (I run the latest amd64 snapshot from 10/04/2010), things like openssh are broken. I tried a fresh install with the latest snapshot and all is ok (my bad). But a make build with latest sources fails at: === kerberosV/usr.sbin/kadmin yacc -d /usr/src/kerberosV/usr.sbin/kadmin/../../src/lib/sl/slc-gram.y lex /usr/src/kerberosV/usr.sbin/kadmin/../../src/lib/sl/slc-lex.l cc -O2 -pipe -DHAVE_CONFIG_H -DBINDIR=\/usr/bin\ -DSBINDIR=\/usr/sbin\ -DLI BEXECDIR=\/usr/libexec\ -DSYSCONFDIR=\/etc/kerberosV\ -I/usr/include/kerber osV -I/usr/src/kerberosV/usr.sbin/kadmin/../../include -I/usr/src/kerberosV/usr .sbin/kadmin/../../src/lib/roken -I/usr/src/kerberosV/usr.sbin/kadmin/../../src/ include -I/usr/src/kerberosV/usr.sbin/kadmin/../../src/lib/sl -I/usr/src/kerbe rosV/usr.sbin/kadmin/../../src/lib/krb5 -Wall -DHAVE_DLOPEN -I/usr/src/kerberosV /usr.sbin/kadmin/../../src/lib/krb5 -I/usr/src/kerberosV/usr.sbin/kadmin/../../s rc/lib/kadm5 -I. -c -o slc-gram.o y.tab.c cc -O2 -pipe -DHAVE_CONFIG_H -DBINDIR=\/usr/bin\ -DSBINDIR=\/usr/sbin\ -DLI BEXECDIR=\/usr/libexec\ -DSYSCONFDIR=\/etc/kerberosV\ -I/usr/include/kerber osV -I/usr/src/kerberosV/usr.sbin/kadmin/../../include -I/usr/src/kerberosV/usr .sbin/kadmin/../../src/lib/roken -I/usr/src/kerberosV/usr.sbin/kadmin/../../src/ include -I/usr/src/kerberosV/usr.sbin/kadmin/../../src/lib/sl -I/usr/src/kerbe rosV/usr.sbin/kadmin/../../src/lib/krb5 -Wall -DHAVE_DLOPEN -I/usr/src/kerberosV /usr.sbin/kadmin/../../src/lib/krb5 -I/usr/src/kerberosV/usr.sbin/kadmin/../../s rc/lib/kadm5 -I. -c -o slc-lex.o lex.yy.c /usr/src/kerberosV/usr.sbin/kadmin/../../src/lib/sl/slc-gram.y: In function 'mai n': /usr/src/kerberosV/usr.sbin/kadmin/../../src/lib/sl/slc-gram.y:712: warning: imp licit declaration of function 'yyparse' rm -f lex.yy.c rm -f y.tab.c cc -o slc slc-gram.o slc-lex.o /usr/src/kerberosV/usr.sbin/kadmin/../../openbsd- vers/print_version.c -lkrb5 -lcrypto /usr//lib/libcrypto.so.19.0: undefined reference to `sha512_block_data_order' /usr//lib/libcrypto.so.19.0: undefined reference to `sha256_block_data_order' collect2: ld returned 1 exit status *** Error code 1 Stop in /usr/src/kerberosV/usr.sbin/kadmin: Exit status 1 (slc, line 37 of /usr/src/kerberosV/usr.sbin/kadmin/Makefile) Stop in /usr/src/kerberosV/usr.sbin: Exit status 2 (depend, line 48 of /usr/share/mk/bsd.subdir.mk) Stop in /usr/src/kerberosV: Exit status 2 (depend, line 48 of /usr/share/mk/bsd.subdir.mk) Stop in /usr/src: Exit status 2 (depend, line 48 of /usr/share/mk/bsd.subdir.mk) *** Error code 2 *** Error code 2 *** Error code 2 *** Error code 2 Stop in /usr/src: Exit status 2 (build, line 74 of Makefile) -- cb
Re: -current openssl seems broken
