Hello,
I recently installed OpenBSD 6.4 on a Dell Latitude 6430u and am trying to get
touchpad two-finger scrolling working in X11. As far as I can tell the touchpad
is being loaded via wsmouse but I'm not sure how or where to properly configure
the WSMOUSECFG_TWOFINGERSCROLL found in
Normen Wohner wrote:
> > On Mar 30, 2019, at 20:21, Maurice McCarthy wrote:
> >
> > Forgive me if I'm being silly but just because the kernel recognizes
> > the SD card it does not follow that the software to read it is built
> > into _base_. I hardly ever use an SD card but from what I
> On Mar 30, 2019, at 18:39, "tfrohw...@fastmail.com"
> wrote:
>
> That makes sense - I missed the part in your initial email about it being the
> keydisk. Unfortunately I'm not familiar with how bootloader/bioctl access a
> keydisk. Does the SD card reader work otherwise?
>
> It's a
> On Mar 30, 2019, at 20:21, Maurice McCarthy wrote:
>
> Forgive me if I'm being silly but just because the kernel recognizes
> the SD card it does not follow that the software to read it is built
> into _base_. I hardly ever use an SD card but from what I remember you
> have install
Hi.
I've got me a RockPro64 and the RockPro64 PCI-E To Dual SATA-II Interface
Card [0] and followed jaspers@'s instructions [1] on how to install OpenBSD.
Is the mentioned PCI-E To Dual SATA-II Interface Card or PCI-E on the
RockPro64 supposed to work? When I boot OpenBSD, I see the following in
El sáb., 30 mar. 2019 a las 20:40, Flipchan () escribió:
>
> Reyk if your reading this reverseproxy is a feature request for httpd.
>
Have you tried relayd(8)?
Regards!
>
> Just set up a bunch off ur django stuff and have relayd redirect to the hosts
> in a way you seem fit, like create a
Thanks so much Flipchan. I'll give it a go. Feel free to send on any config
examples relating to the fastcgi reverse proxy. All help much appreciated!
On Sat, 30 Mar 2019 at 19:34, Flipchan wrote:
> Reyk if your reading this reverseproxy is a feature request for httpd.
>
>
> Just set up a bunch
Reyk if your reading this reverseproxy is a feature request for httpd.
Just set up a bunch off ur django stuff and have relayd redirect to the hosts
in a way you seem fit, like create a relay for http in the conf and write a
table with the host n ports and forward it to the table, check out
Forgive me if I'm being silly but just because the kernel recognizes
the SD card it does not follow that the software to read it is built
into _base_. I hardly ever use an SD card but from what I remember you
have install pcsc-tools from ports to use one. If this is so then you
will _never_ be
On March 30, 2019 3:58:34 PM UTC, Normen Wohner wrote:
>No I have the Full Disk Encryption on the internal Harddrive.
>Keydisk is on an SD card.
>When I try to boot with it being in the
>internal reader it says keydrive not found.
>I can boot with the same SD inside a USB Adapter.
>That MAKEDEV
No I have the Full Disk Encryption on the internal Harddrive.
Keydisk is on an SD card.
When I try to boot with it being in the
internal reader it says keydrive not found.
I can boot with the same SD inside a USB Adapter.
That MAKEDEV solution would not be permanent,
maybe I should try to see
Sounds perfect. Any tips on how to get started with configuration and such?
On Sat, 30 Mar 2019 at 15:19, Flipchan wrote:
> You cant do a reverse proxy with httpd however you can do it ugly with a
> fastcgi reverse proxy , httpd fastcgi reverseproxy to relayd and load
> balance to mulitple
On March 29, 2019 9:42:44 PM UTC, Normen Wohner wrote:
>I cannot use my SD Reader for keydisk purposes.
>It does show up in dmesg and should be there on boot.
>Since my SD reader is bundled with a
>Sony MemoryStick reader I see them both coming up
>when I plug in the SD Card.
