We run a bunch of R320s with intel ix(4) 10GE cards.
Work fine.
The onboard raid is mfi or something IIRC, but it works also.
2013/10/11 Friedrich Locke friedrich.lo...@gmail.com
Is anyone running OBSD 5.3 on Dell R*** series servers ?
What about 10G etherner devices ? And Storage ?
Is
I have no problem on multiple couples of R320, except the BCM5720 which
cause my OpenBSD to freeze. Waiting for 5.4 improvements :)
--
Best regards,
Loïc BLOT,
UNIX systems, security and network engineer
http://www.unix-experience.fr
Le jeudi 10 octobre 2013 Ã 20:54 -0700, Chris Cappuccio a
On 10/11/13 01:28, Jonathan Gray wrote:
On Thu, Oct 10, 2013 at 05:48:43PM -0400, RD Thrush wrote:
I noticed some anomalies in the dmesg on this new system.
1. error: [drm:pid0:i915_write32] *ERROR* Unknown unclaimed register before
writing to 10
That should be harmless, and will go
On 10/11/13 01:05, Jonathan Gray wrote:
On Thu, Oct 10, 2013 at 05:48:43PM -0400, RD Thrush wrote:
I noticed some anomalies in the dmesg on this new system.
1. error: [drm:pid0:i915_write32] *ERROR* Unknown unclaimed register before
writing to 10
2. dhclient doesn't work with the
Jonathan Gray [j...@jsg.id.au] wrote:
There is only very basic shadowfb support for ivy bridge graphics
in 5.3. To use opengl/xv and co you need to be using 5.4 or -current.
SNA will not yet work, do not use it.
I'm starting to think my problem with shm not working has to do
with my
On Fri, Oct 11, 2013 at 02:39:30AM -0400, RD Thrush wrote:
On 10/11/13 01:05, Jonathan Gray wrote:
On Thu, Oct 10, 2013 at 05:48:43PM -0400, RD Thrush wrote:
I noticed some anomalies in the dmesg on this new system.
1. error: [drm:pid0:i915_write32] *ERROR* Unknown unclaimed register
On Fri, Oct 11, 2013 at 08:44:36AM +0600, ??? wrote:
2013/10/10 Philip Guenther guent...@gmail.com:
On Thu, Oct 10, 2013 at 4:30 AM, ??? chipits...@gmail.com wrote:
I use ntp already.
So everyone can predict what your machine would have sent in response
to an ICMP
Hello Openbsd mailing list
I like very much the implementation of VRF in openbsd. It works great with
ipv4. It seems buggy with ipv6.
cat /etc/hostname.vlan425
rdomain 30 172.18.25.1/24 vlan 425 vlandev xl0
inet6 2001::2/64
IPV6 address is configured but routing is broken. [ since it seems we
I have couple of R620 in production
with ix(4) as 10G NICs. You might want to disable cores you don't need and HTT
(I'v done it half way).
No problems so far.
Below is an old dmesg with HTT disabled (else it shows up 16 cores).
OpenBSD 5.3 (GENERIC.MP) #55: Fri Mar 1 09:13:04 MST 2013
It doesn't work at all.
I am working on it, have some things working (but not enough to commit
and enable everything).
On 2013 Oct 11 (Fri) at 09:54:51 +0200 (+0200), Olivier PELERIN wrote:
:Hello Openbsd mailing list
:
:I like very much the implementation of VRF in openbsd. It works great
On 2013-10-10, Bryan Chapman br...@honeypoocakes.net wrote:
The only thing I see in /var/log/messages was on the end of the dmesg I
posted:
Oct 10 03:28:21 mystic /bsd: drm: initializing kernel modesetting
(PITCAIRN 0x1002:0x6819 0x174B:0xE221).
Oct 10 03:28:21 mystic /bsd: radeondrm0:
Hi, A question for Henning I think?
Do you know if your new super duper HENQ queuing subsystem would allow this?
I.e. to queue on the underlying physical (or trunk) interface which all
the VLAN interfaces sit upon?
This would be amazing as this would mean that you could finally share
your
On Fri, Oct 11, 2013 at 09:32:13AM +, Stuart Henderson wrote:
On 2013-10-10, Bryan Chapman br...@honeypoocakes.net wrote:
The only thing I see in /var/log/messages was on the end of the dmesg I
posted:
Oct 10 03:28:21 mystic /bsd: drm: initializing kernel modesetting
(PITCAIRN
Thanks Peter,
Good to know. Do we have a timeframe?
Regards
Olivier
Date: Fri, 11 Oct 2013 10:44:39 +0200
From: phess...@openbsd.org
To: olivier_pele...@hotmail.com
CC: misc@openbsd.org
Subject: Re: Routedomains are not working with ipv6
It doesn't work at all.
I am working on it,
No timeframe as of yet. I plan on committing some pieces of it, and when
it's ready we'll enable it.
On 2013 Oct 11 (Fri) at 12:34:41 +0200 (+0200), Olivier PELERIN wrote:
:Thanks Peter,
:
:Good to know. Do we have a timeframe?
