Re: Rawtherapee 5.7 crashes in 6.6 amd64

2019-11-16 Thread Peter Varga
Yesa On Sat, Nov 16, 2019, at 19:12, Merritt Draney wrote: > I have tried to get Rawtherapee running unsuccessfully on my system. Is > anyone else having trouble? If I run it out of a terminal from a folder with > no pictures in it, it will start up fine. Then if I select a folder with >

Rawtherapee 5.7 crashes in 6.6 amd64

2019-11-16 Thread Merritt Draney
I have tried to get Rawtherapee running unsuccessfully on my system.  Is anyone else having trouble?  If I run it out of a terminal from a folder with no pictures in it, it will start up fine.  Then if I select a folder with pictures in it (with the file browser) sometimes it will start loading

Re: Home Nas -> Montreal BUG

2019-11-16 Thread Patrick Marchand
Hey, Since I'm getting off-list questions from more than one person, I'll post here as well. On 11/15, Patrick Marchand wrote: > I'll be playing around with DragonflyBSD Hammer2 (and multiple offsite > backups) for a home NAS over the next few weeks. I'll probably do a > presentation about the

Re: build error on octeon, 6.6

2019-11-16 Thread Theo de Raadt
Christian Groessler wrote: > > the src is not at /usr/src, so i'm going to dig deeper. > > > (not a native English speaking person) Did you want to say "*not* > going to dig deeper"? indeed. not going to dig deeper. problem at your end.

Re: build error on octeon, 6.6

2019-11-16 Thread Christian Groessler
On 2019-11-16 18:36, Theo de Raadt wrote: Diana Eichert wrote: Have you tried restarting make at the point it failed? I remember trying to compile ports on my Ubiquiti SG and a build failed. I can't remember who I contacted on @openbsd ports but they mentioned I should try do that and some

Re: Iked/unbound

2019-11-16 Thread Dale C.
I'm not seeing anything helpful there. I have worked out the pf problem, still have difficulty with how to pass DNS to the resolver on the responder. Dale On 11/16/19, Clay Daniels wrote: > Check out this: > > https://man.openbsd.org/iked.8 > > History > > The iked program was written by

Re: Home NAS

2019-11-16 Thread Karel Gardas
On 2019-11-15 14:34, Rafael Possamai wrote: My experience with ZFS (FreeNAS for the most part) is that it becomes more "expensive" to expand your pool after the fact (for a couple of different reasons, see below), That's probably case with more complex ZFS RAID setup, but for this particular

Re: Home NAS

2019-11-16 Thread Karel Gardas
On 2019-11-14 15:26, Jan Betlach wrote: Hi guys, I am setting up a home NAS for five users. Total amount of data stored on NAS will not exceed 5 TB. Clients are Macs and OpenBSD machines, so that SSHFS works fine from both (no need for NFS or Samba). I am much more familiar and comfortable

Re: Home NAS

2019-11-16 Thread Karel Gardas
On 2019-11-15 16:02, pierre1.bar...@orange.com wrote: Hello, I tried a home NAS with ZFS, then BTRFS. Those filesystems needs tons of RAM (~1 GB of RAM by TB of disk), preferably ECC. For NAS you prefer ECC anyway and 1 GB RAM consumption per 1 TB of drive is urban legend probably passed

Re: Iked/unbound

2019-11-16 Thread Clay Daniels
Check out this: https://man.openbsd.org/iked.8 History The iked program was written by Matthew Grooms ( mgro...@shrew.net ) as part of the Shrew Soft ( http://www.shrew.net ) family of IPsec products. On Sat, 16 Nov 2019, Dale C. wrote: Date: Sat, 16 Nov 2019 12:44:21 -0700 From: Dale C.

Iked/unbound

2019-11-16 Thread Dale C.
Hi there, I'm trying to setup iked. I have it working with the exception of DNS. I've put the responders conf files here: https://bpaste.net/raw/LH4O2 My question is, what is the right way to forward DNS to a local unbound resolver on the responder? I'm also not sure why I need the line: pass

Re: build error on octeon, 6.6

2019-11-16 Thread Theo de Raadt
Diana Eichert wrote: > Have you tried restarting make at the point it failed? > > I remember trying to compile ports on my Ubiquiti SG and a build failed. > I can't remember who I contacted on @openbsd ports but they mentioned > I should try do that and some of the ports would continue on then

Re: build error on octeon, 6.6

2019-11-16 Thread Diana Eichert
Have you tried restarting make at the point it failed? I remember trying to compile ports on my Ubiquiti SG and a build failed. I can't remember who I contacted on @openbsd ports but they mentioned I should try do that and some of the ports would continue on then fail later. I ended up buying an

Re: Home NAS

2019-11-16 Thread Jean-François Simon
Hi, I remind there was an incremental backup which I used to run in cron, doing good job of making daily, weekly and monthly backups of deltas. I could not find the name of this, it was available from packages as far as I remember and created directory trees to the dates filled in with only

