Hi folks!
I would like to install on my notebook 3 operating systems: OpenBSD,
Linux and Windows 10.
Do you know any tutorial on how the create the partitions using GPT
before i install any of the 3 OSes ? I would like to boot via UEFI; is
there any special partition for the UEFI booting ? May th
On Thu, Sep 17, 2020 at 11:43 AM Brandon Woodford wrote:
> Hello,
>
> I've been trying to fix an issue with my Intel I350-T4 PCI Network card
> not being reported to the OpenBSD 6.7 system during boot. Looking through
> dmesg, I was not able to find any reference to the card or the em interface
Hi Brandon,
The key point here for the answer provided to iyou was "Firmware" not
"driver"
Two different things.
Driver for Linux for example is use to allow the network stack of Linux
to use the card based on what the actual card support.
Firmware is what actually run on the flash of the card
Should this really be necessary though? The card is listed under the supported
em(4) devices.
I've found the drivers on Intel's website but only for Linux specific systems.
Not really sure where to go from here...
On Thu, Sep 17, 2020, at 2:07 PM, Tom Smyth wrote:
> Try
> Getting the intel fir
> On Sep 17, 2020, at 09:48, Ingo Schwarze wrote:
> That answer [HP] used to be spot on until about the year 2000.
I concur. I used to work at a printer company that competed directly with
them. Once I no longer had a free printer, i bought a *used* HP LaserJet 4MV
in 2006. It had been re
On 17.9.2020. 20:39, Brandon Woodford wrote:
> Hello,
>
> I've been trying to fix an issue with my Intel I350-T4 PCI Network card not
> being reported to the OpenBSD 6.7 system during boot. Looking through dmesg,
> I was not able to find any reference to the card or the em interface name
> tha
On 2020-09-17 12:15, Greg Thomas wrote:
I've always been happy with the cheap Brother laser printers with ethernet,
even with just their version of Postscript. But I believe they still sell
Postscript printers, too.
On Thu, Sep 17, 2020 at 10:07 AM Ingo Schwarze wrote:
Hi Carson,
Carson
I've always been happy with the cheap Brother laser printers with ethernet,
even with just their version of Postscript. But I believe they still sell
Postscript printers, too.
On Thu, Sep 17, 2020 at 10:07 AM Ingo Schwarze wrote:
> Hi Carson,
>
> Carson Chittom wrote on Thu, Sep 17, 2020 at 09:
Try
Getting the intel firmware from the intel download site or
>From your pci card manufacturer...
On Thursday, 17 September 2020, Brandon Woodford wrote:
> Hello,
>
> I've been trying to fix an issue with my Intel I350-T4 PCI Network card
> not being reported to the OpenBSD 6.7 system
Hello,
I've been trying to fix an issue with my Intel I350-T4 PCI Network card not
being reported to the OpenBSD 6.7 system during boot. Looking through dmesg, I
was not able to find any reference to the card or the em interface name that it
should have. I've also tried updating all firmware w
On 17/09/2020 10:40, Tom H wrote:
On Thu, Sep 17, 2020 at 9:33 AM Ottavio Caruso
wrote:
On 17/09/2020 00:58, Ashlen wrote:
On 20/09/15 05:49PM, Ottavio Caruso wrote:
Maybe it's just because OpenBSD sh is just ksh in disguise or there
might be other reasons that I obviously don't know.
Yep,
Hi Carson,
Carson Chittom wrote on Thu, Sep 17, 2020 at 09:51:45AM -0500:
> Jan Stary writes:
>> Can people please recommend a home laser printer
>> that is known to work well with OpenBSD?
>>
>> I would like to avoid cups, and possibly a2ps
>> and foo* and if= and all that dance
>> - a printer
Jan Stary writes:
Can people please recommend a home laser printer
that is known to work well with OpenBSD?
I would like to avoid cups, and possibly a2ps
and foo* and if= and all that dance
- a printer that speaks postscript and is as easy as
lp:lp=/dev/lp:sd=/var/spool/output/lpd:lf=/var/lo
On Thu, Sep 17, 2020 at 03:46:25PM +0200, Jan Stary wrote:
> Can people please recommend an USB camera
> that is known to work well with OpenBSD?
I have a Logitech C310 USB webcam that works well for my purposes.
It's 720p. Note I haven't used the mic, as I have a separate USB mic.
> Are they gen
On Thu, 17 Sep 2020, Jan Stary wrote:
> Can people please recommend an USB camera
> that is known to work well with OpenBSD?
>
> Are they generally better
> than the built-in laptop cameras?
>
> I might be forced to lecture online this upcomming semester,
> and tried the builtin mic and camera o
Can people please recommend a home laser printer
that is known to work well with OpenBSD?
I would like to avoid cups, and possibly a2ps
and foo* and if= and all that dance
- a printer that speaks postscript and is as easy as
lp:lp=/dev/lp:sd=/var/spool/output/lpd:lf=/var/log/lpd-errs:
Thanks,
Ja
Can people please recommend an USB camera
that is known to work well with OpenBSD?
Are they generally better
than the built-in laptop cameras?
I might be forced to lecture online this upcomming semester,
and tried the builtin mic and camera of a macbook.
Not horrible when close-capturing myself a
On Wed, Sep 16, 2020 at 11:52 PM Justin Noor
wrote:
> We need to create a partition on an OpenBSD server for the sole purpose of
> mounting RAID arrays.
>
> The mount point would be something like:
>
> /data
>
> Then we will create directories in that partition and mount the arrays:
>
> /data/rai
On 17/09/2020 00:58, Ashlen wrote:
On 20/09/15 05:49PM, Ottavio Caruso wrote:
Maybe it's just because OpenBSD sh is just ksh in disguise or there
might be other reasons that I obviously don't know.
Yep, you're right. They share the same inode.
ls -li /bin/{,k}sh
77862 -r-xr-xr-x 3 root bin
On Thu, Sep 17, 2020 at 9:33 AM Ottavio Caruso
wrote:
> On 17/09/2020 00:58, Ashlen wrote:
>> On 20/09/15 05:49PM, Ottavio Caruso wrote:
>>>
>>> Maybe it's just because OpenBSD sh is just ksh in disguise or there
>>> might be other reasons that I obviously don't know.
>>
>> Yep, you're right. They
On Sep 16 20:30:45, justinnoor...@gmail.com wrote:
> Hello Misc,
>
> We need to create a partition on an OpenBSD server for the sole purpose of
> mounting RAID arrays.
>
> The mount point would be something like:
>
> /data
>
> Then we will create directories in that partition and mount the arra
21 matches
Mail list logo