:
:Regards
:
:Olivier
:
:
: Date: Fri, 11 Oct 2013 10:44:39 +0200
:
2013/10/11 Claudio Jeker cje...@diehard.n-r-g.com:
On Fri, Oct 11, 2013 at 08:44:36AM +0600, ??? wrote:
2013/10/10 Philip Guenther guent...@gmail.com:
On Thu, Oct 10, 2013 at 4:30 AM, ??? chipits...@gmail.com wrote:
I use ntp already.
So everyone can predict what your
On 10/11/13 03:18, Jonathan Gray wrote:
On Fri, Oct 11, 2013 at 02:39:30AM -0400, RD Thrush wrote:
On 10/11/13 01:05, Jonathan Gray wrote:
On Thu, Oct 10, 2013 at 05:48:43PM -0400, RD Thrush wrote:
I noticed some anomalies in the dmesg on this new system.
1. error: [drm:pid0:i915_write32]
Hi all,
I've been using dump for backup a bunch of systems and I've
noticed that there are some areas it can't access:
DUMP: Can't fts_read /var/audit: Permission denied
DUMP: Can't fts_read /var/authpf: Permission denied
DUMP: Can't fts_read /var/backups: Permission denied
DUMP: Can't
On Fri, Oct 11, 2013 at 01:59:33PM +0100, Rodolfo Gouveia wrote:
Hi all,
I've been using dump for backup a bunch of systems and I've
noticed that there are some areas it can't access:
DUMP: Can't fts_read /var/audit: Permission denied
DUMP: Can't fts_read /var/authpf: Permission denied
chipits...@gmail.com wrote:
actually, I'm not going to block icmp at all, I was curious why
net.inet.icmp.tstamprepl=1 by default.
So you can run timed, of course.
As others have said, the time is not a secret.
--
Christian naddy Weisgerber na...@mips.inka.de
On Fri, Oct 11, 2013 at 09:04:16AM -0400, Jiri B wrote:
Try `su' to your user on that system and try to `ls -lR' those dirs,
I suppose he won't be able to do that.
j.
Thanks Jiri.
Indeed he can't.
I've looked at this closer and I found out that on some machines dump
doesn't give any error
On Fri, Oct 11, 2013 at 02:38:23PM +0100, Rodolfo Gouveia wrote:
On Fri, Oct 11, 2013 at 09:04:16AM -0400, Jiri B wrote:
Try `su' to your user on that system and try to `ls -lR' those dirs,
I suppose he won't be able to do that.
j.
Thanks Jiri.
Indeed he can't.
I've looked at
Rodolfo Gouveia wrote:
On Fri, Oct 11, 2013 at 09:04:16AM -0400, Jiri B wrote:
Try `su' to your user on that system and try to `ls -lR' those dirs,
I suppose he won't be able to do that.
j.
Thanks Jiri.
Indeed he can't.
I've looked at this closer and I found out that on some machines
On Fri, Oct 11, 2013 at 04:56:35PM +0200, Remco wrote:
Possibly, yes, but I don't think you're supplying all information necessary
to
determine that. The exact command you run isn't clear to me.
Here it is, on the machine without errors:
$ id
uid=1001(backup) gid=1001(backup)
Hi guys,
I am looking for some suggestions for a good, small quite laptop. I was
looking at futureshop.ca and bestbuy.ca. I currently have an HP dv3
For OpenBSD, I would never buy something at FutureShop or BestBuy; those
are all consumer-oriented Designed For Windows 8 laptops.
I either
On 10/10/13 17:48, RD Thrush wrote:
I noticed some anomalies in the dmesg on this new system.
1. error: [drm:pid0:i915_write32] *ERROR* Unknown unclaimed register before
writing to 10
2. dhclient doesn't work with the onboard nic (possibly since the lladdr is
0:0:0:0:0:0.
3. (1)
On 10/11/2013 06:10 PM, Adam Thompson wrote:
Hi guys,
I am looking for some suggestions for a good, small quite laptop. I was
looking at futureshop.ca and bestbuy.ca. I currently have an HP dv3
For OpenBSD, I would never buy something at FutureShop or BestBuy; those
are all
On Fri, Oct 11, 2013 at 04:56:36PM +0100, Rodolfo Gouveia wrote:
On Fri, Oct 11, 2013 at 04:56:35PM +0200, Remco wrote:
Possibly, yes, but I don't think you're supplying all information necessary
to
determine that. The exact command you run isn't clear to me.
Here it is, on the machine
Hi. Would it be possible to get SSL on the OpenBSD website(s)?
It would be just a couple lines to change in nginx.conf/httpd.conf.
SSL certificates are free from Startcom and cheap from other vendors.
It would be really nice to have, even if it's not the default. I feel naked
viewing the site over
John Darrah writes:
Hi. Would it be possible to get SSL on the OpenBSD website(s)?
It would be just a couple lines to change in nginx.conf/httpd.conf.
SSL certificates are free from Startcom and cheap from other vendors.
It would be really nice to have, even if it's not the default. I feel
30 matches
Mail list logo