On Tue, Oct 5, 2010 at 8:56 PM, Cedric Brisseau cbriss...@gmail.com wrote: Since the openssl update (I run the latest amd64 snapshot from 10/04/2010), things like openssh are broken. I tried a fresh install with the latest snapshot and all is ok (my bad). But a make build with latest sources fails at: === kerberosV/usr.sbin/kadmin yacc -d /usr/src/kerberosV/usr.sbin/kadmin/../../src/lib/sl/slc-gram.y lex /usr/src/kerberosV/usr.sbin/kadmin/../../src/lib/sl/slc-lex.l cc -O2 -pipe -DHAVE_CONFIG_H -DBINDIR=\/usr/bin\ -DSBINDIR=\/usr/sbin\ -DLI BEXECDIR=\/usr/libexec\ -DSYSCONFDIR=\/etc/kerberosV\ -I/usr/include/kerber osV -I/usr/src/kerberosV/usr.sbin/kadmin/../../include -I/usr/src/kerberosV/usr .sbin/kadmin/../../src/lib/roken -I/usr/src/kerberosV/usr.sbin/kadmin/../../src/ include -I/usr/src/kerberosV/usr.sbin/kadmin/../../src/lib/sl -I/usr/src/kerbe rosV/usr.sbin/kadmin/../../src/lib/krb5 -Wall -DHAVE_DLOPEN -I/usr/src/kerberosV /usr.sbin/kadmin/../../src/lib/krb5 -I/usr/src/kerberosV/usr.sbin/kadmin/../../s rc/lib/kadm5 -I. -c -o slc-gram.o y.tab.c cc -O2 -pipe -DHAVE_CONFIG_H -DBINDIR=\/usr/bin\ -DSBINDIR=\/usr/sbin\ -DLI BEXECDIR=\/usr/libexec\ -DSYSCONFDIR=\/etc/kerberosV\ -I/usr/include/kerber osV -I/usr/src/kerberosV/usr.sbin/kadmin/../../include -I/usr/src/kerberosV/usr .sbin/kadmin/../../src/lib/roken -I/usr/src/kerberosV/usr.sbin/kadmin/../../src/ include -I/usr/src/kerberosV/usr.sbin/kadmin/../../src/lib/sl -I/usr/src/kerbe rosV/usr.sbin/kadmin/../../src/lib/krb5 -Wall -DHAVE_DLOPEN -I/usr/src/kerberosV /usr.sbin/kadmin/../../src/lib/krb5 -I/usr/src/kerberosV/usr.sbin/kadmin/../../s rc/lib/kadm5 -I. -c -o slc-lex.o lex.yy.c /usr/src/kerberosV/usr.sbin/kadmin/../../src/lib/sl/slc-gram.y: In function 'mai n': /usr/src/kerberosV/usr.sbin/kadmin/../../src/lib/sl/slc-gram.y:712: warning: imp licit declaration of function 'yyparse' rm -f lex.yy.c rm -f y.tab.c cc -o slc slc-gram.o slc-lex.o /usr/src/kerberosV/usr.sbin/kadmin/../../openbsd- vers/print_version.c -lkrb5 -lcrypto /usr//lib/libcrypto.so.19.0: undefined reference to `sha512_block_data_order' /usr//lib/libcrypto.so.19.0: undefined reference to `sha256_block_data_order' collect2: ld returned 1 exit status *** Error code 1 Stop in /usr/src/kerberosV/usr.sbin/kadmin: Exit status 1 (slc, line 37 of /usr/src/kerberosV/usr.sbin/kadmin/Makefile) Stop in /usr/src/kerberosV/usr.sbin: Exit status 2 (depend, line 48 of /usr/share/mk/bsd.subdir.mk) Stop in /usr/src/kerberosV: Exit status 2 (depend, line 48 of /usr/share/mk/bsd.subdir.mk) Stop in /usr/src: Exit status 2 (depend, line 48 of /usr/share/mk/bsd.subdir.mk) *** Error code 2 *** Error code 2 *** Error code 2 *** Error code 2 Stop in /usr/src: Exit status 2 (build, line 74 of Makefile) You are building the source tree incorrectly.
