On Sun, May 31, 2020 at 8:45 PM Noth wrote:
>
> Hi,
>
>Why are you putting the zone files in /var/named/tmp? That's probably
> the source of the problem. Use /var/named/{master,slave} for those...
>
I used to I them in slave, but that failed as well.
--
chs
ipmitool is timing out on my system with the kernel driver loaded, where I
havent seen this in previous releases.
I looked at the changes in 6.7 for ipmi.c, there's a number of them (thank
you!) My intention is to bisect for which change may have caused this, but if
someone knows what’s going
Hi.
I just used the new ‘sysupgrade’ to upgrade my little Alix boxes to 6.7. It
worked very well, and thank you for this upgrade simplification tool.
I do have one question. After upgrading the first machine, when I ran syspatch
to patch the system, I got a failure saying that the user _rpki_
No, it was set to 0. I set it to 1 and that fixed the issue.
Thanks!
Also, Maurice mentioned "sndioctl -d" so here is the output:
073:input[0].level=0..255 (120)074:input[1].level=0..255
(120)105:input[0].mute=0..1 (0)106:input[1].mute=0..1
(0)009:output[0].level=0..255 (126)010:output[1].level=0..
On Sat, May 30, 2020 at 07:23:58PM +0200, Jan Stary wrote:
> This is current/amd64 on a macbook2,1 (dmesg below).
> It has two RAM slots, each holding a 2GB module:
if you like using older Apple HW then
https://everymac.com/
is a very good resource. searching Macbook2,1 reveals the HW issue.
t
On 31/05/2020 20:00, Christer Solskogen wrote:
Hi!
With current (OpenBSD 6.7-current (GENERIC.MP) #232: Sat May 30 18:17:19
MDT 2020) and up-to-date packages, I'm having a hard time running isc_named
as a slave dns.
I get this in the log:
dumping master file: tmp/tmp-lxMn2v1tJx: open: file no
After upgrade to 6.7 I had to change all of isc_named’s file statements to have
a / before their path. Fwiw, I don’t see this in the Changelog, nor does
sysmerge handle this, so I’m guessing this is some sort of new bug.
Before 6.7, this always worked:
file “master/loopw.com”
after, I have t
On Sun, May 31, 2020 at 08:19:18PM +0200, Jurjen Oskam wrote:
> Hi,
>
> For the sake of the archives and future search engine users, I'll share what
> can happen when you use sysupgrade to upgrade your OpenBSD host but then
> forget to run update your installed packages. (Yep, silly mistake, I kno
Hi,
For the sake of the archives and future search engine users, I'll share what
can happen when you use sysupgrade to upgrade your OpenBSD host but then
forget to run update your installed packages. (Yep, silly mistake, I know...)
After upgrading my Ansible host to 6.7, I noticed that each ansib
Hi!
With current (OpenBSD 6.7-current (GENERIC.MP) #232: Sat May 30 18:17:19
MDT 2020) and up-to-date packages, I'm having a hard time running isc_named
as a slave dns.
I get this in the log:
dumping master file: tmp/tmp-lxMn2v1tJx: open: file not found
named.conf is like this:
options {
Do you have sysctl kern.audio.record=1 ?
Jan
On May 30 18:17:02, aa...@iforgotmy.name wrote:
> Hello,
>
> I have an amd64 laptop with OpenBSD 6.7 and I am only getting
> zero-valued samples when recording. Is there any checklist I can
> go through to ensure nothing is muted and that I am reading
On May 31 13:24:20, h...@stare.cz wrote:
> On May 31 12:16:58, h...@stare.cz wrote:
> > Hi,
> >
> > On May 26 22:15:28, feine...@logic.at wrote:
> > > I think that my fix for video(1) posted at
> > > https://marc.info/?l=openbsd-tech&m=159048565528060&w=2 could also
> > > remedy your problem of vi
sndioctl -d
Have a look at man sndioctl
Good Luck
Hello,
I have an amd64 laptop with OpenBSD 6.7 and I am only getting
zero-valued samples when recording. Is there any checklist I can
go through to ensure nothing is muted and that I am reading from
the correct input device?
I have tried both aucat and a C program I wrote (attached).
Thanks,
Aar
On May 31 12:16:58, h...@stare.cz wrote:
> Hi,
>
> On May 26 22:15:28, feine...@logic.at wrote:
> > I think that my fix for video(1) posted at
> > https://marc.info/?l=openbsd-tech&m=159048565528060&w=2 could also
> > remedy your problem of video(1) crashing reported at
> > https://marc.info/?l=op
Hi/,/
Several links on loongson.html are now broken as zkml.lemote.com is no
longer being resolved.
I think it's a good idea to redirect them to their archived version on
archive.org.
Cheers,
Yifei Zhan
Index: loongson.html
==
hello,
valdrin.m...@zoho.com (Valdrin MUJA), 2020.05.25 (Mon) 16:47 (CEST):
> Actually I updated the /etc/ttys file and add my program instead of
> getty. However, after boot, there was still OpenBSD login prompt
> before my program started.
as already mentioned, init(8) respawns the program sp
Hi,
On May 26 22:15:28, feine...@logic.at wrote:
> I think that my fix for video(1) posted at
> https://marc.info/?l=openbsd-tech&m=159048565528060&w=2 could also
> remedy your problem of video(1) crashing reported at
> https://marc.info/?l=openbsd-misc&m=158800058009113&w=2 .
On May 30 23:52:43,
18 matches
Mail list logo
