Re: opensmtpd / ldap unreliable

On Tue, 22 May 2018 18:13:23 -0700 "Paul B. Henson" wrote: > If the ldap server isn't available when opensmtpd is started, it says > it started: > > # /etc/rc.d/smtpd start Then apparently you should have done # /etc/rc.d/ldapd start or preferably # rcctl start ldapd first.

opensmtpd / ldap unreliable

So I recently converted my opensmtpd server to use ldap as the backend for user authentication. It seems it's a bit untolerant to ldap issues? If the ldap server isn't available when opensmtpd is started, it says it started: # /etc/rc.d/smtpd start smtpd(ok) But it isn't there: # ps -aux |

Re: Intranet routing with dynamic IPs

Regardless of which routing protocol I use, I run into the same problem. I can't find a way to configure this on OpenBSD. Is this such an exotic set-up? On 2018-05-21 22:23, Raul Miller wrote: I would try OpenOSPFD for this situation, instead of OpenBGPD.

vlan without IP address not working (parent not in promisc mode)

Hi misc@, I'm trying to bridge a VLAN between two routers with a vxlan(4) interface. Setup: router 1 (6.3): physical interface (em) - vlan (with IP address) - bridge - vxlan The two routers are connected directly, the traffic is encrypted with IPSec and encapsulated in etherip(4), routed

Re: socket permissions inside /var/www chroot

On Tue, 22 May 2018 06:04:57 +0300 IL Ka wrote: > I am definitely not an expert in this field, but here are some > thoughts: Exactly. There is always more than one way to skin a cat. I'm not looking for a perfectly spelled out "solution" I must follow to the letter. >

Re: N7260 wifi card bug (hardware or driver?)

Well, this problem just magically went away, and all I did was complain about it here and run syspatch and fw_update regularly. Are there any chances that someone fixed it? Or should I attribute this problem and its solution to something else other than OpenBSD? I looked at the changelog from

Re: ikev2 All incoming/outgoing traffic over IPsec?

Not sure I quite understand this setup. Why redirect over port 9222 on the client—can’t you just do “pass in … rdr-to 192.168.6.1 port ssh” on the server? That said, I do believe you’ll need NAT on the server, because it’s now masquerading its own 192.168.5.0/24 network as well as the

Re: sndio multiple interfaces

On Tue, May 22, 2018 at 07:56:31AM +0200, Alexandre Ratchov wrote: > On Sun, May 20, 2018 at 06:49:25PM -0400, Ken M wrote: > > Been looking around and can't find the answer to this question. If I missed > > it > > in some obvious place please excuse me. > > > > Anyway I am curious if sndio can

Re: ping blocked for 12 minutes

On 2018-05-20, Patrick Dohman wrote: > It appears there is an errata effecting Avoton and Rangeley products. > > AVR54: > > “System May Experience Inability to Boot or May Cease Operation Problem: > The SoC LPC_CLKOUT0 and/or LPC_CLKOUT1 signals (Low Pin Count bus clock

Re: Building OpenBSD and ports VS installing from packages

On 2018-05-21, Peter Hessler wrote: > i386 and amd64 are different platforms, so of course you get different > packages. > > Within the same platform, all binaries that are built should run on all > possible members of that platform. > > So, code will be compiled WITHOUT AVX

Re: 6.3 just died (not for the first time)

Hi Peter, please check the threads on the b...@openbsd.org mailing list. The patch posted by Martin Pieuchot seemst to help. Its running on my hosts for 5 days without any hiccup. Hope this helps Harri

Re: HPPA 720/60 and PS/2 Keyboard

On Mon, 21 May 2018, Otto Moerbeek wrote: > On Mon, May 21, 2018 at 12:29:13PM +0200, Markus Hennecke wrote: > > > I tried updating my HPPA box from 6.2 to 6.3, but when booting the release > > or -current bsd.rd kernel the keyboard repeats the last key pressed. The > > 6.2 release did not

Re: Viewport for man.openbsd.org -- readability on phones

On Tue, May 22, 2018 at 06:35:17AM +0300, li...@wrant.com wrote: > For younger UNIX users, the real reason is technical limits of hardware then. > > https://en.wikipedia.org/wiki/Punched_card#IBM_80-column_punched_card_format_and_character_codes >