LACP Over Wireless Bridge
Hi all :) I have the following scenario: +--+ |Lan Switch| +--+ | +-+ |OpenBSD Bridge + trunk (LACP)| +-+ | | +--+ +--+ |Rocket M5 WiMax Bridge| |Rocket M5 WiMax Bridge| +--+ +--+ ^ ^ ^ ^ ^ ^ +--+ +--+ |Rocket M5 WiMax Bridge| |Rocket M5 WiMax Bridge| +--+ +--+ | | +- -+ |3Com Swich 5500/4200 (LACP)| +---+ | +--+ |Lan Switch| +--+ There's two WiMax Links to the same location, the idea is to use it for failover. In a lab setup, OpenBSD Bridge directed connected on 3Com switch, everything works, no problem. My doubt is related with the LACP packets crossing the wireless links. I've googled, but couldn't find any definitive information about that. Any directions will be aprecciated, so: Is there a chance this messy setup can work? Has anyone configured some setup like that in Bridge mode (not ECMP)? Anyone knows if there are any wireless device that properly handle LACP packets (let then cross the wireless bridge)? Thanks in advance, Fabio Almeida
help in compile with system gcc/g++
Hello, I have a current from yesterday and I have successfully updated to new GNOME 2.32 via pkg_add -u and I am having compile problems using gcc/g++. I try to compile www.ITK.org's insight toolkit using system compiler in -current. It gives weird crashes with different filenames with messages like internal compiler error: Segmentation fault please submit a full bug report, with preprocessed source if appropriate. See URL:http://gcc.gnu.org/bugs.html for instructions I hit gmake and it proceeds further along and then crashes in some other file. I can't get to 100 % compile without this manual restart. Could somebody please help me out and tell me where I should look to resolve this issue? The problems are cropping up anywhere, where should I put a pre-processed file to output? I tried to give debug and save-temps in ccmake configuration like the GCC bugs page says to do. It generates the .i files for only some files not all of them. Looking at the screen, most of the compile problems are coming in /usr/include/g++/bits/*.h, related to STL/Templates stuff. Sometimes it gives assembler messages like this [ 79%] Building CXX object Code/IO/CMakeFiles/ITKIO.dir/itkDICOMSeriesFileNames.cxx.o [ 79%] Building CXX object Code/IO/CMakeFiles/ITKIO.dir/itkDicomImageIOFactory.cxx.o itkDicomImageIOFactory.s: Assembler messages: itkDicomImageIOFactory.s:43615: Error: junk at end of line, first unrecognized character is `8' If anybody is interested, they can download the latest ITK sources from ITK git repo and apply the patches posted today by me to make it compile http://www.itk.org/pipermail/insight-users/2010-October/038256.html Tonight I am updating to latest kernel, then leave the build on for the night for userland and Xenocara. There's not much change since yesterday but still I don't want to leave anything out. Thanks in advance for any help!
Missing nsd.conf in snaps
Running the 10/03/10 snapshot of amd64, I notice nsd.conf has been added to /etc/mtree/special but the actual /etc/nsd.conf file seems to be missing, so security(8) complains about the missing file. I just grabbed the etc48.tgz for today's snaps and found that nsd.conf is not present there, either. Is it being left out of snapshots for some reason? -- Joe Gidi j...@entropicblur.com You cannot buy skill. -- Ross Seyfried
AD1986A Data Sheet Available. Could somebody please fix the Sound Driver?