Re: Home NAS

2019-11-16 Thread Predrag Punosevac
Paolo Aglialoro wrote: > A fundamental element missing from the 1st mail is on which hardware should > run your software-defined NAS and for which use. > > I exclude you are talking about several nodes, on which you can run Ceph or > GlusterFS filesystems. > "Ceph & Gluster are WILDLY

Re: heavy CPU consumption and laggy/stuttering video on thinkpad x230

2019-11-16 Thread Joe Davis
This may come across as a strange question, but is the microphone disabled in the BIOS? The azalia driver has(had?) some issues with that before. Cheers, Joe

Re: 'machine/cdefs.h' file not found when installing nokogiri gem

2019-11-16 Thread mabi
‐‐‐ Original Message ‐‐‐ On Saturday, November 16, 2019 2:38 PM, Stuart Henderson wrote: > For native extensions, it's really best to install from packages. > > pkg_add ruby25-nokogiri Thanks for the tip, I didn't think about that alternative. What puzzles me is that I managed to

Re: httpd redirect

2019-11-16 Thread Thomas
Ted, I feel so stupid nowof course this is impossible...thanks for the answer! All the best, Thomas On 16.11.19 07:39, Ted Unangst wrote: > Thomas wrote: >> Hi, >> >> I need to do this redirect with httpd: >> >> from: >> http://my.old.site/#info >> to: >>

Re: vi in ramdisk?

2019-11-16 Thread Raymond, David
Arch Linux uses nano in its boot drive. Pretty simple, gets the job done. (They also include vi.) Dave Raymond On 11/16/19, Roderick wrote: > > On Sat, 16 Nov 2019, U'll Be King of the Stars wrote: > >> I assumed that the canonical reference for ed was K, "The Unix >> Programming > >

Re: 'machine/cdefs.h' file not found when installing nokogiri gem

2019-11-16 Thread Stuart Henderson
On 2019-11-16, mabi wrote: > Hi, > > I am trying to install the nokogiri Ruby gem using "gem install nokogiri" and > have the ruby-2.5.5 package from ports for that purpose installed. > > Unfortunately it does not want to install complaining that the > 'machine/cdefs.h' header file can not be

Re: Home NAS

2019-11-16 Thread Paolo Aglialoro
A fundamental element missing from the 1st mail is on which hardware should run your software-defined NAS and for which use. I exclude you are talking about several nodes, on which you can run Ceph or GlusterFS filesystems. Is it a single full size multi-disk server planned for intensive

Re: heavy CPU consumption and laggy/stuttering video on thinkpad x230

2019-11-16 Thread Stuart Henderson
On 2019-11-16, David Trudgian wrote: > I have also set the following systcl values: > > # shared memory limits (browsers, etc.) > # max shared memory pages (*4096=8GB) > kern.shminfo.shmall=20971552 > # max shared memory segment size (2GiB) > kern.shminfo.shmmax=2147483647 >

Re: teco, and Re: vi in ramdisk?

2019-11-16 Thread Stuart Henderson
On 2019-11-15, gwes wrote: > Still not huge. I don't know what the current upper limit for > programs in the install medium is. As this is a totally irrelevant > thread, I suspect that squashing teco into the single install > executable would only raise it 250K because it uses only very > vanilla

'machine/cdefs.h' file not found when installing nokogiri gem

2019-11-16 Thread mabi
Hi, I am trying to install the nokogiri Ruby gem using "gem install nokogiri" and have the ruby-2.5.5 package from ports for that purpose installed. Unfortunately it does not want to install complaining that the 'machine/cdefs.h' header file can not be found. This header file is included on

Re: heavy CPU consumption and laggy/stuttering video on thinkpad x230

2019-11-16 Thread Michael H
*David, sorry for the repeated message. I realized that reply only went out to you alone and not the mailing list :P Here's what I have tried: setup the xorg.conf file to tell it to use the intel driver instead of modesetting #/etc/X11/xorg.conf.d/20-intel.conf Section "Device" Identifier

Re: urtwn(4) gets wedged periodically

2019-11-16 Thread Stefan Sperling
On Sat, Nov 16, 2019 at 05:24:37PM +0800, Kevin Lo wrote: > Despite our USB issues, there are minor problems with the urtwn(4) for > RTL8188C/RTL8192C: > > - we don't need to enable/disable efuse access protection; it may prevent > incorrect mac address read from efuse. > - disable BB/RF is not

Re: urtwn(4) gets wedged periodically

2019-11-16 Thread Kevin Lo
On Wed, Nov 13, 2019 at 01:41:28AM -0500, Brennan Vincent wrote: > Hello, > > I have a Wi-Fi USB adapter. urtwn(4) normally works fine, but it's a bit > flaky... > > The issue happens both on 6.6 and on -current. > > When my adapter gets into the bad state, it appears (from dmesg output) that

Re: vi in ramdisk?

2019-11-16 Thread Roderick
On Sat, 16 Nov 2019, U'll Be King of the Stars wrote: I assumed that the canonical reference for ed was K, "The Unix Programming Reference = man page. Under /usr/share/doc/usd/ in an old BSD System you may find Brian W. Kernighan ed Tutorial. Just google for it. Sam looks very interesting