>The MS umass shows
You cant do a reverse proxy with httpd however you can do it ugly with a
fastcgi reverse proxy , httpd fastcgi reverseproxy to relayd and load balance
to mulitple python listeners i have it working like a charm :)
On March 30, 2019 3:22:47 PM GMT+01:00, Michael Joy
wrote:
>Apologies in
Apologies in advance for the noobish question.
Does anyone have a tutorial or example of a working configuration for a
Django app being served with httpd and relayd? Beating my head off the wall
with it at this point.
On 2019-03-29, Sebastian Benoit wrote:
> open...@kene.nu(open...@kene.nu) on 2019.03.29 08:36:26 +0100:
>> I forgot to add to my previous email. One thing that could be useful
>> in this case is to mimic the Cisco option "neighbor x.x.x.x
>> remove-private-as" which removes any private ASes from
On Sat, Mar 30, 2019 at 10:54:21AM -, Stuart Henderson wrote:
> On 2019-03-30, Leonid Bobrov wrote:
> > On Tue, Mar 26, 2019 at 10:51:35AM +0200, Leonid Bobrov wrote:
> >> Hi, dear NetBSD and OpenBSD communities.
> >>
> >> I need to work with wscons, but I don't want to guess by examples
>
On 2019-03-29, Rachel Roch wrote:
> Hi,
>
> Has anyone encountered this before ?
>
> Neighbor AS MsgRcvd MsgSent OutQ Up/Down State/PrfRcvd
> EXT-V6-R2 65515 50 40 0 00:02:55 Active
> EXT-V4-R2 65515 38 37 0 00:27:42
On Sat, Mar 30, 2019 at 1:58:19AM -0600, Theo de Raadt wrote:
> Leonid Bobrov wrote:
>
> > On Sat, Mar 30, 2019 at 01:47:53AM -0600, Theo de Raadt wrote:
> > > Leonid Bobrov wrote:
> > >
> > > > On Tue, Mar 26, 2019 at 10:51:35AM +0200, Leonid Bobrov wrote:
> > > > > Hi, dear NetBSD and OpenBSD
On 2019-03-30, Leonid Bobrov wrote:
> On Tue, Mar 26, 2019 at 10:51:35AM +0200, Leonid Bobrov wrote:
>> Hi, dear NetBSD and OpenBSD communities.
>>
>> I need to work with wscons, but I don't want to guess by examples
>> how to work with it, can you please provide documentation for its
>> API?
>
Leonid Bobrov wrote:
> On Sat, Mar 30, 2019 at 01:47:53AM -0600, Theo de Raadt wrote:
> > Leonid Bobrov wrote:
> >
> > > On Tue, Mar 26, 2019 at 10:51:35AM +0200, Leonid Bobrov wrote:
> > > > Hi, dear NetBSD and OpenBSD communities.
> > > >
> > > > I need to work with wscons, but I don't want
On Sat, Mar 30, 2019 at 01:47:53AM -0600, Theo de Raadt wrote:
> Leonid Bobrov wrote:
>
> > On Tue, Mar 26, 2019 at 10:51:35AM +0200, Leonid Bobrov wrote:
> > > Hi, dear NetBSD and OpenBSD communities.
> > >
> > > I need to work with wscons, but I don't want to guess by examples
> > > how to
Leonid Bobrov wrote:
> On Tue, Mar 26, 2019 at 10:51:35AM +0200, Leonid Bobrov wrote:
> > Hi, dear NetBSD and OpenBSD communities.
> >
> > I need to work with wscons, but I don't want to guess by examples
> > how to work with it, can you please provide documentation for its
> > API?
>
> Theo,
On Tue, Mar 26, 2019 at 10:51:35AM +0200, Leonid Bobrov wrote:
> Hi, dear NetBSD and OpenBSD communities.
>
> I need to work with wscons, but I don't want to guess by examples
> how to work with it, can you please provide documentation for its
> API?
Theo, Ulf, Anton, Todd, Martin, Frederic,
24 matches
Mail list logo