Hi, The only machine I own in my house is an old amd64 which has the following sound card. VIA VT1708/A that has AD1986A Codec It gives out sound but does not capture sound from Mic on any OS except Windows. Since my family wants to voice chat with my brother who has gone abroad for higher studies I tried contacting the Linux developers to fix the driver. http://marc.info/?l=linux-kernelm=126414072830819w=2 I was re directed to a VIA developer who told me that she does not have the Data Sheet to fix the problem :-( https://bbs.archlinux.org/viewtopic.php?pid=699431#p699431 I got the Data Sheet from http://www.analog.com/static/imported-files/data_sheets/AD1986A.pdf and Contacted the VIA developer and the Linux Kernel Developer who re-directd me there again but there was no response :-( Since I have now figured out how to use Voice Chat on OpenBSD it would be great if some body who has time look into this and fix this issue :-) Thanks --Siju The Details of my System are as follows $ dmesg OpenBSD 4.7 (GENERIC) #112: Wed Mar 17 20:43:49 MDT 2010 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC real mem = 468385792 (446MB) avail mem = 443437056 (422MB) RTC BIOS diagnostic error 36config_unit,memory_size,invalid_time mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xf0730 (54 entries) bios0: vendor American Megatrends Inc. version 080012 date 06/19/2006 bios0: ASUSTeK Computer INC. A8V-VM acpi0 at bios0: rev 0 acpi0: tables DSDT FACP APIC MCFG OEMB acpi0: wakeup devices PCI0(S4) PS2K(S4) PS2M(S4) UAR2(S4) USB1(S4) USB2(S4) USB3(S4) USB4(S4) ILAN(S4) PCI1(S4) PCI2(S4) SLPB(S4) PWRB(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: AMD Athlon(tm) 64 Processor 3500+, 2200.49 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative cpu0: AMD erratum 89 present, BIOS upgrade may be required cpu0: apic clock running at 200MHz ioapic0 at mainbus0: apid 1 pa 0xfec0, version 3, 24 pins ioapic1 at mainbus0: apid 2 pa 0xfecc, version 3, 24 pins acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (P0P1) acpiprt2 at acpi0: bus -1 (NBPG) acpiprt3 at acpi0: bus -1 (NBP0) acpiprt4 at acpi0: bus 4 (P0P7) acpiprt5 at acpi0: bus 5 (P0PA) acpicpu0 at acpi0: C3, C2 aibs0 at acpi0 acpibtn0 at acpi0: SLPB acpibtn1 at acpi0: PWRB pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 VIA K8M890 Host rev 0x00 agp at pchb0 not configured pchb1 at pci0 dev 0 function 1 VIA K8M890 Host rev 0x00 pchb2 at pci0 dev 0 function 2 VIA K8M890 Host rev 0x00 pchb3 at pci0 dev 0 function 3 VIA K8M890 Host rev 0x00 pchb4 at pci0 dev 0 function 4 VIA K8M890 Host rev 0x00 VIA K8M890 IOAPIC rev 0x00 at pci0 dev 0 function 5 not configured pchb5 at pci0 dev 0 function 6 VIA K8M890 Host rev 0x00 pchb6 at pci0 dev 0 function 7 VIA K8M890 Host rev 0x00 ppb0 at pci0 dev 1 function 0 VIA K8HTB AGP rev 0x00 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 VIA DeltaChrome Video rev 0x01 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) pciide0 at pci0 dev 15 function 0 VIA VT8251 SATA rev 0x00: DMA pciide0: using apic 1 int 21 (irq 5) for native-PCI interrupt pciide1 at pci0 dev 15 function 1 VIA VT82C571 IDE rev 0x07: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide1 channel 0 drive 0: ST340014A wd0: 16-sector PIO, LBA48, 38166MB, 78165360 sectors wd0(pciide1:0:0): using PIO mode 4, DMA mode 2 atapiscsi0 at pciide1 channel 1 drive 1 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: Optiarc, DVD RW AD-7190A, 1.02 ATAPI 5/cdrom removable cd0(pciide1:1:1): using PIO mode 4, DMA mode 2 uhci0 at pci0 dev 16 function 0 VIA VT83C572 USB rev 0x90: apic 1 int 20 (irq 11) uhci1 at pci0 dev 16 function 1 VIA VT83C572 USB rev 0x90: apic 1 int 22 (irq 4) uhci2 at pci0 dev 16 function 2 VIA VT83C572 USB rev 0x90: apic 1 int 21 (irq 5) uhci3 at pci0 dev 16 function 3 VIA VT83C572 USB rev 0x90: apic 1 int 23 (irq 5) ehci0 at pci0 dev 16 function 4 VIA VT6202 USB rev 0x90: apic 1 int 22 (irq 4) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 VIA EHCI root hub rev 2.00/1.00 addr 1 viapm0 at pci0 dev 17 function 0 VIA VT8251 ISA rev 0x00 iic0 at viapm0 spdmem0 at iic0 addr 0x51: 512MB DDR SDRAM non-parity PC3200CL3.0 pchb7 at pci0 dev 17 function 7 VIA VT8251 VLINK rev 0x00 vr0 at pci0 dev 18 function 0 VIA RhineII-2 rev 0x7c: apic 1 int 23 (irq 11), address 00:11:d8:01:23:45 rlphy0 at vr0 phy 1: RTL8201L 10/100 PHY, rev. 1 ppb1 at pci0 dev 19 function 0 VIA VT8251 PCIE rev 0x00
Re: AD1986A Data Sheet Available. Could somebody please fix the Sound Driver?
