Re: KVM Q35 Virtual Machines , SR-IOV PCI-E Bridges and OpenBSD jitter on attached network

2019-12-16 Thread Tom Smyth
Hello, I tried SR-IOV and intel I350 1Gb/s nic hardware being passed through to OpenBSD 6.6 amd64 the intel i350 passed through as a physical function on PCI-E is detected as an em(4) nic and these dont suffer from the same jitter as the IXL(4) or the AVF(4) drivers so i'm thinking there is

Re: ttyC0 floods with error messages

2019-12-16 Thread Luke A. Call
On 12-16 10:48, Raymond, David wrote: > I get similar stuff on console 1 but not on the others on all my > OpenBSD machines. As I use X windows and have clean consoles 2-4 > available if necessary, I just ignore it. I get similar messages in dmesg (used to be on the first console), and every

Re: Third server now locked up after reboot due to no keyboard attached

2019-12-16 Thread Andrew Daugherity
On Sun, Dec 15, 2019 at 12:28 PM Nick Holland wrote: > > Well...yeah. > If the boot loader echoed anything, it's behaving As Desired -- a char at > the command line means "STOP ALL BOOTING, I have something special I want > you to do". > > [...] > However, I think there are a few things you might

mkdir(2) set errno to EISDIR instead of EEXIST?

2019-12-16 Thread Omar Polo
Hello misc, Background: I'm running OpenBSD i386 6.6 stable: $ uname -mrsv OpenBSD 6.6 GENERIC.MP#3 i386 I've found that mkdir("/", mode) sets errno to EISDIR. Is this intended? By reading the manpage I expected mkdir(2) to fail with EEXIST. I know it's a bit silly to mkdir /,

Re: ttyC0 floods with error messages

2019-12-16 Thread Theo de Raadt
USB subsystem bugs. Whoever said it was your mouse or cable is being an inaccurate jerk. Raymond, David wrote: > I get similar stuff on console 1 but not on the others on all my > OpenBSD machines. As I use X windows and have clean consoles 2-4 > available if necessary, I just ignore it. >

Re: ttyC0 floods with error messages

2019-12-16 Thread Raymond, David
I get similar stuff on console 1 but not on the others on all my OpenBSD machines. As I use X windows and have clean consoles 2-4 available if necessary, I just ignore it. Dave Raymond On 12/16/19, putridsou...@gmail.com wrote: > The error does not seem to be a faulty mouse and I > don't use

Re: ttyC0 floods with error messages

2019-12-16 Thread putridsoul66
The error does not seem to be a faulty mouse and I don't use a KVM switch anyway so it is not the source. Following on pervious reply, I tried on a new mouse. But was greeted with the same error: wsmouse0 detached ums0 detached uhidev0 detached uhidev0 at uhub0 port 4 configuration 1 interface 0

Re: cvs checkout of src,ports and xenocara gives duplicate key msg

2019-12-16 Thread Stefan Sperling
On Mon, Dec 16, 2019 at 10:55:17AM +0530, putridsou...@gmail.com wrote: > Currently I'm running the -stable OPENBSD-6.6 > I want to set up the ports repository so > I followed the faqs to set up a /usr/ports partition, > changed the group to wsrc and file modes to 775. > Then I added my local

Re: route an IPv4 /32 to a different interface

2019-12-16 Thread Claudio Jeker
On Sun, Dec 15, 2019 at 08:57:48PM +0100, Denis Fondras wrote: > Hi, > > I have this setup : > > em3: flags=8843 mtu 1500 > lladdr > index 4 priority 0 llprio 3 > media: Ethernet autoselect (1000baseSX full-duplex) > status: active > inet6

Re: route an IPv4 /32 to a different interface

2019-12-16 Thread Denis Fondras
On Sun, Dec 15, 2019 at 08:29:42PM +, Tom Smyth wrote: > Hi Denis, > > ok ..I hadnt read your email fully sorry about that... > > what are you trying to achieve here? > > you have a 172.16.0.249/30 address on em3 which includes > 172.16.0.248-127.16.0.251 > > and then you have a