On Wed, Oct 06, 2010 at 09:16:01AM +0530, Siju George wrote:
$ mixerctl -av
outputs.dig-dac-0:1_sou=hdaudio [ hdaudio adc-0:1 ]
inputs.dac-0:1_mute=off [ off on ]
inputs.dac-0:1=248,248
inputs.dac-2:3_mute=off [ off on ]
inputs.dac-2:3=248,248
inputs.dac-4:5_mute=off [ off on ]
inputs.dac-4:5=248,248
inputs.mix_source=dac-0:1,mix3,sel8,cd,sel7 { dac-0:1 mix3 sel8 cd sel7 }
inputs.mix2_source=mix { mix }
outputs.mix3_mute=off [ off on ]
inputs.mix3_source=dac-2:3,dac-4:5 { dac-2:3 dac-4:5 }
inputs.hp_source=mix [ mix dac-2:3 dac-4:5 ]
inputs.line-grn_source=mix [ mix dac-2:3 ]
inputs.line-blu_source=dac-2:3 [ dac-2:3 mix ]
inputs.line-pnk_source=dac-4:5 [ dac-4:5 mix2 ]
inputs.sel6_source=mic [ mic line-in line-pnk line-pnk mix4 mix5 mix6 mix7 ]
outputs.sel6=255,255
inputs.sel7_source=line-in [ line-in line-blu mic ]
inputs.sel8_source=sel6 [ sel6 mix8 ]
record.adc-0:1_source=sel8 [ sel8 cd sel7 mix mix2 ]
record.adc-0:1_mute=off [ off on ]
record.adc-0:1=255,255
inputs.sel8_mute=off [ off on ]
inputs.sel8=248,248
inputs.cd_mute=off [ off on ]
inputs.cd=248,248
inputs.sel7_mute=off [ off on ]
inputs.sel7=248,248
outputs.hp_mute=off [ off on ]
outputs.hp=248,248
outputs.hp_boost=off [ off on ]
outputs.line-grn_mute=off [ off on ]
outputs.line-grn=248,248
outputs.line-grn_boost=off [ off on ]
outputs.line-grn_eapd=on [ off on ]
outputs.line-blu_mute=off [ off on ]
outputs.line-blu=248,248
outputs.line-blu_dir=output [ none output input ]
outputs.line-pnk_mute=off [ off on ]
outputs.line-pnk=248,248
outputs.line-pnk_dir=output [ none output input input-vr0 input-vr50
input-vr80 ]
outputs.mic_dir=input-vr80 [ none input input-vr0 input-vr50 input-vr80 ]
outputs.line-in_dir=input [ none input input-vr0 input-vr50 input-vr80 ]
outputs.SPDIF_source=dig-dac-0:1 [ dig-dac-0:1 ]
inputs.mix4_source=mic,line-pnk { mic line-pnk }
inputs.mix5_source=mic,line-in { mic line-in }
inputs.mix6_source=line-pnk,line-in { line-pnk line-in }
inputs.mix7_source=mic,line-pnk,line-in { mic line-pnk line-in }
inputs.mix8_source=sel6 { sel6 }
outputs.hp_sense=unplugged [ unplugged plugged ]
outputs.line-grn_sense=plugged [ unplugged plugged ]
outputs.line-blu_sense=plugged [ unplugged plugged ]
outputs.line-pnk_sense=unplugged [ unplugged plugged ]
outputs.mic_sense=unplugged [ unplugged plugged ]
outputs.line-in_sense=unplugged [ unplugged plugged ]
outputs.master=255,255
outputs.master.mute=off [ off on ]
outputs.master.slaves=dac-0:1,hp,line-grn { dac-0:1 dac-2:3 dac-4:5
mix3 sel6 sel8 cd sel7 hp line-grn line-blu line-pnk }
record.volume=255,255
record.volume.mute=off [ off on ]
record.volume.slaves=adc-0:1 { adc-0:1 }
outputs.mode=analog [ analog digital ]
$
first, 'line-pnk' is almost certainly the rear mic input, and 'mic'
is the front mic input. let's stick with the rear jacks for now.
so you want this:
outputs.line-pnk_dir=output [ none output input input-vr0 input-vr50
input-vr80 ]
to get to this:
record.adc-0:1_source=sel8 [ sel8 cd sel7 mix mix2 ]
first step, set line-pnk to be a mic input:
$ mixerctl outputs.line-pnk=input-vr80
I bet that's what kills it for other OSes. shame on the BIOS vendor for
naming it like that and shame on the board vendor for using such a silly
codec. anyway ...
now we want to see what line-pnk can feed into:
$ mixerctl -v | grep '_source=.*line-pnk'
inputs.sel6_source=mic [ mic line-in line-pnk line-pnk mix4 mix5 mix6 mix7 ]
inputs.mix4_source=mic,line-pnk { mic line-pnk }
inputs.mix6_source=line-pnk,line-in { line-pnk line-in }
inputs.mix7_source=mic,line-pnk,line-in { mic line-pnk line-in }
hmm, we're trying to get to
record.adc-0:1_source=sel8 [ sel8 cd sel7 mix mix2 ]
but none of sel6, mix4, mix6 or mix7 are choices. let's see what sel6
can feed:
$ mixerctl -v | grep '_source=.*sel6'
inputs.sel8_source=sel6 [ sel6 mix8 ]
inputs.mix8_source=sel6 { sel6 }
aha, we can have line-pnk - sel6 - sel8 - adc-0:1, and that appears
to be the shortest routing (there are others, but ignore those for now).
there's only one more thing to change:
$ mixerctl inputs.sel6_source=line-pnk
now, it's strange there are two line-pnk choices for sel6_source.
that's really a bug in azalia(4). oh well. most likely, one is the
jack itself and one is an amp. it's hard to tell, even with a
datasheet, what's really going on, as nodes can be labeled by the BIOS.
I'm guessing you don't have the code to the BIOS. you could build a
kernel with AZALIA_DEBUG defined and get a better picture.
anyway, I think that's all you should have to do to record from the rear
mic jack:
$ mixerctl outputs.line-pnk_dir=input-vr80
$ mixerctl inputs.sel6_source=line-pnk
$ mixerctl inputs.sel8_source=sel6
$ mixerctl record.adc-0:1_source=sel8
alternatively, to get around the double line-pnk choice in sel6, route
through mix4 instead:
$ mixerctl outputs.line-pnk_dir=input-vr80
$ mixerctl
FreeBSD isn't Free
Just for fun. * 4.3. Licensee shall not export, either directly or indirectly, any of this * software or system incorporating such software without first obtaining any * required license or other approval from the U. S. Department of Commerce or * any other agency or department of the United States Government. In the * event Licensee exports any such software from the United States or * re-exports any such software from a foreign destination, Licensee shall * ensure that the distribution and export/re-export of the software is in * compliance with all laws, regulations, orders, or other restrictions of the * U.S. Export Administration Regulations. Licensee agrees that neither it nor * any of its subsidiaries will export/re-export any technical data, process, * software, or service, directly or indirectly, to any country for which the * United States government or any agency thereof requires an export license, * other governmental approval, or letter of assurance, without first obtaining * such license, approval or letter. http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/contrib/dev/acpica/hardware/hwsleep.c?rev=1.2
SEMINARIO CRECIMIENTO PARA PYMES OCTUBRE 26.
[IMAGE] Mayores informes responda este correo electrsnico con los siguientes datos. Empresa: Nombre: Telifono: Email: Nzmero de Interesados: Y en breve le haremos llegar la informacisn completa del evento. O bien comunmquense a nuestros telifonos un ejecutivo con gusto le atendera Tels. (33) 8851-2365, (33)8851-2741. Copyright (C) 2010, PMS Capacitacisn Efectiva de Mixico S.C. Derechos Reservados. PMS de Mixico, El logo de PMS de Mixico son marcas registradas. ADVERTENCIA PMS de Mixico no cuenta con alianzas estratigicas de ningzn tipo dentro de la Republica Mexicana. NO SE DEJE ENGAQAR - DIGA NO A LA PIRATERIA. Todos los logotipos, marcas comerciales e imagenes son propiedad de sus respectivas corporaciones y se utilizan con fines informativos solamente. Este Mensaje ha sido enviado a misc@openbsd.org como usuario de Pms de Mixico o bien un usuario le refiris para recibir este boletmn. Como usuario de Pms de Mixico, en este acto autoriza de manera expresa que Pms de Mixico le puede contactar vma correo electrsnico u otros medios. Si usted ha recibido este mensaje por error, haga caso omiso de el y reporte su cuenta respondiendo este correo con el subject BAJAPYMES. Unsubscribe to this mailing list, reply a blank message with the subject UNSUBSCRIBE BAJAPYMESTenga en cuenta que la gestisn de nuestras bases de datos es de suma importancia y no es intencisn de la empresa la inconformidad del receptor.
